Top Cockpit Panel Centering Tool

Osborn 77240SP NovoFlex Honing Tool, Silicon Carbide, 1200 Max RPM, 1.5\ Hole Diameter, 1.75\ Item Diameter, 0.25\ Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The hone brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is not possible with conventional honing stones.
  • Size: 1200 Max RPM, 1.5" Hole Diameter, 1.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

Honeycomb Aeronautical Bravo Throttle Quadrant Bundle with 4-Port USB 3.0 Hub (2 Items)

  • Bundle Includes: Honeycomb Aeronautical Bravo Throttle Quadrant 4-Port USB 3.0 Hub.
  • System: The Honeycomb Bravo Throttle Quadrant is an all-in-one cockpit system featuring a configurable throttle setup, from single-engine general aviation to four-engine commercial aircraft.
  • Multiple Cockpit: It features multiple cockpit components including autopilot, annunciator panel, gear, and flap lever as well as a trim wheel.
  • Design: The Honeycomb Bravo Throttle Quadrant is designed to ensure the most versatile flight simulation experience possible.
  • LED: It features gear lever with LED landing gear indicator lights.
Check Stock

General Tools 806 Jiffy Centering Punch, Silver

  • The Jiffy Centering Punch makes centering screw holes for hinges, locks, brackets and other countersunk hardware.
  • The tool's tapered end fits inside the hinge or bracket screw hole for automatic centering.
  • For quickly starting screw holes when attaching countersunk hardware such as hinges, hasps, hangers and drawer pulls.
  • Countersunk end ensures starting hole is centered in hardware screw hole.
  • Hardened steel pin for repeated punching and makes easily identifiable marks in wood surfaces.
  • Length: 2-1/2" (68mm). Body diameter: 3/8" (10mm).
Check Stock

Honeycomb Aeronautical Bravo Throttle Quadrant Bundle with Throttle Pack for Airbus A319-A380 (2 Items)

  • Bundle Includes: Honeycomb Aeronautical Bravo Throttle Quadrant, Honeycomb Aeronautical Throttle Pack for Airbus A319-A380.
  • All-In-One Cockpit System: The Honeycomb Bravo Throttle Quadrant is an all-in-one cockpit system featuring a configurable throttle setup, from single-engine general aviation to four-engine commercial aircraft.
  • Features: It features multiple cockpit components including autopilot, annunciator panel, gear, and flap lever as well as a trim wheel.
  • Versatile: The Honeycomb Bravo Throttle Quadrant is designed to ensure the most versatile flight simulation experience possible.
Check Stock

BU Products - Bamboo Honeycomb Coasters Set, Eco-Friendly Dinnerware, Natural Wood, Square Beer or Mug Mats (Hexagonal)

  • HONEYCOMB BRAVO THROTTLE QUADRANT is an all-in-one cockpit system featuring a configurable throttle setup, for single-engine general aviation to four-engine commercial aircraft..
  • FEATURES MULTIPLE COCKPIT COMPONENTS including autopilot, annunciator panel, gear and flap lever as well as a trim wheel.
  • THE MOST VERSATILE FLIGHT SIMULATION EXPERIENCE POSSIBLE. Customize your throttle, switches, and indicator lights to simulate multiple aircraft..
  • GEAR LEVER WITH RED/GREEN LED landing gear indicator lights.
  • ANNUNCIATOR PANEL with 7 two-way programmable switches and 14 warning lights.
Check Stock

AUTOTOOLHOME Self Centering Doweling Jig Plus 6 inch Widen Wood Dowel Jig Extended Step Drill Guide Bushings Set Woodworking Joints Tools

  • AUTOTOOLHOME self centering doweling jig Extended can be used to make accurate butt joints,miter joints and edge joints as well as acting as a mortising guide..
  • Self Centering Dowel Jig PLUS can be used for more wider material, on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling guide and wood board joints, it is an ideal tool for panel furniture..
  • Made from aircraft grade aluminum,more stable, corrosion resistance.Accurate positioning: fixture bolts provide very good threads, and provide bushes of different sizes to realize simple and convenient precise drilling,so that the positioning is more accurate, no offset or gaps are left.
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • There are 4 drill guide holes, along the top of the jig,2 holes accept 7/16" and 1/2" drill bits directly.the other 2 holes accept threaded replaceable steel bushings.Package induldes 1/4" drilling bushing x 2.
Check Stock

74 pcs handheld dowel jig kit 2 in 1 Center Scriber Line doweling hole jig with Wood Dowels Pins Drill Bits for Woodworking Drilling and Marking

  • 2 in1 multi-function: Self Centering Dowel Jig for Drilling holes and Center Scriber Systerm for Marking (pin the pencil to a diameter of about 6mm) . Material : ABS engineering plastics and high hardness metal..
  • Useful Woodworking dowel jig kits : Package contain 1 pcs self centering dowel jig , 3 pcs drilling guides, 3pc wood drill bits,3 size *20 pcs wooden dowels, and 3pc dowel centering pins (Size :6mm(1/4”),8mm(5/16”)10mm(3/8”) , 1 pcs small wrench woodworking tool accessory kits ..
  • Adjustable to fit 16mm-106 mm wooden board : Self center doweling jig is movable with screws to fit different thickness of wooden board . It is widely used for precise positioning when punching holes on the side of wood boards, with good verticality and higher punching accuracy..
  • Precise Measurement -This woodworking centering tool can quickly and accurately mark center lines on wood board, scribe to draw 1/16 inch, 3/16 inch, 5/16 inch, 7/16 inch, 1/8 inch, 1/ 4 inch, 3/8 inch, 1/2 inch edge.".
  • Easy and Quickly: Positioning ensure accurate alignment when drilling, can quickly and accur....
Check Stock

AUTOTOOLHOME Gold Self Centering Doweling Jig Kit 2 inch 6PC Drill Guide Bushings Set Adjustable Width Wood Dowel Jig Woodworking Joints Tools

  • AUTOTOOLHOME Gold Woodworking Self Centering dowel jig,more suitable for creating different wood joints.This self centering doweling jig can be used to make accurate butt joints ,miter joints and edge joints,as well as acting as a mortising guide..
  • It can be used on boards of different thicknesses(clamping wide capacity: 3/8" to 2"). Easy to install and use. Suitable for drilling guide and wood board joints, it is an ideal tool for panel furniture.make some shelves, cabinets, desks, tables, repairing doors ,installing railings..
  • The two pressing blocks are made of aircraft grade aluminum, surface is anodized for Gold color and does not easily leave scratches. Accurate positioning: fixture bolts provide very good threads, and provide bushes of different sizes to realize simple and convenient precise drilling,so that the positioning is more accurate, no offset or gaps are left.
  • The pressing blocks and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides ho....
Check Stock

Next Level Racing F-GT Elite Formula & GT Aluminum Profile Simulator Cockpit - Front & Side Mount NLR-E003

  • Next Level Racing Premium 5mm Carbon Steel Seat Brackets with 98 adjustment options and compatible with side mounting bucket seats.
  • Next Level Racing Flex Free Seat Slider system eliminating flex found in sim cockpit seat sliders.
  • Pedal plate design provides sliding adjustability....
  • Gear shifter and handbrake support plate and Buttkicker Gamer 2 adaptor.
  • Next Level Racing Foot Step making it more comfortable getting in and out of....
  • Next Level Racing Tool Kit Holder to have your tools for adjustment connected to the cockpit for when needed.
  • Ratchet tool for ease of assembly and....
  • Next Level Racing Custom Feet with height adjustable shock absorption feet.
Check Stock

Picture Hanging Tool - The Hanging and Leveling Tool so You get it Perfect The First time. (2-Size Bundle Pack) – Use Never Measure Picture Hanging Kit to Easily Hang Pictures, Collages, and Frames!

  • ...and mark where your fasteners will go allowing you to easily hang your picture perfect every time..
  • REPLACES YOUR AVERAGE MEASURING TOOL: Measuring tapes and other tools seem easy to use but can require complex math and move constantly, frustrating you and wasting your time in the process. NeverMeasure’s auto-centering feature allows you to find the center of any space without using any math. The locking screw allows you to lock the arms in place. When combining the intergrated levels, arms and numbers.
  • you can master the alignment of hanging any piece with ease..
  • 2 SIZE BUNDLE PACK: You will get a small NeverMeasure tool that extends to 18” and a large tool that extends to 36”..
  • 100% MADE IN THE USA: We pride ourselves on manufacturing the NeverMeasure Tool in the USA. We’re also proud to be a Veteran Owned company!.
Check Stock

Double Flaring Tool Kit 7 Dies with Tubing Bender (Flare Tool) and Pipe Cutter (1/8” to 1-1/8” Inch / 3-30mm) For Automotive Brake Line Copper Brass Aluminum

  • Complete kit: the flaring kit is all that is included, complete with dual flaring capabilities, allowing the mechanic to focus on the job rather than looking for parts..
  • Extensive torch adapter: double flaring toolset features 7 adapter sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" to help artisan complete the entire range of brake line flaring tool projects..
  • Precision and durability: this twin torch kit is made of the strongest steel material and chrome-plated for easy handling and precision..
  • Double flaring tool: this multi-purpose flaring tool has double flaring function, providing users with a wide range of applications and versatility..
  • Self-centering yoke: the brake line reamer tool consists of two rods covering seven diameters, with self-centering, slideable forged steel yoke to help form a professional and high quality yoke..
Check Stock

RC Servo Tester Centering Tool ESC Motor Checker Built in BEC 3CH High Precision for Airplanes Remote Control Models

  • The Mini ECS Motor Servo Centering Tool can easily detect the clearance, jitter and median of a kind of Servo ..
  • With Good stability and high accuracy,could connect the ESC and test the working status of the ESC or Motor easily..
  • It is able to connect three sets of servo or ESC at the same time, use SCM to control..
  • Power Supply:ESC built-in BEC or UBEC(4-5 pcs of #5 battery) to Provides power to the tester..
  • FPV Drone RC Servo Tester High Precision ECS Motor Servo Centering Tool for Remote Control Models RC Airplanes..
Check Stock