Top Compatible With Most Lathes

3 x 6 SLEEVELESS SANDING DRUM By Peachtree Woodworking - PW122

Application External Grooving Parting off, fit for all CNC lathes and manual lathes, good at grooves, parting off..
Easy removal of grooving inserts with user..
Boring bar with high speed steel shank, strong shock resistance, thermal cracking and resistance to deformation.

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Round shanks allow use with a wide variety of toolholding systems.
Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
Designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses and machining....

✔️【WOOD BRAD POIINT DRILL SIZE】: 1/8" -5/32"-3/16"-1/4"-5/16"-3/8"-7/16"-1/2".
✔️【BRAD POINT TIP】: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use with oak, maple, cherry and other tough woods.
✔️【MATERIAL】: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
✔️【APPLICATION】: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required.
✔️【USED WITH】: Use in hand drills electric drills drill presses and lathes.

Material: The lathe milling hand wheel of the lathe is made of high-quality bakelite, with strong insulation and durability.
Easy to install: The hand wheel has a detachable rotating handle, and the hand wheel has screw holes for easy handle installation.
Application: Revolving handle hand wheels are widely used in industrial machine tools, such as milling machines, lathes, grinders, etc.
Features: New type, convenient movement of the milling handle hand wheel, strong carrying capacity.
Unique design: This plastic lathe hand wheel is a rear corrugated hand wheel design, which is convenient to replace one of the broken lathes.

✔️【WOOD BRAD POIINT DRILL SIZE】: 3/16" (Diameter) x 2"(Flute Length) x 3-11/32"(Overall Length).
✔️【BRAD POINT TIP】: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use with oak, maple, cherry and other tough woods.
✔️【MATERIAL】: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
✔️【APPLICATION】: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required.
✔️【USED WITH】: Use in hand drills electric drills drill presses and lathes.

Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes.
Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor.
Chuck body weighs 4 lbs and is 4" in diameter.
Includes #1 step jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal.
Includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal.
Includes screw chuck, allen wrench, and a set of tightening levers.
This "C-Series" chuck is compatible with all "C-Series" jaws and accessories.

Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing.
Base Dimension :50 x 55 mm * Sliding Table :90 x 50 mm * Vertical Travel 40 mm.
Tee- Slot width 9.5 mm Maximum *Jaw Opening : 70 mm * Adjustable Vice Jaws & Brass Gib.
Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness..
One base side of the Caste iron has 2 x Counter drills with suitable stud bolts to clamp the slide and the other has a continuous slot to fasten it through the lathe's toolpost stud. Check all pictures carefully.

Perfect for pens, bowls, cups, chess pieces, and other small workpieces.
Fits workpieces up to 12 inches long and 8 inches wide.
3.2-Amp motor provides over 50% more power than most 8-inch wood lathes.
Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM.
Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests.

✔️WOOD BRAD POIINT DRILL SIZE: 1/8" (Diameter) x 1-5/16"(Flute Length) x 2-23/64"(Overall Length).
✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use with oak, maple, cherry and other tough woods.
✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required.
✔️USED WITH: Use in hand drills electric drills drill presses and lathes.

✔️WOOD BRAD POIINT DRILL SIZE: 3/8" (Diameter) x 3-9/16"(Flute Length) x 5-1/4"(Overall Length).
✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use....
✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is....
✔️USED WITH: Use in hand drills electric drills drill presses and lathes.

√ Screw thread pitch cutting gauge tool set..
√ Size: Metric (mm) - 60° Whitworth - 55°.
√ Typically used to check the thread size determination is correct..
√ It is most useful for checking tool angle while cutting threads in metal turning lathes..
√ The angles on the thread cutting tool is checked on the V slots in the gauge..