Top Collet Chuck Tap Holder

2Pcs 1/2\ to 1/4\ Router Collet Reduction Sleeve Tool Bit - A3 Carbon Steel Black

  • For turning electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4"..
  • Easy to install: you only need to put the product in the chuck and fix it, then you can use it, no tools or extra steps are required..
  • Material: router bit collet chuck adapter is made of high carbon steel, durable and not easy to wear, suitable for long-term use, tougher and more wear-resistant..
  • Package included: 2pcs 1/2" to 1/4" router collet reducer collet reduction sleeve tool bits,it can replace broken parts when your old parts are damaged or lost..
Check Stock

EUROBOOR Weldon Tap Holder - 7/16' Inch Mag Drill Tap Collet with 3/4' Inch Shank & Weldon Shank - TCM.7/16ANSI

  • EASY ADAPTION - This tap collet is designed for easy for mag drills with 3/4" shank.
  • NO TOOLING NEEDED - This tap fits perfectly inside your machining tool.
  • FAST TAPPING - Increase the efficiency on the job with quick exchanges and interchangeability for faster tapping.
  • HEAVY DUTY MAKE - With heavy duty machined tap holder, you can rely on a long lasting tool on the job.
  • COMPACT DESIGN - Made for easy transport and storage, this tap holder is made in a compact design.
Check Stock

3M Mini Mandrel 935, 2-7/8 in x 1/4 in

  • Grips abrasive allowing you to reach tight internal diameters.
  • Versatile mandrel holds a 1inchwide strip of ScotchBrite nonwoven material, cut to the length needed for the application.
  • Shank of the mandrel is secured into the collet assembly or drill chuck of a rotary power tool.
  • Shank fits a 1/4 inch power tool collet or drill chuck.
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

3M Cartridge Roll Mandrel - Attaches Abrasive Cartridge Roll to Die Grinder - Power Tool Accessory - 1/8\ x 1\ x 1/4\ - 45119

  • Shank of the mandrel is secured into the collet assembly or drill chuck of a rotary power tool.
  • Mandrel enables access to tight spaces with a cartridge roll.
  • Comes in various pilot diameters and lengths to fit different cartridge rolls.
  • Shank must match the size of the power tool collet or drill chuck.
  • Pilot diameter must match size of cartridge roll.
Check Stock

US STOCK M3-M16 Drilling Tapping Machine Tap Collets 1100mm Electric Tapper Machine Threading Machine

  • Tapping angle: Universal.Rotation Speed: 0-312r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Standard Accessories Tapping Arm (One Set) Servo Motor And Reducer ( One Set).Tap Holder M3-M16 (One Set) Universal Joint(Tapping For a Vertical/Horizontal ) Optional Accessories：Magnetic Base 300KG (Tapping An Arbitrary Range) Moving Workbench (Mobile Tapping Machine ).
  • Applicable Materials: Aluminum, Copper, A3 steel, 45 steel, Cast Iron, Pig Iron, Q235, S136, mold steel, 718H, 40Cr, Stainless Steel and other metal materials.
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Main Parts(No console):Import Servo Motor+Enhanced Reducer + Touch Screen Control System+High-precision Cantilever Bracket+Import Tap Collet(Standard)+Universal Joint(Tapping for a Vertical/Horizontal).
Check Stock

Hilitand C32-ER32-100L Alloy Steel Collet Chuck Holder Straight Shank CNC Milling Extension Rod CNC Milling Tools

  • STRAIGHT SHANK: Straight shank type extended handle, the handle body was longer,the shank is 100mm long..
  • ALLOY STEEL: This ER32 collet holder is made of high quality chrome molybdenum alloy steel, this chuck holder is durable..
  • EXTEND THE DEPTH: Applicable to deep hole processing, resolve to extend the depth of processing needs..
  • CONVENIENT TIGHTEN: The nut can direct tighten, high rigidity and strong clamping force..
  • SMOOTH SURFACE: The surface is quite smooth without glitches which offers a comfortable feeling, safe for your hands..
Check Stock

Threading & Tapping attachment-lathe tailstock die holder set MT3

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
Check Stock

Starrett 162A Pin Vise Tool – Holds Drills, Wires, Jewelry, Taps Up to 0-0.040\ (1mm) with Tapered Collet, Knurled Rings, Nickel Handle

  • FINGER ROTATING DESIGN: The Starrett 162 Pin Vise features small handles that allow you to rapidly rotate between thumb and finger when filing small work.
  • HOLDS UP TO 1 MM: This model pin vise securely holds workpieces up to 0.040" (1mm) in diameter, including small stock, taps, drills, reamers, scribers, wire, small files, and other tools.
  • PREMIUM HOLDING DEVICE: Knurled rings and handle provide a secure grip, and the nickel plated handle and binding nut offer last-lasting durability and wear-resistance.
  • SMALLER BODY FOR FASTER WORK: The body diameter is narrower than the chuck to enable fast opening and closing of the chuck and faster rotation when working on small workpieces.
  • TAPERED COLLET: Its tapered collet provides maximum clamping surface Measurements are 1-11/16" handle length, 3/16" handle diameter, and 3-3/32" overall length with chuck closed.
Check Stock

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
Check Stock

Starrett 166C Pin Vise Tool – Holds Drills, Wires, Jewelry, Taps Up to 0.050 - 0.125\ (3.21mm) with Insulated Octagonal Handle for Shock Protection, Tapered Collet

  • NoN-ROLLING OCTAGON SHAPE: The Starrett 166C Pin Vise has an Octagon-shaped handle that prevents the tool from rolling when it’s set down..
  • HOLDS UP TO 3.2 MM: This model pin vise securely holds workpieces sized between 0.050" - 0.125" (1.3mm - 3.2mm), including small stock, taps, drills, reamers, scribers, wire, small files, and other tools..
  • SHOCK PROTECTION: This pin vise features an insulated PVC handle, which protects the user from electric shocks..
  • SMALLER BODY FOR FASTER WORK: The body diameter is narrower than the chuck to enable fast opening and closing of the chuck and faster rotation when working on small workpieces..
  • TAPERED COLLET: Its tapered collet provides maximum clamping surface. Measurements are 2-5/32" handle length and 3-55/64" overall length with chuck closed..
Check Stock

6 Packs 1/4\ To 1/8\ Collet Adapter for CNC Lathe Router Cutter Milling Bit Collet Reducer

  • Fitment: Fit any grinder that uses a 1/4" collet,for CNC machine tool chuck conversion,the conversion size is 1/4" to 1/8"..
  • Material: Be made of high performance Spring Steel,these adapter collets are extremely well made and firmly hold 1/8" bits in the router firmly and precisely..
  • Function: Reduce collet size and is a snug fit with the smaller bit.The best centering 1/4 x 1/8 inch reducing collet since it has 3 slits like a milling machine collet..
  • Tips: If you ever have any issues, simply contact us for a free replacement or refund. We support 24 hours online customer service..
Check Stock