Top Cold drawn Low carbon

Baby Bodysuit I Love My Puerto Rican Mom Baby Rompers Baby Onesie

  • ✮ GENUINE HAND-DRAWN DESIGN Your baby will look great in this bright!.
  • ✮ COMFORTABLE FOR BABY Featuring tear-away tag, lap-shoulder neckline and 3 snap closures..
  • ✮ Your beautiful baby will be the center of attention everywhere you go!.
  • ✮ SOFT & DURABLE Machine wash cold. Tumble dry low..
Check Stock

Precision Brand 17SX2 Brass Shim Stock, 6″ x 60″ Roll, 260 Alloy Brass, 0.002″

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • Especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Precision Brand 17SJ3 Brass Shim Stock, 6″ x 180″ Roll, 260 Alloy Brass, 0.003″

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • Especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Pondmaster DNR02200 Extra-Capacity 12-by-24-Inch Mechanical Filter,Black

  • 12" x 24" Filter Box with Carrying Handle.
  • Complete with 1" I. D. Tubing and Fittings.
  • Filter box with locking handle for ponds up to 1000 gallons with light fish population.
  • Filter connects to inlet side of pump (not included) with 1-inch tubing and fittings (included).
  • Carbon and polyester filter media pads trap debris as it is drawn into filter.
  • Finer, carbon-impregnated material filters water further.
  • activated carbon helps eliminate unwanted colors and odors.
Check Stock

707 Pecos Street

  • Strong & balanced initial bite, hot or cold.
  • All Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron/Metal rotors..
Check Stock

Precision Brand 17SF12 12 Piece Brass Shim Stock Assorted 6″ x 12″ Sheets, Cold Rolled, 260 Alloy Brass

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • Especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Koyo B-168 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 1\ ID, 1-1/4\ OD, 1/2\ Width, 4300rpm Maximum Rotational Speed

  • Drawn cup needle roller bearing for applications with high dynamic loads.
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces.
  • Full complement of rollers for higher radial load capacity than caged rollers.
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads.
  • Meets standard ASTM F2162 for quality assurance.
Check Stock

Koyo BH-1012 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 5/8\ ID, 7/8\ OD, 3/4\ Width, 6200rpm Maximum Rotational Speed

  • Drawn cup needle roller bearing for applications with high dynamic loads.
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces.
  • Full complement of rollers for higher radial load capacity than caged rollers.
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads.
  • Meets standard ASTM F2162 for quality assurance.
Check Stock

Precision Brand 17SY25 Brass Shim Stock, 6″ x 25″ Flat Sheets, 260 Alloy Brass, 0.025″ (Pack of 2)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • Especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Precision Brand 17SY15 Brass Shim Stock, 6″ x 25″ Flat Sheets, 260 Alloy Brass, 0.015″ (Pack of 2)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • Especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

GrowlerWerks uKeg Go Carbonated Growler and Craft Beverage Dispenser for Beer, Soda, Cider, Kombucha and Cocktails, 64oz, Chili

  • STAYS FRESH – patented carbonation system automatically maintains freshness and optimal carbonation for weeks.
  • STAYS COLD – double wall stainless steel vacuum insulation keeps beverages cold all day.
  • STAYS CARBONATED – streamlined regulator cap allows you to choose high or low carbonation setting to match the beverage you’re serving.
  • CO2 CHARGERS NOT INCLUDED – uses 8 gram CO2 food grade chargers sold separately.
  • GO ANYWHERe – durable powder coated finish and rubber footing provide extra protection against dents and scratches.
  • SERVE WITH STYLE – 3-position dispenser tap provides easy pouring and storing with locked unlocked and pour positions.
  • SAVE MONEY – make your own flavored beverages at home.
Check Stock

Precision Brand 17SX3 Brass Shim Stock, 6″ x 60″ Roll, 260 Alloy Brass, 0.003″

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Especially useful for pilot production runs where material accuracy and economy are important.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock