Top Complete Module

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

  • The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
  • The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
  • ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
  • ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.
Check Stock

Fortin EVO-GMT5 Stand-Alone Add-On Remote Start Car Starter System For GMC Full Size Vehicles

  • The EVO-ALL is an ALL-IN-ONE data immobilizer bypass and door lock interface combo module.
  • It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
  • 2-way Data-Link port for serial communication with compatible remote car starters and also includes analog plug for compatibility with non 2-way....
  • Multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
  • For full functionality, installation manual, and to see if this module is compatible with your vehicle please go to Fortin's web site.
Check Stock

New BackFire Dual Universal Automotive Exhaust Flame Thrower Fire Throwing Kit Muffler

  • Kits include street-strip 4-pin module and coil combination.
  • Custom Flame-Thrower coil cover, adjustable vacuum advance canister, hi-performance advance kit.
  • Wire harness and capacitor, and complete installation hardware.
  • Race Only tune-up kits include matching coil and module, wiring harness, vacuum lock out, advance weights, springs, bushings, cap, rotor, dust shield, and necessary hardware.
Check Stock

Legrand - On-Q CPT306W-V1 in-Wall TV Power & Cable Management Kit, Hides Power & AV Cables for Clean, Clutter-Free Installation

  • FLEXIBILE INSTALLATION: Gives you the freedom and flexibility to install any TV, anywhere in your home.
  • HIDES CABLES: Neatly conceal power, HDMI, coax and Cat5e behind the wall for a clean, uniform and expandable home solution.
  • UNIVERSAL COMPATIBILITY: Works with all TV brands CUSTOMIZABLE POWER OUTPUT MODULE works with most TV plugs including, Right Angle, Straight Type and Wide Over-Mold Plugs, straight type and wide over mold plugs, perfect for unique entertainment center applications.
  • CUSTOMIZABLE POWER OUTPUT MODULE works with most TV plugs including, Right Angle, Straight Type and Wide Over-Mold Plugs, straight type and wide over mold plugs, perfect for unique entertainment center applications.
  • KIT INCLUDES: Power Output Module (includes 6 ft. pre-wired cord), Power Input Module, Drywall Bracket, 6ft Power Cord, and cut-out Template with complete instruction guide.
Check Stock

MPC Plug-N-Play Remote Starter for 2008-2017 Jeep Compass |Gas| |Key-to-Start| - Plugin T-Harness - Factory Fob Activated - Press Lock 3X to Start - Firmware Preloaded

  • ✅ WHAT YOU NEED TO KNOW - This is a complete remote starter kit for 2008-2017 Jeep Compass - Key-to-Start - Gas. This kit includes a remote starter and bypass module, which will temporarily bypass the vehicle immobilizer system during remote start and all parts required for installation. Compatible with automatic transmission vehicles only..
  • ✅ REMOTE START FEATURES - This is an Add-on remote start system for vehicles with existing keyless entry. Use your existing remotes to start the car by pressing the Lock button three times. No need to carry extra key fobs! When you are ready to drive, just put your key in the ignition and go! Smartphone module ready. Complete kit includes bypass module and all parts required for installation..
  • ✅ PLUG & PLAY INSTALLATION TYPE - This kit uses a plug-in T-Harness which dramatically reduces number of wiring connections that typical systems require. The installation of this product will require only the plug-ins and a ground connection. We provide concise instructions with plug locations for seamless installation. A person with basic knowledge of wiring car electronics should be able to install this product successfully..
  • ✅ AVAILABLE OPTIONS (at additional cost) - Smartphone Interface Module - U.S. ONLY. Evo Remo....
Check Stock

WATERWICH Ignition Coil Cdi Box kit Compatible with 50cc 70cc 90cc 110cc 125cc Dirt Bike Go Kart Scooter ATV Parts with Voltage Regulator Compatible with Coolster Baja Roketa Chinese

  • 【NOTE!】 - This item come with 5 PINS CDI module but not (4+2) PINS CDI module , Please confirm with the picture. DO NOT FIT: GY6 motorbikes and other 200cc - 250cc Zongshen Lifan ATV / QUAD with different CDI..
  • 【Fitment】 - Fits almost all years Chinese made electric start engine 49cc 50cc 70cc 80cc 90cc 100cc 110cc 125cc engines. For ATV, Coolster, Quad Bike, Dirt Bike, Pit Bike, Go Kart, 4 Wheelers, Scooter, Buggy, Taotao. Compatible with Coolster, Kazuma,Kawasaki KLX, Loncin, Lifan, Chongqing..
  • 【Installation Suggestions】 - No instructions, Please consult or hire a mechanic to install this wiring harness if you are not sure about the wirings. False assembly may cause fire on the harness, though this occasion happens rarely..
  • 【Package Include】 - Complete Wiring Kit - This is a complete electric start engine wiring harness,include Ignition Coil + 5 PINS CDI module + 4-pin Voltage Regulator Rectifier + Solenoid Relay + 3 electrode spark plug. Good value for money,easy for replacement..
  • 【Service】We are professional ATV and AUTO PARTs sellers. If you have any questions with product, please contact us before purchasing it, we'll reply you within 24 hours..
Check Stock

WATERWICH Cdi Box Ignition Switch Kit Compatible with 125CC 110cc 90cc 70cc 50cc Dirt Bike Go Kart Scooter ATV Parts with Voltage Regulator Compatible with Coolster Baja Roketa Chinese

  • 【NOTE!】 - This item come with 5 PINS CDI module but not (4+2) PINS CDI module , Please confirm with the picture. DO NOT FIT: GY6 motorbikes and other 200cc - 250cc Zongshen Lifan ATV / QUAD with different CDI..
  • 【Fitment】 - Fits almost all years Chinese made electric start engine 49cc 50cc 70cc 80cc 90cc 100cc 110cc 125cc engines. For ATV, Coolster, Quad Bike, Dirt Bike, Pit Bike, Go Kart, 4 Wheelers, Scooter, Buggy, Taotao. Compatible with Coolster, Kazuma,Kawasaki KLX, Loncin, Lifan, Chongqing..
  • 【Installation Suggestions】 - No instructions, Please consult or hire a mechanic to install this wiring harness if you are not sure about the wirings. False assembly may cause fire on the harness, though this occasion happens rarely..
  • 【Package Include】 - Complete Wiring Kit - This is a complete electric start engine wiring harness,include Ignition Coil + (4+2)PINS CDI module + 4-pin Voltage Regulator Rectifier + Solenoid Relay + 3 electrode spark plug. Good value for money,easy for replacement..
  • 【Service】We are professional ATV and AUTO PARTs sellers. If you have any questions with product, please contact us before purchasing it, we'll reply you within 24 hours..
Check Stock

Brite Strike Camp Perimeter Security System, Survival Signaling System, Complete Emergency System for Hunters, Campers, Hikers, Fishermen, BSTCAPSS

  • The camp alert perimeter security system and survival signaling system is a complete survival emergency system for hunters, campers, hikers, and fishermen..
  • works as a perimeter security system that will alert you if anyone or an animal wanders into your camp ground. The alarm module can be used as an audible emergency device to let passers-by know you need help..
  • alarm module has bright flashing blue leds that can be used as a signaling device at night. It also has a red led flashlight built in for map reading that will not destroy your night vision..
  • The CAPSS3 kit comes with two apals (all purpose adhesive light strips). the apals have a polished aluminum front that can be used as a small signaling mirror in the daytime..
  • repellant security camping security mountain lion bear alarm rescue signal signal bobcat system protector camp camping.
  • 135 db alarm module with built in red led flashlight and side blue leds for signaling. (Note: peel off backing with 3M adhesive for mounting).
  • Two blue led apals with polished aluminum surface for signaling day or night.
  • Two nylon zip ties for securing alarm module to a branch or stake.
Check Stock

CARMTEK Level Wizard - Wireless RV Leveling System | 2023 Camper Leveling System with Extensible Legs for an Accurate Leveling | Fast & Easy Way to Level Your RV

  • ...E OF RV - Recommended for use with both drivable and towable vehicles. Whether you have a travel trailer, fifth wheel, Class A, Class C, Class B, or Class B+, the Level Wizard system will work for your vehicle..
  • ✔ LIFETIME WARRANTY: If you experience any issue down the line you are guaranteed a free replacement or complete refund..
  • ✔ Note: Battery Operated: Requires 3 x AAA batteries for the Base Module and 3 x AAA batteries for the Remote Module. Batteries are NOT included..
Check Stock

SANUS in-Wall TV Power and Cable Management Kit

  • Easily Run power and cables behind the wall without the need for an electrician.
  • Works with any TV, compatible with all TV power plugs - even right angle cords.
  • Powers multiple devices- hook up digital TV adapter, cable box, sound bar or streaming devices such as Apple TV or Roku.
  • Easily run power and cables behind the wall and out of sight for a clean sleek entertainment space.
  • Kit includes power output module with 6ft prewired cord, power input module, drywall bracket, 6 ft power cord, cut out template with complete instructions.
Check Stock

Treedix UNO Project Basic Starter Kit Multi-Function Shield Compatible with Arduino IDE UNO R3 MEGA Nano Kit for Starter

  • This Basic stater kit is great for beginners who are interested in learning programming. It is easy to learn and brings a lot of fun to learners. You can also DIY more interesting projects by yourself..
  • There is a ATmega328P microcontroller and expansion board in the kit, we provide 80 components, don’t worry, you definitely have enough accessories to complete your project.
  • We focus on updating and adding more advanced modules, such as dot matrix module, button module, DHT11 module, DS1302, etc. All modules are soldered, so it is easy to wire..
  • We attach great importance to product quality control, and have always cared about thecustoms experience and improve the product function details.
  • This kit is a high-quality kit, which is perfectly compatible with Arduino.
Check Stock

Isolation Amplifiers Isolated Modulator (5 pieces)

  • ➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
  • ➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
  • ➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
  • ➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
  • ➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..
Check Stock