Top Coated Magnet Wire
Bare Copper Wire, Bright, 20 AWG,0.032\ Diameter, 328' Length
- [Professional Maintenance]: This copper wire is a copper wire coated with a very thin insulating layer which is a professional maintenance for transformers, motors, and other precision motherboards.
- [Direct Welding without Scraping Paint]: This soldering copper wire is easy to use and can be used directly without rubbing the isolation layer, which effectively improves the use efficiency.
- [Sufficient Length]: There are 5 enameled magnet wires, each of which is about 15 meters long and can be used for a long time.
- [Convenient Storage]: This winding wire copper includes a black storage ring on which the copper wire is wound for storage and use.
- [High Conductivity Copper]: This copper coil is made of high conductivity copper, which has a good effect.
Check StockFender Tex-Mex Strat Pickups
- Produces the characteristics of a vintage-style Stratocaster..
- Alnico V magnets with Polysol-coated magnet wire..
- The Fender volume pedal, the sleekFender volume tone pedal gives you masterful, zen-like control over both volume and, um, tone..
- Tilt this bad boy back and forth to reign supreme o'er the kingdom of volume.
Check StockFender Custom Shop 62 P Bass Pickups
- Enamel-coated magnet wire and cloth-covered output wires.
- Deliver the full, booming lows, punchy midrange and clear high end of the bass that started it all.
- DC Resistance: 10.5K, Inductance: 5.9 Henries.
Check StockAmerican Bass XR15D4 15 3000 Watts Dual 4 Ohm 3 Voice Coil
- 1500 Watts RMS 3000 watts peak 300 oz magnet coated paper cone direct 8 gauge speaker wire.
- Superior quality performance and reliabilitySpecifications.
Check StockFender Ultra Noiseless Vintage Jazz Bass Pickups
- Alnico 5 magnets for greater focus and enhanced dynamics.
Check StockFender 75 Jazz Bass Bridge Pickup
- The Original Jazz Bass pickups deliver the low-end growl and up-front midrange punch that makes the Jazz Bass as popular today as it was when it was introduced over forty years ago.
- These pickups are make with flush-mounted Alnico 5 magnets, enamel-coated magnet wire, and a copper shield.
- Bridge: DC Resistance: 7.5K, Inductance: 3.35 Hernias.
Check StockCar Eight Way Speaker System – Pro 6 x 9 Inch 500W 4 Ohm Mid Tweeter Component Audio Sound Speakers For Car Stereo w/ 120 Oz Magnet Structure, 3.55” Mount Depth Fits Standard OEM – Pyle PLG69.8 (Pair)
- ...ak power w/ 250 watt RMS, your car stereo can deliver with rubber magnet boot cover.
- 120 OZ MAGNET: The 8-way car speaker system has 120 oz. magnet structure that completes the package. Helps to provide smooth, loud & detailed sound. Additional features include 45-22KHz frequency and 3.55” mounting depth w/ yellow coated steel basket.
- 0.5” NEODYMIUM TWEETER: The non-fatiguing butyl rubber surround keeps your speakers secure & extends its life. Supported by 0.5” neodymium dome tweeter for sweet highs, high temp aluminum voice coil, 2” polymer cone midrange & 5 x super film tweeter.
- INSTALLATION HARDWARE INCLUDED: This pair of Pyle eight-way car speakers feature a strong capacitor for an excellent performance. It comes with custom grills, wires, and installation hardware for easy and hassle-free setup.
- Standard 6”x9” Size Fits OEM Locations – 5 x Super Film Tweeter – Rubber Magnet Cover – Mounting Depth: 3.55″.
- Yellow Color Poly Injected Cone – High Temperature Aluminum Voice Coil – Power Handling: 250 Watts RMS /500 Watts Peak.
- Non-Fatiguing Butyl Rubber Surround – Strong Capacitor for Excellent Performance – Frequency Response: 45-22KHz.
- 2” Polymer Cone Midrange – Yellow Coated Steel Basket – Impedance: 4 Ohms.
Check StockAmerican Bass TITAN1544 15 Woofer 800w Rms/1600w Max Dual 4 Ohm Voice Coils
- 1500 Watts RMS 3000 watts peak 300 oz magnet coated paper cone direct 8 gauge speaker wire.
- Superior quality performance and reliabilitySpecifications.
Check Stock1763LBS Pulling Force(800KG) Powerful Round Neodymium Magnet with Countersunk Hole and Eyebolt, 5.35' Diameter, Great for Salvage or Magnetic Fishing-The Largest Magnet On Amazon (136MM)
- Extremely strong Neodymium Magnet with up to 1763 lbs pulling force on contact with 0.78" thick steel.
- Magnet coated design: Ni+Cu+Ni Triple Layer Coated. The Best Coating Available, which Provides a Shiny and Rust Resistant Coated steel cup provides protection for the magnet and helps to prevent chipping or cracking..
- This Round Neodymium Magnet can be used fishing eyebolt, screws, hooks, fasteners, adsorption in warehouse or anywhere you need an incredibly strong magnet..
- High Quality: Magnet is neodymium iron boron (NbFeB) rare earth with Nickel-Copper-Nickel coated steel cup.
- 100% Quality Guarantee, 180 Days Money Back Guaranteed!.
Check StockFender Gen 4 Noiseless/Shawbucker Prewired HSS Stratocaster Pickguard - 3-Ply Black
- Shaw bucker 1 Bridge and Gen 4 noiseless middle/neck pickups.
- Sb 1 - Alnico 2 magnets for sweet, musical sound.
- Low-output pickup with enamel-coated magnet wire for vintage-style tone.
- Gen 4 noiseless - noise-free, vintage-style single coil tone.
Check StockULIBERMAGNET 4Pack Anti-Scratch Neodymium Magnet with Rubber Coated and M6 Male Thread,Super Strong Magnetic Mounting for Lighting,Camera,Tools and equipement
- 【Much Stronger of Neodymium Rubber Coated Magnet】: 26lb Vertical Magnetic Pull Force On Base of 0.33''(10mm) Thickness Steel Plate due to....
- 【No scratch and bigger friction of mounting magnet】: The Soft rubber can protect the magnet from damage , avoid scratch of painting surface and....
- 【Much More Compatible Neodymium Cup Magnet with stud】: M6 standard male thread stud,much more compatible for kinds of hardware assembly. Great for....
- 【Good Corrosion-Resistance of Rubber Coated Neodymium Magnet】: Ni+Cu+Ni Triple Layer good corrosion-resistance coating, the exterior rubber....
- 【Package Includes of magnet with male thread】: 4pcs Rubber Coated Magnet 26lb +M6 Spring Washer+M6 Flat Washer+Nut included.
Check StockULIBERMAGNET 4Pack Anti-Scratch Mounting Magnets Strong 24LB M6 Male Thread Stud Rubber Coated Neodymium Magnets with Stud for Mounting led Lighting Fixtures Holding Tools and Organiazation Items
- 【Much Stronger of Neodymium Rubber Coated Magnet】: 24lb Vertical Magnetic Pull Force On Base of 0.33''(10mm) Thickness Steel Plate due to....
- 【No scratch and bigger friction of mounting magnet】: The Soft rubber can protect the magnet from damage , avoid scratch of painting surface and....
- 【Much More Compatible Neodymium Cup Magnet with stud】: M6 standard male thread stud,much more compatible for kinds of hardware assembly. Great for....
- 【Good Corrosion-Resistance of Rubber Coated Neodymium Magnet】: Ni+Cu+Ni Triple Layer good corrosion-resistance coating, the exterior rubber....
- 【Package Includes of magnet with male thread】: 4pcs Rubber Coated Magnet 24lb +M6 Spring Washer+M6 Flat Washer+Nut included.
Check Stock