Top Communication Interface Module

Fortin EVO-GMT5 Stand-Alone Add-On Remote Start Car Starter System For GMC Full Size Vehicles

  • The EVO-ALL is an ALL-IN-ONE data immobilizer bypass and door lock interface combo module.
  • It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
  • 2-way Data-Link port for serial communication with compatible remote car starters and also includes analog plug for compatibility with non 2-way....
  • Multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
  • For full functionality, installation manual, and to see if this module is compatible with your vehicle please go to Fortin's web site.
Check Stock

Honeywell LYNX Touch 5210 4.3\ All-in-One Wireless Home and Business Alarm Control System

  • ... set points Four door locks – Jammed locks reported to Honeywell Total Connect Remote Services 40 devices such as lights, switches and lamp modules 20 scenes 20 rules or event-based actions 20 schedules or time-based actions Sunrise/sunset lighting control Randomized lighting control.
  • Wi-Fi via L5100-WIFI Wi-Fi IP Communication Module for L5210 (SOLD SEPARATELY - NOT INCLUDED)    IEEE 802.11 B/G/N radio Supports alarm reporting Supports two-way voice LYNX Connect app supports up to four mobile iOS and Android devices.
  • Honeywell 3GL Communications GSM radio (SOLD SEPARATELY - NOT INCLUDED) – protocol supports AT&T and Rogers networks ADEMCO Contact ID Reporting (four or ten digit account numbers) SIA Format Reporting Internet central station communication with L5100-WIFI or ILP5 module GSM cellular central station communication with internal GSM radio Selection for primary communication path when using dual paths Touch activated radio registration GSM radio signal strength display Two-way voice communication over POTS, IP/Wi-Fi or GSM Honeywell Total Connect ready Alarm Output Built-in 85 dB sounder with voice siren Steady output for burglary/panic Temporal pulse output for fire and carbon monoxide alarms Long range radio/audio alarm verific....
Check Stock

GCAN-205 Modbus TCP to CAN Converter, Allows User to Connect Some ModTCP Master with an existing CAN Network

  • The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
  • CAN industrial automation control system.
  • The serial communication device is connected to CAN-bus.
Check Stock

SainSmart Genmtisu GRBL Controller Board for CNC Router Machine 3018-PROVer/ 3018-PROVer Mach3/ 3018-MX3

  • This controller board is compatible with Genmitsu CNC 3018-PROVer. If you have already had the Genmitsu CNC Router 3018-MX3/ 3018-PROVer Mach3, this controller board can help you turn Mach3 control to GRBL control..
  • Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1f..
  • USB interface communication, support 3-axis engraving, and laser module..
  • Input interface: X Y Z limit (HOME) interface, Z-axis tool return to zero, emergency stop switch interface, GRBL offline controller interface..
  • All control signals are isolated by optocoupler and have strong Anti-interference ability.
Check Stock

HiLetgo RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi

  • The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip..
  • Easy to use, low cost, and applicable to equipment development and card reader development etc..
  • Applicable for the user who need to design or manufacture the RF card terminal..
  • The module can be directly loaded into the various reader molds..
  • The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance..
Check Stock

HiLetgo 3pcs RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi

  • The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip..
  • Easy to use, low cost, and applicable to equipment development and card reader development etc..
  • Applicable for the user who need to design or manufacture the RF card terminal..
  • The module can be directly loaded into the various reader molds..
  • The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance..
Check Stock

Treedix 2pcs Level Shifting MicroSD Breakout Board with SPI Interface Onboard Level Conversion for Arduino UNO R3

  • The module has built-in level adjustment circuit, which can realize level conversion between 5V and 3.3V microSD.
  • Hardware connection: This microsd card is equipped with a level converter, which can not only connect 5v devices other than arduino, but also prevent the SD card from being damaged.
Check Stock

Genmitsu 3 Axis GRBL 1.1h 32-Bit CNC Controller Board for CNC Router Machine 3018-PROVer V2

  • This controller board is compatible with Genmitsu CNC 3018-PROVer V2 CNC Machine..
  • Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1h..
  • USB interface communication, support 3-axis engraving, and laser module..
  • Functional Input Interface: Includes X, Y, Z limit switches, Z-Axis tool setting touch probe, emergency stop switch, GRBL offline controller, MPG, 3 pin laser and air assistance pump..
  • All control signals are isolated by optocoupler and have strong Anti-interference ability. The outer ABS case could protect the control board well..
Check Stock

AOICRIE 2Pcs MCP2515 CAN Bus Module TJA1050 Receiver SPI Module for Arduino 51 MCU ARM Controller Development Board (2 PCS)

  • Support CAN V2.0B technical specification, communication rate 1Mb/S..
  • 0~8 bytes long data field, standard frame, extended frame and remote frame..
  • Module 5V DC power supply, SPI interface protocol control, 120 ohm terminating resistor, impedance matching, guaranteed drive capability, long-distance data transmission to prevent signal emissions..
  • Module size: 44mm x 28mm, centering distance of the positioning screw hole: 23mm x 38mm..
  • Operating current: typical value 5mA, standby current 1 microamperes, except for the power indicator. Working temperature: industrial grade -40 ° C to 85 ° C..
Check Stock

ACEIRMC 4pcs Heart Rate Sensor Module MAX30102 Pulse Detection Blood Oxygen Concentration Compatible for Arduino STM32

  • Integrates a red LED, a infrared LED, aphotodetector, an optical equipment and a low noise electronic circuit with environmental light suppression..
  • The standard I2C compatible communication interface can transmit the collected data to KL25Z and other microcontrollers for heart rate and blood oxygen calculation..
  • The chip can also turn off the module by software, and the standby current is close to zero, so that the power supply can always be maintained..
  • Apply to wearable device for heart rate and blood oxygen collection, worn on fingers, ear lobes, wrists and other places..
  • Package:4 * Heart Rate Sensor Module MAX30102 Puls Detection Blood Oxygen Concentration.
Check Stock

UMLIFE 3pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 3pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino Raspberry Pi

  • ❃❃ Package Included:3 x ACS712 Hall Effect Current Sensor Module + 3x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
  • ❃❃A wide range of applications:The current sensor ACS712 provides economical and accurate solutions for ac or dc sensing in industrial, commercial and communication systems. Typical applications include motor control, load detection and management, switching power supply and overcurrent fault protection..
  • ❃❃ACS712 Hall Effect Current Sensor Module:Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • ❃❃Voltage Sensor Module:Voltage input range: DC0-25V.
  • input : Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for AD pins..
  • ❃❃Perfect Combination:Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
Check Stock

AEDIKO 2pcs MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor IIC/SPI 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module

  • Power Supply: 3-5V (Internal Low Dropout Regulator).
  • Communication: Standard IIC Communication Protocol.
  • Built-In 16Bit AD Converter, 16-Bit Data Output.
  • 9-Axis Motion Tracking: 3-Axis Gyroscope, 3-Axis Accelerometer, 3-Axis Magnetometer and a Digital Motion Processor (DMP).
  • MPU9250 Module Includes Pull-Up Resistors On the SDA, SCL, and NCS Lines.
  • Pull-Down Resistors On the FSYNC and AD0 Lines.
  • MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor Using Immersion Gold PCB, Machine Welding Process to Ensure Quality.
Check Stock