Top Coarse threaded Cap Nuts

Gas Can Spout Replacement ,Gas Can Nozzle,(2 Kit-White) with 4 Screw Collar Caps(2 Coarse Thread &2 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps,Thick Rubber pad,Spout Cover,Base Caps

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas con vent caps, (Gas Con Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Con....
Check Stock

Boltmaster 11002 8/32 X 12 Threaded Rod NC Zinc Pack of 10

  • Zinc plated. Steel Threaded Rod The most economical and most common form of steelworks threaded rod..
  • Should not be welded. Typically used by the plumbing and contracting trades..
  • Threaded steel rod. Used in maintenance departments in various applications..
  • Coarse threaded. Threaded steel rod coarse style steel rod Should not be welded..
  • High Quality, provides great strength and protection against corrosion to make these machine nuts last!.
Check Stock

12 Pack 8/32 Inch M4 Threaded Rod with Hex Nuts 12 Pcs M4 Stainless Steel Threads Studs Rods 12 Pcs M4 Stainless Steel Fully Threaded Hex Nuts for Beaded Garden Stake Rods (12 Inch)

  • ...nd 12 pieces of M4 hex nuts, a total of 24 pieces, a nice set is ideal for making a dozen (fairy garden stakes)fairy garden stakes or the other projects.
  • Dimension: the threaded rod is about M4 in thread diameter, 300 mm/ 12 inch in total length.
  • The hex nut is about M4 in coarse thread diameter, 0.7 mm/ 0.03 inches in pitch, 0.28 inch/ 7 mm in width across flat, and 0.11 inch/ 2.8 mm in height.
  • Threaded Rods Studs: the 8/32 threaded rod is made of 304 stainless steel, safe, sturdy, with corrosion resistance and antirust ability, and can offer you a long time service.
  • It can be applied for assembly fastening, just screw it into threaded nuts or tapped holes.
  • Hex Nut: the hex nut is an ideal replacement for industrial and construction fasteners and an essential accessory in your daily life, simply screwing it onto a bolt, cap screw or threaded rod of the same thread size, quick and easy.
  • Widely Applicable: these fairy stake rods can be widely applied to bolts, clamps, hangers and U bolts and many more projects where a metal rod with continuous threading or no head or fashioned ....
Check Stock

Hillman 150009, 3/8 X 16-Inch, 100-Pack Coarse Thread Hex Nuts, 3/8'-16, Steel, 100 Pieces

  • Zinc coating for a corrosion resistant finish.
  • USS coarse nuts for coarse threaded bolts.
  • Be sure not to strip your nuts by over tightening.
  • Use a nut that is consistent with your other fasteners.
Check Stock

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

  • Gas Can Spout Replacement kit,Suitable for most 1/2/5/10 gallon oil cans, We provide 12 threaded collar caps 6 Coarse Thread & 6 Fine Thread . As shown in the picture The internal thread size is 1-3/4--1.7in , It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
Check Stock

Westbrass D398R-07 1-1/2 NPSM Coarse Thread Mushroom Tip-Toe Bathtub Drain Stopper 1-Pack Satin Nickel

  • 1-1/2 in. NPSM Coarse thread tip-toe bathtub drain.
  • Coarse thread drain shoe. NOTE: Be sure to measure to assure correct size (Coarse or Fine).
  • 1-1/2 in. NPSM (1-7/8 in. - 11-1/2 UNC) exterior.
  • European style round full cover mushroom cap. Push down cap to close and restrict draining water.
Check Stock

Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gallon oil cans, We provide 6 threaded collar caps 3 Coarse Thread & 3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,4 Each set of products....
Check Stock

33Pcs Gas Can Nozzle Replacement, Gas Spouts for Gasoline 5 Gallon, Old Style Gas Can Spout Kit with Flexible Nozzles, Screw Collar Caps, Thicker Gasket, Spout Cap, Drill Bit and Fuel Vent Caps in Two Models Fit Most of Cans, Tightly Fitted, Smoot...

  • 【33pcs gas can spout replacement】Suitable for most 1/2/5/10 gal gas tanks. Jake.secer gas tank nozzle kit including 4 flexible new pour spouts with rubber gaskets, 8 screw collar caps( 4 Coarse Thread & 4 Fine Thread), 4 spout caps, 4 sealing gaskets for spout caps, 4 gasket stoppers for gas can vent caps-B, 8 vent caps in two models suit for most oil cans and 1 drill bit of the proper size, so that you can install vents on your plastic gas cans much easier..
  • 【High Quality & Easy to Use】Jake.secer gas can spouts are made from high-quality HDPE materials.It has excellent durability and bendable.The spouts also include thicker and widen rubber gaskets to help ensure a good, tight fit to the cans. Definitely easy to use, all seals worked great, easy to install, great value for your money! Enjoy the "old school" design that actually prevents spills and leaks, even in transport or upside down..
  • 【1.75inches Nuts】The 8 Screw Collar Caps in this kit are all 1.75inches internal thread, 4 of the nuts have coarse thread and the other 4 have fine thread. They are only for 1.75inches diesel fuel cans mouth. Please measure the diameter of your gas tank mouth before purchase. With the correct match, these new nozzles are a time saver and will improve....
Check Stock

Prime-Line 9126651 Machine Screws, Pan Head, Phillips Drive, #4-40 X 2 in, Grade 18-8 Stainless Steel, (25-pack)

  • Use with nuts or pre-threaded holes of the same diameter and thread size.
  • Thread Type: Coarse, Thread Class: UNC-2A, Point Style: Blunt.
Check Stock

Prime-Line 9000496 Machine Screws, Flat Head, Phillips Drive, #6-32 X 3/8 in, Grade 18-8 Stainless Steel, (25-pack)

  • Use with nuts or pre-threaded holes of the same diameter and thread size.
  • Thread Type: Coarse, Thread Class: UNC-2A, Point Style: Blunt.
Check Stock

Prime-Line 9000710 Machine Screws, Flat Head, Phillips Drive, #8-32 X 3/8 inch, Grade 18-8 Stainless Steel, (25-pack)

  • Use with nuts or pre-threaded holes of the same diameter and thread size.
  • Thread Type: Coarse, Thread Class: UNC-2A, Point Style: Blunt.
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(3Kit-Yellow) with 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • Gas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans, female thread size as shown, please measure your gas cans spout mouth size before purchasing. The new upgraded coarse threaded can spout cap reduces the height of the thread cap to ensure that the cap can be completely sealed..
  • High quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps).
  • Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coa....
Check Stock