Top Cobalt Magnet

Cobalt Rounds (1 Pound | 99.9+% Pure) Raw Cobalt Metal by MS MetalShipper

• ✔️ Cobalt Rounds (1 Pound | 99.9+% Pure) Our Cobalt Rounds are all sourced directly from the Vale Mining Group in Canada where they are produced and are 100% “virgin” metal (not recycled). We sell this metal by the pound, so if you need 10lbs, simply add a quantity of 10 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per pound..
• ✔️ USAGE - This is very high purity cobalt that can be confidently used in any application where cobalt is required. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Our 1lb of cobalt rounds - each cobalt round is approximately 1.25 inches in diameter and .25 inches thick..
• ✔️ SPECIFICATIONS - Atomic Number = 27 | Melting Point (F) = 2723 | Atomic Mass= 58.93 | Boiling Point (F) = 5275 | Density (g/cm3) = 8.9 | Analysis: COBALT 99.9974%, NICKEL 0.0950%, OXYGEN 0.0050%, CARBON 0.0025%..
• ✔️ PACKAGING - This 1lb of cobalt rounds will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..

Drill Hog 37 Pc Cobalt Drill Bit Set Index M42 1/16" - 1"

SP Bel-Art Spinbar Teflon Elliptical (Egg-Shaped) Magnetic Stirring Bar; 41.3 x 19mm, White (F37130-0158)

• Egg shape (also called an elliptical shape) has a rounded pivot point to reduce friction, for use in round containers.
• Teflon (PTFE) casing is chemically inert, can be used with corrosive chemicals, and helps reduce friction and wear while spinning.
• Smooth surface provides quicker cleanup and less risk of cross-contamination than bars with pivot rings.
• Internal magnet made from alnico V, an alloy of aluminum, nickel, iron, and cobalt.
• Casing material is approved for use in food, drug, and cosmetic applications.

SP Bel-Art Spinbar Teflon Micro (Flea) Magnetic Stirring Bar; 3 x 3mm, White (F37119-0003)

• Round, cylindrical shape provides better centering and creates less turbulence than a multisided shape.
• Teflon (PTFE) casing is chemically inert, can be used with corrosive chemicals, and helps reduce friction and wear while spinning.
• Smooth surface provides quicker cleanup and less risk of cross-contamination than bars with pivot rings and allows the bar to spin on the bottom of the container to disperse light sediment and air bubbles.
• Internal magnet made from alnico V, an alloy of aluminum, nickel, iron, and cobalt.
• For stirring small volumes of liquid in containers such as test tubes, vials, and gradients.

J.W. Winco 58-AN-19 GN58 Pot Magnet Assembly with Thru Hole, 0.75\ Diameter, 0.15\ Thru Hole, 0.30\ Thickness, Steel/Aluminum Housing, Nickel and Cobalt Combination AlNiCo Magnet (AN Type), Red Lacquered Finish

• Housing: Steel, Magnet: Aluminum, nickel and cobalt combination AlNiCo Red lacquered finish.

Drill America - DWDCOFP12 F Cobalt Drill Bit (Pack of 12), DWDCO Series

• 13 pc Set High Speed Steel M42 Cobalt NAS 907J 135-Degree Split Point.
• 135-Degree split point for accurate centering and fast penetration.
• Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance.

Ernie Ball Regular Slinky Cobalt Electric Guitar Strings 3-pack 10-46 Gauge P03721

• 3 individual sets of Regular Slinky Cobalt electric guitar strings.
• Cobalt produces a stronger magnetic relationship between pickups and strings, resulting in increased output.
• Cobalt electric guitar strings provide an extended dynamic range, incredible harmonic response, strong low end, and crisp, clear highs.
• Wound strings consist of Ernie Ball’s Cobalt alloy wrapped around a tin-plated high-carbon steel core wire.
• Made in California, USA with the finest and freshest materials.

Viking Drill and Tool by Norseman 69280 Type 240-D 135 Degree Split Point Cobalt Jobber Gold Finish Drill Set (115 Piece)

• 115 pc Set High Speed Steel M42 Cobalt NAS 907J 135-Degree Split Point.
• 135-Degree split point for accurate centering and fast penetration.
• Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance.

Drill Hulk 13-Piece M35 Cobalt Drill Bit Set for Hard Metal, Stainless Steel, 1/16-Inch to 1/4-Inch, Jobber Length, 3-Flat Shank

• JOBBER LENGTH: jobber length cobalt drill bit, 135 degree split point reduces drill walking, 3-flat shank provides a secrue grip in chucks.
• MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
• CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
• APPLICATION: best used for drilling in hard metal, including stainless steel.
• INCLUDE: 13 pieces cobalt drill bits in inch sizes 1/16" to 1/4" (1/64" increments) with plastic case.

Cobalt Drill Bit Set M35 High Speed Steel Twist Drill Bit Set for Hardened Metal Stainless Steel Cast Iron Woodwork Plastic (30 Pieces,1/8 Inch)

• Quality material: the cobalt drill bit set uses cobalt M35 high speed steel as material, this material is reliable and practical, with a long service use, heat and abrasion resistance.
• The cutting edge of drill bit is hardened and honed, with accurate cutting without shaking.
• Creative twist design: metal cobalt drills for hardened steel has 135 degrees split point tip and torsional design to improve cutting speed with self-centering ability.
• They can avoid walking during work process, while clearing chips and particles more quickly and easily.
• Nice features: the nice twist drill bits have precise diameter.
• M35 cobalt drill bits for hardened metal are not easy to break or wear out, so suitable for lithium electric drill, hand electric drill, impact electric drill, etc..
• The size is small, please pay attention to use.
• Various fitness: M35 high speed steel cobalt drill set is nicely suitable for hardened material and hard metals, such as cast iron, high temperature alloy, hard plastics, stainless steel, titanium alloy, woods, etc., also for soft materials.
• What you will get: the package contains many cobalt drill bits, sufficient quantity to meet your various needs.
• Please pay attention to speed, pressure and heat control during drilling.

Cobalt Drill Bit Set M35 High Speed Steel Twist Drill Bit Set for Hardened Metal Stainless Steel Cast Iron Woodwork Plastic (15 Pieces,1/16 Inch)

• Quality material: the cobalt drill bit set uses cobalt M35 high speed steel as material, this material is durable, strong and practical, with a long service life, heat and abrasion resistance.
• The cutting edge of drill bit is hardened and honed, with accurate cutting without shaking.
• Creative twist design: metal cobalt drills for hardened steel has 135° split point tip and torsional design to improve cutting speed with self-centering ability.
• They can avoid walking during work process, while clearing chips and particles more quickly and easily.
• Nice features: the 1/16 inch twist drill bits have precise diameter.
• M35 cobalt drill bits for hardened metal are not easy to break or wear out, so suitable for lithium electric drill, hand electric drill, impact electric drill, etc..
• The size is small, please pay attention to use.
• Various fitness: M35 high speed steel cobalt drill set is greatly suitable for hardened material and hard metals, such as cast iron, high temperature alloy, hard plastics, stainless steel, titanium alloy, woods, etc., also for soft materials.
• What you will get: the package contains 15 pieces 1/16 inch cobalt drill bits, sufficient quantity to meet your various needs.
• Please pay attention to speed, pressure and heat control during drill....

STROTON Cobalt Drill Bit Set (1/16-1/4 Inch, 13PCS), M35 High Speed Steel Twist Drill Bits for Stainless Steel, Hard Metal, Cast Iron, Plastic and Wood

• 【Premium True 5% Cobalt Steel with 68 HRC】- The Marked Cobalt Content of Ordinary Drill Bits May be False, but This Drill Bits Set is Made of Cobalt Ore from Our Own Mine, Which Indeed Contains 5% Cobalt. Although the Cost and Price are Slightly Higher, It Usually is able to Provide 3X Heat,Wear and Chip Resistance and 3X Tool Life..
• 【Split Point Design and Fully Ground Process】- Compared with Other Ordinary Drill Bits, This Drill Bits Set is Particularly Suitable for Heavy Duty Work, Such as Cutting through Stainless Steel,Steel Plate,Iron Sheet, Cast Iron and Hardwood, and Drilling Out Bolts Studs and Screws..
• 【3X Efficiency + 3X Tool Life】- This Cobalt High Speed Steel Drill Bits Set is Typically Capable of Running 3 Times Faster. Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes..
• 【Sharp Drill Bit Edge】- This Kind of Drill Bits Beast Can Even Cut Hardened Metal into Long Iron Bars, While a Dull Drill Bit Can Just Slowly Wear Through Metal..
• 【13 Pieces Jobber Length Industrial Drill Bits Includes】:1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4 [DIA 1/64 Inch Increments].