Top Co2 Valve

Thinvik CO2 Bike Tire inflator Pump-Compatible with Presta & Schrader Valve Insulated Sleeve. Portable Bicycle Tools CO2 Tires Inflator Kits for Road and Mountain Bikes-No CO2 Cartridges Included

  • ... ride. . Rubber EVA Foam sleeve (for 16g cartridges only) included - no frozen fingers when operating.Note: Once the CO2 is released, the cartridge and inflator head will get extremely cold, so it pays to use the insulate sleeve(include) to protect your hands..
  • 【Compatible With】CO2 Inflator fit Presta & Schrader valve-Connection with No Leaks Inflator head designed for any size of 'threaded' CO2 cartridges (12g, 16g, 20g & 25g)(Not compatible with valve extenders. ).
  • 【Quick Inflation】The bike Co2 tire pump inflate flat tire in a matter of seconds with little effort. Control lever operation regulates speed of CO2 release for precisely controlled inflation. Twin valve head threads onto either Presta & Schrader valves with no valve head switching needed..
  • 【Compact&Lightweight】Small, Compact & Lightweight-, and CO2 cartridges are smaller and lighter than a hand pump, easily fitting into a saddle bag or jersey pocket..
  • 【Important Note】Using low quality CO2 cartridges with potentially poor quality threads and seals can potentially damage the CO2 inflator head and therefore ‘fail’ when most needed!.
Check Stock

AQUATEK CO2 Regulator Mini

  • Connect to paintball CO2 tank, no adapter required, no assembly required. (PLEASE NOTE: Paintball tank is NOT included, for demonstration purposes only). Please fill up your paintball CO2 tank if you purchased the tank online (e.g. Amazon) before using the regulator. The paintball CO2 tank is shipped empty due to safety concern..
  • Precision needle valve for fine tuning release of CO2.
  • Include bubble counter with integrated check valve.
  • Compatible with most CO2 atomizer and diffuser.
Check Stock

FZONE 2.5L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator and Needle Valve for Aquarium Plants Tanks

  • PROFESSIONAL! Professional CO2 generator system with SUS304 stainless steel bottle, regulator, bubble counter, safety valve. Far better than simple plastic bottle generators: more reliable, steady, durable, efficient..
  • SAFE! The bottle body adopts 1.5mm thickness SUS304 stainless steel(more 25% thickness than normal 1.2mm), blasting pressure up to >80kg/cm2(1137PSI), Safety valve will open automatically when it exceeds the safe pressure..
  • NEEDLE VALVE WITH BUBBLE COUNTER! Together with bubble counter, you can read your co2 flow rate directly via the bubble counter. Bubble counter with check valve function, stop water backflow to bottle. Aquarium specific needle valve, High precision fine-tuning easy for co2 to be 1 bubble in 3 seconds..
  • OPTIONAL MINI DC 12V SOLENOID! You can choose a 12V DC solenoid valve with the generator, will automatic turning on/off CO2 output with timer..
  • ATTENTIONS: Solenoid NOT included, need order seperately..
Check Stock

ZRDR CO2 Regulator Aquarium 12V DC CO2 Solenoid Pressure Adjustable with Big Dual Gauge Display, Bubble Counter, Check Valve, Aquarium Co2 Kit Fits Standard US Tanks Side and Up Open Cylinder

  • Adjustable Direction – The fine-tuning valve has a flexible design and can freely adjust its direction. This aquarium co2 regulator kit is also suitable for side-opening cylinders and cylinders with top-opening bars. This mini series aquarium carbon dioxide regulator have more cost-effective.
  • Waterproof Solenoid Valve – Our co2 solenoid valve adopts the new integrated injection molding technology, which is waterproof and not easy to fall off, effectively prolonging the service life. 12 DC split-type solenoid instead of AC models, more safe and stable. Low power consumption solenoid which low noise and temperature.
  • High Precision Details – Our aquarium co2 kit is a super-suit for the aquarium or your fish tank. High precision fine-tuning easy for CO2 to be 1 bubble in 3 seconds. Bubble counter with check valve function, stop water backflow to co2 tank.
  • Strong Compatibility – The CO2 regulator aquarium is compatible with most brands of high-density tubing to inject your aquarium with CO2 quickly and easily. It also works well with most CO2 atomizers and diffusers and US standard CGA320 CO2 tanks.
  • Durable And Easy To Install – Made of hard aluminum alloy, not easy to rust, Increase usage time. Package with installation instructions and product det....
Check Stock

ZRDR 4L Co2 Generator System with Dual Gauge Display Pressure Gauge,DIY Co2 Generator System Kit, Automatic Pressure Relief Valve Bubble Counter for Plants Aquarium, Stable Output

  • ... 【New upgrade bubble counter】As the water of the co2 generator system bubble counter evaporates quickly, In view of this, we have carried out a new upgrade to the bubbler. The bubble gauge is equipped with a syringe, which can be directly used to inject water (there is a one-way valve inside the generator, only into the water without leakage). And you can also add water during use, no need to close the air outlet, no need to remove the air tube, convenient for your use.
  • 【Safety protection】 The zrdr co2 generator system 4l with automatic pressure relief valve, when the pressure in the cylinder exceeds 70KG will automatically release the pressure. A co2 generator system with a 12V waterproof solenoid valve, make you away from the danger of solenoid valve leakage, protect your safety.
  • 【Refine The Bubbles】Our CO2 aquarium kit is equipped with an atomizer, which can purify bubbles, make them easily soluble in water and absorbed by plants, and make your aquarium full of vitality. We also gave you an extra atomizer as a replacement to extend the service life of the product. When using this product for the first time, there will ....
Check Stock

SKYTOU Dual Gauge CO2 Regulator, Keg Beer Regulator CGA-320 Inlet for Draft Beer Homebrew Kegerator Dispensing Regulator

  • ...of this CO2 regulator shows you how much pressure is being provided to the kegs, the side gauge(0-3000psi) of this CO2 regulator shows you how much CO2 is left in your cylinder/tank..
  • ❤【Compatible & Safe】: This CO2 regulator works with any CO2 tank with a CGA-320 valve. It comes with a CGA-320 Female thread and a shut off valve allows you to turn the gas flow on / off and prevents liquid from backing into the regulator..
  • ❤【Premium Material】: The Draft Beer Dispensing CO2 Regulator adopts to food grade high-strength copper chrome decompression material and sturdy rubber boots that help protect them from damage. And Inside Safety Pressure Relief Valve springs also have high fatigue strength and durability..
  • ❤【Easy To Install】: Slap this CO2 regulator on a food grade CO2 tank, connect a gas line ( ID 5/16' or 3/8”) and carbonator, and you have a lot cheaper carbonated water than buying carbonated water bottles directly..
  • ❤【Suitable Occasions】: Particularly suitable in a Shop,Bar,Home,Out Door,Plants etc. (Note: Please don’t increase the pressure ad....
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • ...re a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • [Safety First]Automatic pressure relief valve, when the pressure of the inside co2 steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • [Refine The Bubbles]Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • [Low Cost]You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • [Complete Accessories]Steel bottle, Stainless steel pressure reducing valve, Filter, ....
Check Stock

ZRDR CO2 Generator System Carbon Dioxide 2L with Dual Gauge Display Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Plants Aquarium Stable Output

  • PROFESSIONAL FACTORY - We are a manufacturer specializing in CO2 generator system. Our CO2 generator system is made of 304 stainless steel, far better....
  • SAFE PROTECT - Automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V....
  • REFINE THE BUBBLES - OUR CO2 generator system equipped with the atomizer, refine the bubbles and make it easy to dissolve in water and be absorbed by....
  • LOW COST - Generates CO2 on your own: you only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the....
  • COMPLETE ACCESSORIES - steel bottle, Stainless steel pressure reducing valve, Filter, Bubble counter, Solenoid valve, Solenoid valve power supply,....
Check Stock

Keenso Co2 Tank Valve Adapter, G1/2 Copper Outdoor Durable Inner Thread CO2 Tank On/Off Valve Controller with 1500 Psi Gauge

  • 【High-quality materials】The valve is made of high-quality copper material, which is strong, durable and has a long service life..
  • 【Co2 control】This is a replacement valve for your CO2 cylinder. With this on/off valve you will able to control the CO2 output better..
  • 【Easy on-off valve】Simple on-off valve adapter that allows you to turn on/off your tank with a quick turn..
  • 【With1500 Psi gauge】This adapter also has a 1500 Psi gauge which allows you to know how much pressure is left in your tank..
  • 【Stable performance】The valve is professionally manufactured with stable performance and high reliability..
Check Stock

Zerodis Aquarium CO2 Generator, DIY Aquarium Planted Tank CO2 System Kit Tube Valve Guage Bottle for Aquarium Moss Plant Tank

  • co2 diffuser.As an indispensable role to the photosynthesis of water plants, this CO2 generator main for provide a real environment for plants’ growing.diy co2 kit.
  • aquarium co2 system.The pressure principle push the acid liquid into the small soda liquid,the two liquids reacting to produce continuous carbon dioxide.co2 aquarium kit.
  • aquarium tools.The CO2 DIY kit is with ABS engineering plastic cover, with locking pipe device to ensure non-deformation, non-loose, non-slip wire when working.And it’s with professional metal material gas adjusting valve to ensure pure CO2 DIY.diy co2 aquarium kit.
  • This CO2 Generator System Kit is with Pressure gauge for pressure display,gas adjustable function,and simple pressure relief, easy to operate, safe and practical advantages! Once start, sustainable gas supply!co2 regulator adapter.
  • Trimming valve regulation avoid by sudden big or small, can’t suddenly turn up, after immediately shut down again, so as not to cause abnormal pressure to the bottle.co2 diffuser.
Check Stock

Aquarium DIY CO2 Generator System Kit CO2 Generator System with Solenoid Valve Bubble Counter Check Bubble Diffuser Carbon Dioxide Reactor Kit for Plants Aquarium

  • ✪【Be made of aluminum alloy】It is strong, durable and efficient. Well-sealed caps and pipes, leak-proof, non-deformed, never loose. Professional pressure guage for pressure watching. Cheap, simple to create pure CO2 constantly by chemical reactions..
  • ✪【Solenoid valve】To control the on and off of CO2 generator system using with a timer(not included). Bubble counter with check valve: Flow-rate of CO2 gas indication device and prevent water flow back into the bottle..
  • ✪【Equipped with a safety valve】The pressure is greater than 4kg pressure will relief automatically, carbonated beverage bottle pressure is 8kg, safety is ensured..
  • ✪【The safety valve supports manual pressure relief】When the pressure is below 4kg, it can be manually relieved by pull the ring of the safety valve. It is very safe..
  • ✪【Come with a bubble diffuser】Refine the bubbles and make it easy to dissolve in water and be absorbed by plants. Inject to your aquarium with CO2 quickly and easily..
Check Stock

CO2 Inflator and Tubeless Tire Repair Kit - Presta & Schrader Valve Compatible - Bicycle Tire Pump for Road and Mountain Bikes - No CO2 Cartridges Included

  • 【Get Back Riding Fast】: The Bike Tire Repair Tool Set (CO2 Inflator / Tubeless tire repair kit / Valve stem core removal tool) made from superior quality CNC machined aluminum alloy with durable and precise parts. Repair your tire in a matter of minutes. Simply plug the hole and be back on the road or trail again. Perfect for whether your going on tough mountain range rides, or in need of fast air pressure during hot pursuit racing!.
  • 【Compact and Lightweight】: This CO2 inflator works with both threaded or unthreaded 16g Cartridges. So compact that it will easily fit in your saddle pouch, jersey pouch, or mount onto your bike frame(bracket included). Designed to work with threaded Presta & Schrader tire valve types. No adapters needed! Simply drop the CO2 cartridge into the cup, screw on the head, attach to valve, slowly turn the lever to release air. So quick and easy you’ll be back to riding your bike in no time!.
  • 【Repair a Hole in Seconds】: This Tubeless tire repair kit contains essential tools. Besides the essential tire reamer and plug fork tools, this tubeless tire repair kit features a valve stem core removal tool that will allow you to remove the valve stem core and insert maximum, unrestricted air pressure to seat the bead and air....
Check Stock