Top Composite Pipes

Loctite 1999131 All Purpose Repair Putty, 2 Ounces

  • The product is manufactured in united states.
  • Bonds metal, masonry, brick, wood, glass, ceramic, rubber, fiberglass composite, china, stone, marble and many rigid plastics.
  • Use to seal pipes, fix leaks in tanks and drains, repair appliances, tools, furniture, toys, automotive parts, pools and cracks in concrete.
  • When mixed, the combined putties react to produce a hard, tough, permanent and waterproof bond on a wide range of materials..
  • Loctite Repair Putty Multi-Purpose does not shrink and is resistant to most common solvents..
  • It can bond to damp surfaces and cure under water. It can also be sanded, drilled and painted..
  • It can be molded into different shapes so it will fit into any shape of crack..
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

ALDIOUS Electronic Water Descaler System for Whole House, Water Softener Scale Remover, Salt-Free Hard Water Conditioner, Limescale and Rust Removal, 3 Installation Methods, Works with All Pipes

  • ...: salt free water softener needs to be installed on the water inlet pipe for maximum effect..
  • 【APPLICABLE TO ALL PIPES】The size of 2 copper coils is 39.4''×0.4‘’. The whole house descaler works all pipes, including iron, copper, plastic, stainless steel, even PVC, composite pipe, PE-X, etc. and suitable for pipes of 0.5-2 inches in diameter. Operating voltage is 110-120V..
  • 【ADVANTAGES】Pulse bands works great in this new technology since it has a larger working area for all kinds of piping works. Keep the minerals which are great for our body. No salt, No chemical involves into your water, No PH changes too compare to the Water Softener. Super cheap and maintenance free..
Check Stock

ZHEDYI Three-Layer Composite Structure Garden Hose, 10m / 20m / 30m / 40m Household Hose, PVC Environmental Protection Frost and Weatherproof Water Hose, for Garden Watering, Lawn or Yard Maintenance

  • ☀ DURABLE AND LIGHTWEIGHT:Lightweight materials make it easy to handle and store. It is a good helper for lawn irrigation, garden watering, and roof cooling! Its features meet all your needs..
  • ☀ COLD AND FROST RESISTAN: It is not hard in winter. The cold and frost resistance is made of improved PVC material, which improves the anti-aging and anti-freezing performance of water pipes, and it is very soft in winter..
  • ☀ NOT EASY TO DISCOUNT: The thick wall thickness and good flexibility can keep the pipes from being discounted even if they are rolled together..
  • ☀ COMPOSITE STRUCTURE: PVC inner layer, environmentally friendly latex material, high temperature resistance. Fiber netting compressive layer. 500D fiber mesh design, fastened water pipe, high pressure anti-pull. PVC outer layer, cold-resistant, high-temperature resistant, anti-freezing and weathering..
  • ☀ SATISFACTORY SERVICE: We want to meet all your water needs! If you have any questions about the product, please feel free to contact us and we will replace the new hose for free or refund you to ensure this becomes your favorite risk-free purchase method.".
Check Stock

5 Piece NPT Thread Forming Taps Pipe Taps Set High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads Size 1/8 1/4 3/8 1/2 3/4 in Storage Box

  • Durable materials: Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel (GCR15) pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting..
  • Tool Storage Box: The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt.
  • Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set..
  • NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
  • Uncoated Tools for Versatile Use: Unco....
Check Stock

Happybuy RS15-6 Hot Water Recirculating Pump 110V Circulation Pump 3/4-Inch NPT 3-speed Recirculation Pump 9.5 Gpm for Water Heater System

  • ...s NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Rated power: 93/67/46 W. Max pressure: 145 psi (10 bar),the hot water circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft).
  • Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia.
  • 【CONVENIENT】 – Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water (the kitchen takes about 1 minute to get hot water due to low flow restriction).
  • 【HUMANIZED DESIGN】 -Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm..
  • 【ADVANTAGE】 – The hot water circulation pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas.
  • 【WIDE APPLICATION】 – Our hot water circu....
Check Stock

Air Cut off Tool,PNEUPACTURE 3 inch Cut off Tool,18000RPM,360-degree guard,Extended Handle Apply to Cutting Various Materials

  • [Efficiency: 18000rpm]: Professional pneumatic cutting tool, more efficient and faster to complete your work than general air cutting tools.(caution!....
  • [Wheel Cover]: The high-speed pneumatic cutting tool is equipped with a 180-degree wheel cover, which can be adjusted 360 degrees to prevent sparks....
  • [Safety Switch]: The 3in air cut off tool is also equipped with a safety switch to maximize safety and prevent accidental activation..
  • [Easy to use]: The air cut off tool is made of aluminum housing, which is light and durable, allowing you to precisely control the air knife. Fine....
  • [Function]: Air cut off tool is designed to cut metal plates, plastic pipes, composite materials,etc.Ideal for mechanics,construction work,and....
Check Stock

DURATECH Strap Wrench 18\ Handle, Adjustable Nylon Strap Pipe Wrench, Oil Filter Strap Opener Wrench

  • The handle length is 18 inches, the belt length is 32 inches, the width is 1.8 inches, and the whole product weighs 0.86kg..
  • Features a lightweight aluminum I-beam handle and a strong, woven polypropylene strap that grips tightly without scratching or damaging surface..
  • 2-ply double thick strap reduces stretching and tearing, he nylon belt wrench has a non-slip design on the head, and the nylon belt is made of high-quality, durable composite material for improved efficiency..
  • The strap wrench has a simple structure and is easy to assemble and use. Compared with ordinary pipe wrenches, strap wrench works in tight confined areas and are great for plastic or metal pipes, fittings, filters, jar openers, shafts, and irregular shapes..
  • Completely adjustable strap wrench. You will get a strap wrench heavy duty tool which is tough, High-quality anti-breaking nylon belt provides excellent grip..
Check Stock

Ebros Gift Steampunk Industrial Pressure Chamber with Painted Clockwork and Gearwork Decorative Wall Clock Figurine 11\ H Time Clocks Home Decor Victorian Science Fiction Sci Fi Halloween Prop

  • This Steampunk wall clock measures 11" tall, 8.5" wide and 3.5" deep approximately..
  • This Steampunk wall clock is made of designer composite resin, hand painted and polished individually. Color Tone May Vary.
  • Gears on the figurine are painted on and not functional. Clock operated by AA battery..
  • Immerse yourself in the magical world of steampunk sci fi. This particular wall clock is a beautiful work of art combining several steampunk elements of steam pipes, clockwork and gear work. This figurine is brought to life on a resin mold with 3D sculpting and hand painting..
Check Stock

Ebros Gift Steampunk Pressure Chamber with Painted Clockwork and Gearwork Decorative Wall Clock Figurine 11\ H Time Clocks Home Decor Accessory Victorian Science Fiction Sci Fi Halloween Time Prop

  • This Steampunk clock measures 11" tall, 8.5" wide and 3.5" deep approximately..
  • It is made of designer composite resin, hand painted and polished individually. Color Tone May Vary.
  • Gears on the figurine are painted on and not functional. Clock operated by AA battery..
  • Immerse yourself in the magical world of steampunk sci fi. This particular wall clock is a beautiful work of art combining several steampunk elements of steam pipes, clockwork and gear work. This figurine is brought to life on a resin mold with 3D sculpting and hand painting..
Check Stock

Bswox Bottle openers,Bottle Opener with Magnetic Cap Catcher - Pop Can Opener – Stick to Refrigerator for Easy Storage to Avoid Loss - Easy Picking-up

  • SIZE - 1/2" Steel Pipe, 30 Inches (76.2cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 1/2" fittings..
  • NOTE - These pipes are PAINTED BLACK, if protective painting at both ends makes pipes hard to screw into fittings, please remove the black painting. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 1/2" pipes. (O.D. of these pipes: 20.2mm.
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES - Please find more fittings and pipes from our store, we offer the most comprehensive range of fittings and pipes to meet ALL your needs. You can also find standard NPT 1/2.
Check Stock

GeilSpace 6 Pack 1/2\ × 16\ Pre-Cut Black Metal Pipe, Industrial Steel Fits Standard Half Inch Black Threaded Pipes and Fittings - Vintage DIY Industrial Shelving (1/2\ × 16\

  • SIZE - 1/2" Steel Pipe, 16 Inches (40.6cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 1/2" fittings..
  • NOTE - These pipes are PAINTED BLACK, if protective painting at both ends makes pipes hard to screw into fittings, please remove the black painting. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 1/2" pipes. (O.D. of these pipes: 20.2mm.
  • MATERIAL & PRODUCTS - GeilSpace Pipes are designed with a standard industrial finish.
  • materials and threads constructed from sturdy metal.
  • Unlike most other products on Amazon with grey looking and oily surface, surface of these product series is clean and PAINTED black, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES - Please find more fittings and pipes from our store, we o....
Check Stock