Top Co2 Torch parts

RX WELD Upgrade version Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Outfit With Portable Tool Bag

  • 【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • 【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • 【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
Check Stock

Treasure Gurus Green Rubber Statue Lady Liberty Torch Movie Theater Stage Prop Costume Accessory

  • Become the most iconic symbol of freedom when you use this rubber torch as a costume accessory.
  • Prop torch is made from hard rubber & features a realistic weathered copper-green finish with copper smudges.
  • Raise this replica prop torch as Lady Liberty on stage, in movies, or as part of a patriotic Halloween costume.
  • Give this rubber liberty torch as a patriotic gift to friends and family members.
  • 3D Statue of Liberty torch measures approximately 12", 4 1/4" in diameter, and ships brand new.
Check Stock

RX WELD Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Tool Set with Two Hose,Goggles,Regulator Gauges,Storage Case-Portable Cutting Torch Set Welder Tools

  • 【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • 【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • 【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
  • 【Complete Accessories】The portable oxy brazing welder features with hoses,welding and cutting torches,goggles,tip....
Check Stock

RX WELD Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Tool Set with Two Hose,Goggles,Regulator Gauges,Storage Case-Portable Cutting Torch Set Welder Tools Black

  • 【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • 【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • 【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
Check Stock

Rhinox Stainless Steel Needle Valve, Accurate CO2 Regulation in Solenoid Fish Tanks, Co2 Adjustment Valve, Used with Rhinox C02 Diffuser Set

  • Required To Regulate Co2 Flow Accurately — In order to properly monitor and adjust the flow of CO2 in your fish tank or aquatic plant environment, a CO2 diffuser set is necessary. An essential part of any functioning diffuser setup is a dependable adjustment valve. The Rhinox CO2 Needle Valve regulates the amount of CO2 that should be released into your aquarium water..
  • For Optimal Development Of Inhabitants — All plants undergo a photosynthesis process that requires CO2 which they convert into oxygen. Your fish, shrimp, and other aquatic pets need to inhale this oxygen in order to survive and also exhale the carbon dioxide. Monitoring and regulating the amount of CO2 in your aquarium is essential to growing happy aquatic plants and pets..
  • Durable Stainless Steel Interior With Aluminum Alloy — this valve is constructed with high-quality, reliable stainless steel and aluminum alloy. The Aquarium C02 Regulator Needle Valve is lightweight and easy to operate. The precise structure of the needle valve features a special metal grinded surface and finely detailed threading for secure closure..
  • Quick & Easy To Setup And Install — Ergonomically designed, the CO2 regulator valve quickly and easily installs into your CO2 diffuser set without the use of an....
Check Stock

MFL. CO2 Cannon 16-26 ft Fog Double Pipe CO2 Cryo Jet 30W for Halloween Stage Party Live Holloween Effect pack of 2

  • DMX CONTROL: The MFL Stationary CO2 Jet is DMX controlled or standard power on/off switched. When the fixture receives power, the valve will open. This is useful for use with a relay pack, power strip, or any other controllable power source..
  • SIMPLE OPERATION:The Club Cannon CO2 Jet comes equipped with a high pressure 15′ Co2 hose, quick connect fitting for easy setup & takedown. 50 pounds carbon dioxide cylinders can be used 11 times in this fog double pipe CO2 cryo Jet , and each spray usually takes 3 seconds.(carbon dioxide cylinders needs to be bought by the buyer).
  • QUIET: The Cryo CO2 comes with special nozzle design eliminates noise for quiet operation, the heavy duty metal base plate is designed to keep the jet in place while in use. However, each application is unique, so the base is removable, allowing a clamp to be attached, so the fixture can be hung from trussing.
  • EFFECT: This CO2 Cryo Jet projects a 16-26 feet high plume of CO2. Control your CO2 Cannon with DMX, or with any controllable power source..
  • BASICS: AC220V(±10%)or AC110V , 30Watt, Max Pressure:15Mpa ( RECEIVE in 5-10 days by DHL/UPS after order, Free cost of fix parts for 1 year .).
Check Stock

Argon Co2 Gas Flow Meter Scale Tester Measure Flowmeter for Mig Tig Welder Welding 1PK

  • Suitable for the Nozzle Caliber range of 4 - 30mm.
  • Flowmeter tester scaled from 0 - 25 litres per minute in one litre graduations, used for testing the gas flow at the Mig or Tig torch.
  • Simply place the tester over the Mig or Tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gases..
  • Designed to check gas flow on Tig or Mig torches..
Check Stock

Pro Bike Tool CO2 Inflator - Quick & Easy - Presta and Schrader Valve Compatible - Bicycle Tire Pump for Road and Mountain Bikes - Insulated Sleeve - No CO2 Cartridges Included (Black)

  • ...lve stem. No CO2 cartridges included, CO2 cartridges sold separately..
  • Save Money in The Long Term, Invest In The Best - Why spend money on a cheaper CO2 inflator which will inevitably fail when you need it the most! This CO2 inflator is made from superior quality CNC machined aluminum alloy with durable and precise parts, which is built to last, so you can have a safe & enjoyable ride. Important: For safety reasons - do not screw in and store a CO2 cartridge into the inflator head until needed for operation. Care & respect should be taken when using CO2 gas..
  • Pro Quality – We are so confident about the quality of our products that if you have any product issues, we’re very happy to either provide a Refund or a Replacement! We recommend only using premium quality threaded CO2 cartridges for 'best performance', such as PRO BIKE TOOL’s threaded 16g CO2 cartridges. Note: Using low quality CO2 cartridges with potentially poor quality threads and seals can potentially damage the CO2 inflator head and therefore ‘fail’ when most needed!.
Check Stock

Pro Bike Tool CO2 Inflator - Quick & Easy - Presta and Schrader Valve Compatible - Bicycle Tire Pump For Road and Mountain Bikes - Insulated Sleeve - No CO2 Cartridges Included

  • ...lve stem. No CO2 cartridges included, CO2 cartridges sold separately..
  • Save Money In The Long Term, Invest In The Best - Why spend money on a cheaper CO2 inflator which will inevitably fail when you need it the most! This CO2 inflator is made from superior quality CNC machined aluminum alloy with durable and precise parts, which is Built To Last, so you can have a safe & enjoyable ride. Important: For safety reasons - do not screw in and store a CO2 cartridge into the inflator head until needed for operation. Care & respect should be taken when using CO2 gas..
  • Pro Quality – We are so confident about the quality of our products that if you have any product issues, we’re very happy to either provide a Refund or a Replacement! We recommend only using premium quality threaded CO2 cartridges for 'best performance', such as PRO BIKE TOOL’s threaded 16g CO2 cartridges. Note: Using low quality CO2 cartridges with potentially poor quality threads and seals can potentially damage the CO2 inflator head and therefore ‘fail’ when most needed!.
Check Stock

Thinvik CO2 Bike Tire inflator Pump-Compatible with Presta & Schrader Valve Insulated Sleeve. Portable Bicycle Tools CO2 Tires Inflator Kits for Road and Mountain Bikes-No CO2 Cartridges Included

  • 【Safe & Secure 】The CO2 inflator is made from superior quality CNC machined aluminum alloy with durable and precise parts, which is built to last, so you can have a safe & enjoyable ride. . Rubber EVA Foam sleeve (for 16g cartridges only) included - no frozen fingers when operating.Note: Once the CO2 is released, the cartridge and inflator head will get extremely cold, so it pays to use the insulate sleeve(include) to protect your hands..
  • 【Compatible With】CO2 Inflator fit Presta & Schrader valve-Connection with No Leaks Inflator head designed for any size of 'threaded' CO2 cartridges (12g, 16g, 20g & 25g)(Not compatible with valve extenders. ).
  • 【Quick Inflation】The bike Co2 tire pump inflate flat tire in a matter of seconds with little effort. Control lever operation regulates speed of CO2 release for precisely controlled inflation. Twin valve head threads onto either Presta & Schrader valves with no valve head switching needed..
  • 【Compact&Lightweight】Small, Compact & Lightweight-, and CO2 cartridges are smaller and lighter than a hand pump, easily fitting into a saddle bag or jersey pocket..
  • 【Important Note】Using low quality CO2 cartridges with potentially poor quality threads and seals can potentially damage the CO2 inflator head and....
Check Stock

Taprite WYE'd Dual Check Valves Beer Regulator - Draft Beer and Homebrew Keg Co2 Cylinder Tank Pressure Regulator and Gauge

  • ...k Valves Beer Regulator. As you turn each valve, the pressure gradually increases or lowers, making it much easier to calibrate the output pressure to your desired level..
  • REBUILD KITS AVAILABLE - Our Beer CO2 Regulator with WYE have rebuild kit available so you won't have to get a whole new replacement if some parts eventually wore out. The beer regulator's worn or broken parts and equipment such as the nipples, valve, and gauge are easy to configure, replace and fix!.
  • BUILT IN SEAL TO PREVENT LEAKS - With this draft beer dispenser CO2 regulator, there is no need to use a washer because the rubber O-ring seal is built-in that prevents leaks from the cylinder tank to the keg. This regulator also includes dual outlet valves to separate shutoffs for each line of your homebrew..
Check Stock

WeldingStop Plasma Consumables Fit Miller Spectrum 3080 Cutter ICE-80CX Torch 212724 Electrode 212726 Tip Drag Shield 212730 PKG/25

  • The electrodes and tips in the list can be used on Miller Spectrum 3080 Plasma Cutter ICE-80CX Torch (Torch Ref. Number: 216300, 218044).
  • This list contains 10 x 212724 Plasma Electrode.
  • And 10 x 212726 Plasma Tip / Nozzle + 5 x 212730 Plasma Drag Shield Cup.
  • The Nozzles or tips plasma cutting current need under 80A.
  • All the plasma cutting torch consumables for ICE-80CX torch are Replacement Parts, NOT Miller Original Kits.
Check Stock