Top Compatible With 3d Printers

FlashForge ABS Filament - Clear Color - 1.75 MM

  • Compatible Flashforge Printers: Creator Pro, Guider 2, Guider 2S.
  • Compatible with all FDM and FFF 3D printers that print with 1.75 mm diameter of filament.
Check Stock

FlashForge ABS Filament - Pink Color - 1.75 MM

  • Compatible Flashforge Printers: Creator Max, Creator Pro, Guider 2, Guider 2S.
  • Compatible with all FDM and FFF 3D printers that print with 1.75 mm diameter of filament.
Check Stock

HICTOP 100K ohm NTC 3950 Thermistors/Temp Sensor for Reprap Creality Ender 3 Ender 3 Pro CR-10 10S 3D Printer Pack of 5 1m/39.4inches

  • HICTOP 3d printer thermistor can be used on both of the heated bed and the extruder for 3d printers.
  • The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero etc.
  • There is a 2 pin female connector on the thermistor for 3D printer.
  • Wire length for the thermistor: 1m/39.4 inches.
  • Recommended parameters for the thermistor: R25℃=100K B25/50=3950K± 1%.
Check Stock

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

  • 【Upgrade Black Extruder】All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
  • 【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
  • 【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
  • 【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • 【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years,....
Check Stock

HICTOP 3D Printer Belt GT2 Belt 2mm Pitch 6mm Wide for Creality Ender 3 3 Pro Ender 5 CR-10 10S Anet A8 CNC and Other 3D Printers (5 Meter (16.5ft))

  • The HICTOP 3D printer belt is compatible for Creality Ender 3 ender 3 Pro Ender 5 CR-10 10S Anet A8 etc.3D Printers. There is no metal heads on it, you can use zip cable ties to lock it onto the printers.
Check Stock

Lullify Premium Cork Yoga Mat | Non Slip and Built To Last Through Hot Yoga Or Exercise Class | Biodegradable and Built With Sustainable Materials | Carrying Strap Included

  • 12 in 1 Bundle, Most Popular Bright Silk Color List: Silk White, Silk Black, Silk Red, Silk Sapphire Blue, Silk Peacock Blue, Silk Green, Silk Lime Green, Silk Yellow, Silk Orange, Silk Salmon Orange, Silk Pink, Silk Purple.
  • These colors are very Suitable to Print Beautiful 3d Printing Shiny Items.
  • Strong Compatibility: 1.75mm Diameter, Universal Compatible with Diverse FDM 3D Printers in Market, 1.75mm Diameter, Universal Compatible with Diverse FDM 3D Printers in Market,Melt well and Feed Smoothly, Silk-Like-Feel - Silky Shinny Surface with Silk Luster, Giving Smooth, Pearly and Unique Touch.
  • 100% Tangle-Free Tips: All of Our Filament are 100% Tangle-Free before Package Opened, Pls Insert Free End of Filament into Spool Holes to Avoid Being Tangled for Next Time Use.
  • Extra Gift: One Premium Quality Bottle of Solid Stick for Your 3D Printer Head Bed, Pack and Ship Together.
  • Package & Warranty: Contains 12 Spools, Each Spool Contains 1.1lbs Filament, Total 13.2lbs Filament in One Box. Within 24 hours Response,100% Satisfaction Guarantee.
Check Stock

Becker CAD 12 3D PRO - sophisticated 2D and 3D CAD software for professionals - for 3 PCs - 100% compatible with AutoCAD and Windows 11 10 8 and 7

  • 2D AND 3D modelling solution for professionals – the most comprehensive Becker CAD suite.
  • Import & export DXF and DWG files / export STL files for 3D printers – compatible with most other CAD solutions like AutoCAD and 3D connexion’s 3D....
  • Toolbox of the major 2D and 3D modelling functions like rounding corners of polygons and 3D surface selection.
  • Including virtual handbook, sample projects and example files to help you get started.
  • License for 3 computers – no expiry date, no subscription - compatible with Windows 11, 10, 8 and 7.
Check Stock

3D Printer,Snapmaker Upgraded 3-in-1 3D Printer with 3D Printing Laser Engraving CNC Carving(A350T)

  • 3-in-1 3D Printers&Larger Work Area: Snapmaker 2.0 3-in-1 3D Printer A350T integrates the functions of 3d printing/laser engraving/CNC carving to comes with your more creative needs and unlocks your full creative potential. A350T 3D Printers offers a larger work area of 320*350*330mm, which is capable of making much bigger prints or multiple smaller objects in one go..
  • Noise Reduction Chip&Smart Auto Leveling: With the new A350T Linear Modules, the noise gets reduced substantially, thanks to the TMC 2209 stepper motor driver chips embedded. Snapmaker 3D printers offers an induction sensor can probe the bed in a grid and apply mesh-based compensation that ensures you print on a level bed every time, all without complicated operations by yourself..
  • Filament Runout Recovery&Power Loss Recovery: A350T 3D printers can automatically detect power loss, and then resumes exactly where it left off. You can recover any project and get perfect results all the time, don't worry about power outages anymore. Equipped with a filament runout sensor, A350T Smart 3D printers will remind you when the filament has run out. You can now print large objects without fe....
Check Stock

JAYO TPU Filament, 1.75mm 3D Printer Filament, TPU 3D Printing 0.5KG Spool, Dimensional Accuracy +/- 0.02mm, Blue

  • 【Printing Effect& Settings】TPU 3D printing material has bright color and smooth surface and with the Nozzle Temperature : 200-220℃ and the bed: 70℃, making your printings more impressive and perfect. You really can find your favorite filaments in JAYO.
  • 【Wide Compatibility】JAYO TPU filament is compatible with most regular FDM 3D printers such as Sunlu S8, S8 PRO, T3, S9 PLUS and other 3D printers on the market. JAYO filaments can give you more convenience in the choice of 3D printers, even the whole printing process.
  • 【Professional after-sales service】For questions about product quality or 3D printing, you can contact us at any time. 24*7 days professional after-sales service team offer you worry free to purchase..
Check Stock

CorelCAD 2020 | Design and Drafting Software | Education Edition [Mac Download] [Old Version]

  • Perfect for creating 2D/3D architectural and, mechanical designs, electrical schematics, furniture designs, files for popular 3D printers, and any other 2D or 3D precision designs you can dream up..
  • Extensive 2D drafting tools (text, dimensions, 3D to 2D drawing generation tools, bill of materials, etc.).
  • Powerful 3D tools such as mesh, surface, and solid modeling, blending, chamfering, and shelling.
  • Compatible with over a dozen popular CAD and Graphics formats, to deliver files that can be opened and edited..
Check Stock

WINSINN 3D Printer Extruder Works with Creality Ender 3 V2 Upgrades Aluminum RepRap Prusa i3 for MK8 Drive - Silver

  • ✔️UPGRADE: Perfect replacement for Creality 3D Printers Ender 3, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus..
  • ✔️This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
  • ✔️For 1.75mm Filament. This Kit NOT include the instruction manual, we need to DIY.
Check Stock

Creality TPU 3D Printer Filament 1.75 mm - Black | 1Kg Spool (2.2 Lbs) | Dimensional Tolerance ±0.02 mm | Fit Most FDM Printers (1 Pc/Pack)

  • SPECIFICATION - Filament Diameter – 1.75mm | Weight – 1Kg Spool (2.2 Lbs) | Color – Black | Dimensional Tolerance +/- 0.02 mm | Shore Hardness: 95A | Speed: 20-60mm/ | Recommended Nozzle Temperature: 215-235 ℃ | Recommended heat bed settings: No heat/ 60-80℃.
  • MATERIAL - With outstanding bed adhesion, no heated bed requirements, minimal warping, and abrasion resistance much higher than any other standard printing material, the uses and possibilities that TPU uncovers have revolutionized 3D printing for people around the globe..
  • UNIQUE FEATURES - Creality TPU 3D Printer filament is Soft adhesive with high elastic, Chemical resistance and environmental resistance, Waterproof and moisture proof and Environmental protection. The printing model is resistant to wear and scratch, with good aging resistance..
  • FIT MOST FDM PRINTERS - Creality TPU 3D printer filament is compatible with all FDM printers of Creality 3D, and you can create your artwork with this filament of high quality in just a few simple steps..
  • CHEMICAL RESISTANCE - TPU 3D Printer filament have Excellent chemical resistance (water resistance, oil resistance, solvent resistance) and environmental resistance, environmental protection, and nontoxic..
Check Stock