Top Cold Temperature Adhesion

Inland 1.75mm Blue PETG 3D Printer Filament Dimensional Accuracy +/- 0.03 mm - 1kg Spool 2.2 lbs

  • 1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
  • PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the....
  • Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more....
Check Stock

Double Sided Tape Heavy Duty 30pcs 1in x 1in Mounting Tape Pad Sticker Strong Adhesive Tape Waterproof Foam Tape for Indoor and Out Door

  • DOUBLE SIDED TAPE HEAVY DUTY: Name: 5608 car sticker tape. Color and material: Gray acrylic carrier. Width: 1 inch(25mm) width. Length: 1 inch(25mm). Thickness: 0.8mm(31.5mil). Long term temperature resistance: 93°C(200°F), short term temperature resistance: 149°C(300°F). 90 peel adhesion: 17 lb/in²(30 N/cm), normal tensile 75 lb/in, overlap shear strength: 90 lb/in(aluminum surface)..
  • HIGH QUALITY DOUBLE SIDED TAPE: This 2 sided tape is heavy duty strong adhesion.Thick foam tape has excellent shockproof and transformation resistance. High temperature resistance and waterproof tape.and durable. Powerful ability to bond a variety of surfaces..
  • MOUNTING TAPE RECOMMENDED: The mounting tape can be use for LED strip light. Logo bonding. EZpass mounting. Camera module assembly. Electronic component bonding. Module bonding to PET card. Touch panel bonding. Rubber feet bonding. Low surface energy bonding. Car sticker pad tape mounting. Kitchen and bathroom accessories bonding. Cell phone holder adhesive..
  • DOUBLE SIDED TAPE ADVANTAGE: This heavy duty double sided tape is fast and easy-to-use permanent bonding method provides high strength and long-term durability. Virtually invisible fastening keeps surfaces smooth. Can replace mechanical fasteners (rivets,....
Check Stock

RodMounts Sumo Suction Rod Carrier

  • SUMO can transport up to 6 rods of all types..
  • Staggering or offsetting the rods so the reels don’t interfere with each other provides more space..
  • Properly used, suction mounts provide vastly superior adhesion and can withstand much higher speeds, crosswinds and really rough “roads”..
  • If you are going to drive above 45 mph then you want the suction mounts..
  • Suction mounts are more sensitive to cold temperatures and wet and dirty surfaces. Really cold, wet and dirty surfaces can inhibit adhesion..
Check Stock

Silicone Oil Pan Heater Pad 4x5', Self-Adhesive Engine Block Heater Pad- 150W 120V, Transmission Fluid Reservoir and Hydraulic Fluid Heater Pad with Thermal Protector 68' Long Power Cord

  • [PREVENT ENGINE WEAR ON COLD WINTER STARTS]- When your car driving in a low temperature environment, it is difficult to start. Using the 120V /150W Silicone Heater Pad, Oil Pan Heater Pad can throw off a lot of heat and Warm up Quick to 194 degrees Fahrenheit (90 C) and easy to start by improving the flow of fluids in cold winter, which can limit cold startup motor bearing and ring wear ..
  • [PREMIUM MATERIAL]- 150W/120V Silicone Electric Heating Pads made of hard-wearing silicone, Car Battery Heater Pad has the functions of fast heat generation, good thermal efficiency, pressure resistance, abrasion resistance, and water resistance, which has a long useful life. You can rest assured to buy Heating Pad in this cold winter..
  • [GOOD ADHESION AND EASY TO INSTALL]- Installation is simple with the self -adhesive. Clean the surface of the oil pan thoroughly and keep the power cord away from any hot exhaust surfaces or moving parts. Tear off the 4 x 5”(10.2cm x 12.7cm) paper back of the Car Engine heating pad, stick the pad to a clean surface, Sticks amazingly well. and then plug the power cord into the socket..
  • [SAFETY WARMING]- There is an automatic thermal protector inside the Oil Pan Heater Pad, which keeps engine block heater pad’s temperature at a cer....
Check Stock

Silver Conductive Epoxy Adhesive, 1.0ML Electrically Conductive Adhesives for Repair Conduction Paint Connectors Board Paste Wire

  • Easy to use -- The pure silver powder medium of conductive silver paint has excellent electrical conductivity and moisture resistance and dryness..
  • Strong adhesion -- The silver glue has excellent adhesion and covering power on various materials such as PC, PET, PVC, PU and other films, resin plates, coated paper, glass, copper sheets, aluminum plates, etc..
  • Features -- The conductive adhesive silver glue has the feature of strong adaptability, stable conductivity, single component, low temperature curing, excellent adhesion and extremely low square resistance..
  • High‑purity silver -- This conductive silver paint is a high‑purity silver, low resistance, fast‑drying product, with controllable conductivity, low‑temperature curing and has a good electromagnetic wave shielding effect..
  • Application -- The conductive adhesive silver glue is widely used in home supplies, electrical items, CPU in computer, LED display, LCD display, optical fiber communication equipment, controller, heat sink and led etc..
Check Stock

FROGTAPE 240966 Delicate Surface Painting Tape, Yellow, 1.88 in. x 60 yd, 12 Rolls

  • Medium-high adhesion masking tape provides excellent adhesion to metal, rubber, plastic and fiberglass and is resistant to water, various solvents and gel coats.
  • FrogTape 250 Light Blue moderate temperature masking tape is highly conformable for rounding curves and contours. This tape delivers clean, flat edges for sharper paint lines..
  • This high-performance masking tape is made with a strong, smooth crepe paper backing that is tear-resistant, sliver-resistant, and easy to unwind.
  • Provides a residue-free removal and is temperature-resistant up to 250 F (for up to 30 minutes) and UV-resistant for up to 3 days.
  • Prep for Perfection with FrogTape performance grade moderate temperature masking tape. Does NOT contain Paintblock Technology..
Check Stock

Saffire Heavy Duty HVAC Professional Aluminum Foil Tape 3-inch x 150 feet - Hot and Cold Air Ducts, Insulation and More

  • ✅ CONTENTS: 1 aluminum foil tape with liner (3 inches wide by 150 feet - 50 yards).
  • ✅ HIGH-QUALITY MATERIALS: Aluminum foil tape is made of premium pressure-sensitive adhesive. Persistent adhesion is provided at low and high temperatures. (Long-term temperature resistance: 120℃, Short-term temperature resistance: 130℃) UV resistant, moisture resistant, heat resistant and show good performance in any type of weather..
  • ✅ MULTIPLE USES: Aluminum foil tape is suitable for smooth flat and irregular surfaces. It is generally used for sealing hot and cold air ducts (excellent HVAC duct tape), pipe insulation systems, sealing aluminum, stainless steel and plastic joints, temporary repair of metal surfaces, copper pipe fixing and more.
  • ✅ ENDURANCE: Aluminum foil tape performs consistently over a wide temperature range (-35° F to +260° F). A high tack acrylic adhesive creates an airtight, waterproof seal on application..
  • ✅ 100% MONEYBACK GUARANTEE: We offer 100% money back guarantee with no questions asked. This great product also comes with 10-year warranty for quality related issues. Purchase with confidence and enjoy our risk-free offer.
Check Stock

Inland 1.75mm White PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

  • 1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
  • PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
  • Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.
Check Stock

Inland 1.75mm Black PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

  • 1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
  • PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
  • Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.
Check Stock

PJCOLL Alcantara Magnetic Card Wallet Compatible for iPhone 13 Pro Max/13 Pro/13/13 Mini, for iPhone 12/12 Mini/12 Pro/12 Pro Max (Green)

  • [Luxury Material] Alcantara is a premium synthetic material made in Italy. For its many extraordinary properties, it is used on the steering wheels of high-end sports cars and interior linings of designer handbags. Alcantara is also the undiscovered perfect material for card holders. With our unique production technique, we wrapped both the exterior and interior of the holder with genuine Alcantara..
  • [Mag-Safe Compatible and Strong Adhesion] The card holder is Mag-Safe compatible. It offers tight adhesion to prevent the holder from detaching accidently, while allow you to remove it if desired..
  • [Heat and Water Resistant] Alcantara adapts to temperature change very slowly, which means it can maintain cool under the sun and remain warm in cold weather..
  • [Extremely Comfortable and Firm Grip] The suede-like touch makes Alcantara very comfortable to hold in hands. It is also non-slipping and offers a tight grip..
  • [Easy to Maintain and Anti-Scratches] No greasy fingerprints or stain will stick on Alcantara because of its non-porous structure. It is scratch resistant and shock-absorbent..
Check Stock

INSL-X PS800009A-01 Prime Lock Plus Alkyd Primer, 1 Gallon, White

  • Fast-drying, multi-purpose Alkyd-based coating that primes and seals a variety of substrates and hard to block stains with excellent adhesion.
  • High hiding Alkyd primer that seals stains from water, smoke damage, and more.
  • 300 - 350 square foot coverage per gallon.
  • Apply when temperature is above 45 °F (7.2 °C).
  • Do not paint if surface temperature is within 5 degrees of the dew point.
Check Stock

Inland 1.75mm Translucent Blue PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

  • 1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
  • PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
  • Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.
Check Stock