Top Compressed Air Regulator With Dryer

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Air Compressors with Regulator Pre-Filter

  • NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR/PRESSURE REGULATOR + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
  • STAGE 1: ADJUSTABLE 7 - 175 PSI PRESSURE REGULATOR + GAUGE / WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.
Check Stock

SUPER HEAVY DUTY HIGH FLOW AIR FILTRATION SYSTEM, 2 STAGE PARTICULATE FILTER PLUS OIL REMOVING COALESCING FILTER COMBINATION (1" NPT, AUTO DRAIN)

  • 1" NPT, HEAVY DUTY INDUSTRIAL GRADE AIR FILTRATION AND IN-LINE AIR DRYER COMBINATION WITH PRESSURE REGULATOR. WITH INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1..
  • 175 PSI MAX INPUT PRESSURE, EQUIPPED WITH 11oz METAL BOWLS, VISIBLE SIGHT GLASSES, PRESSURE GAUGE, WALL MOUNTING BRACKET AND 4 BAGS OF DESICCANT BEADS.
  • STAGE 1: PARTICULATE FILTER/WATER TRAP WITH PRESSURE REGULATOR. 5 MICRON ELEMENT REMOVES 95% OF MOISTURE AND DEBRIS, REGULATOR WILL ADJUST PRESSURE FROM 7 TO 175 PSI.
  • STAGE 2: COALESCING / OIL REMOVING FILTER, EQUIPPED WITH 0.01 MICRON ELEMENT WILL REMOVE 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST STAGE 1..
  • STAGE 3: IN-LINE DESICCANT AIR DRYER WILL DRY OUT THE OUTGOING COMPRESSED AIR LINES BEFORE REACHING YOUR PNEUMATIC TOOLS, BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE..
Check Stock

3 Stage Heavy Duty Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter 3/4 Npt Manual Drain

  • 3/4" Npt, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And....
  • 225 Psi Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your....
  • Stage 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed....
  • Stage 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil....
  • Stage 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5Oz Desiccant Beads In The Bowl. Beads....
Check Stock

Graco-Sharpe 6770 Dryaire 3 Stage Membrane Filter System

  • 3 stage filter, coalescer, and membrane dryer with pressure regulator.
  • Maintains -40°F dew point while achieving 0% compressed air humidity.
Check Stock

NANPU 3/4 NPT Industrial Grade 3 Stage Air Drying System - Particulate Filter Coalescing Filter Desiccant Dryer & Air Regulator Metal Bowl Auto Drain Suitable for Paint Spray＆ Plasma Cutter

  • 【High Pressure Resistance】Works Perfectly in the Pressure Environment of 30-175 psi.
  • 【High Degree of Safety】Excellent Metal Bowl w/ Visible Sight Glass in Every Stage Protect You and the System throughout the Entire Process..
  • 【Stage 1: Filter & Regulator】Compressed Air Water Trap Filter Equipped with 5 Micron Element, which has Excellent Filtering Performance, Much Longer Life and Reuse Feasibility, Remove Most of Moisture and Particles in the Air Line.
  • Pressure Regulator Accurately Adjust and Stabilize the Air Pressure..
  • 【Stage 2: Coalescing Filter】The Coalescing Filter is Equipped with a 0.01 Micron Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up..
  • 【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink..
  • 【Accessories】2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 3/4" NPT Fittings, 1 ....
Check Stock

NANPU 1/2 NPT Industrial Grade 3 Stage Air Drying System - Particulate Filter Coalescing Filter Desiccant Dryer & Air Regulator Metal Bowl Auto Drain Suitable for Paint Spray＆ Plasma Cutter

  • 【High Pressure Resistance】Works Perfectly in the Pressure Environment of 30-175 psi.
  • 【High Degree of Safety】Excellent Metal Bowl w/ Visible Sight Glass in Every Stage Protect You and the System throughout the Entire Process..
  • 【Stage 1: Filter & Regulator】Compressed Air Water Trap Filter Equipped with 5 Micron Element, which has Excellent Filtering Performance, Much Longer Life and Reuse Feasibility, Remove Most of Moisture and Particles in the Air Line.
  • Pressure Regulator Accurately Adjust and Stabilize the Air Pressure..
  • 【Stage 2: Coalescing Filter】The Coalescing Filter is Equipped with a 0.01 Micron Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up..
  • 【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink..
  • 【Accessories】2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 1/2" NPT Fitings, 1 x....
Check Stock

INDUSTRIAL RATED Three Stage Air Drying System - Air Particulate Filter, 0.01 Micron Coalescing Filter & Air Pressure Regulator Modular Combo 3/4" NPT - Auto Drain, Metal Bowl

  • New 3 Stage air drying system. (Particulate Filter, Coalescing Filter, Pressure Regulator) Does NOT include Desiccant air dryer (3/4″ NPT Measures 1.05″ outside thread diameter in linear inches).
  • STAGE 1: Particulate Filter / Water Trap with Auto Drain. Max input pressure 175PSI.
  • STAGE 2: Coalescing Filter removes 99.98% of remaining moisture vapor, oil and oil vapor from compressed air lines.
  • STAGE 3: PRESSURE REGULATOR, REGULATES PRESSURE BETWEEN 7 – 225 PSI.
  • 48CFM @ 90PSI, 175PSI Max Input Pressure, 150PSI Max Output. Replacement Filter Stage 1 ASIN, B01MUDUXU6 .. Replacement Filter Stage 2 ASIN, B01NCZ7452.
Check Stock

3/4 Compressed Air Moisture Filter Regulator Oiler Separator Lubricator Combo

  • 3/4" Compressed Air Moisture Filter Regulator Oiler Separator Lubricator Combo.
  • Brand new in line compressed air moisture filter, regulator, lubricator combo. This is a high quality unit that gives you the power to keep moisture out of your air lines, regulate air pressure, and lubricate your air lines all at once!.
  • This has 3/4" female NPT input as well as a 3/4" female NPT output port. This assembly has a 140 CFM max flow rate and comes equipped with a pressure gauge..
  • You can adjust the regulated pressure between 7 - 160 PSI with a 225PSI max PSI. The moisture filter features a 5 micron filter, 2.7 oz bowl capacity, as well as a visual sight glass to easily monitor the moisture level..
Check Stock

1/2 COMPRESSED AIR PARTICULATE FILTER WATER TRAP/PRESSURE REGULATOR/DESICCANT AIR DRYER/COALESCING FILTER FOR COMPRESSED AIR SYSTEMS GREAT FOR PLASMA CUTTER

  • New 1/2" Particulate Filter & Pressure Regulator / Water Trap.
  • Compressed Air Line Coalescing Filter and desiccant dryer combo.
  • 1/2" FEMALE NPT INLET X 1/2" FEMALE NPT OUTLET.
  • THREE Stage unit has added water seperator pre filter to remove larger debris and moisture.
Check Stock

3/8" COMPRESSED AIR PARTICULATE FILTER WATER TRAP / PRESSURE REGULATOR / DESICCANT AIR DRYER / COALESCING FILTER FOR COMPRESSED AIR SYSTEMS GREAT FOR PLASMA CUTTER

  • New 3/8″ Particulate Filter & Pressure Regulator / Water Trap.
  • Compressed Air Line Coalescing Filter and desiccant dryer combo.
  • 3/8″ FEMALE NPT INLET X 3/8″ FEMALE NPT OUTLET.
  • THREE Stage unit has added water seperator pre filter to remove larger debris and moisture.
Check Stock

3/4 Compressed Air In Line Filter Desiccant Dryer Moisture Water Separator New

  • Brand new 3/4" NPT compressed air moisture filter desiccant dryer unit. Also included is two refills of desiccant beads..
  • his filter / desiccant dryer removes water, oil and humidity from compressed air. The desiccant bead dryer will remove water and humidity in the compressed air..
  • These desiccant beads change color from blue to a light pink when they are saturated and need to be changed. This has a heavy duty aluminum quick release bowl for easy maintenance that provides easy viewing for contents as well as impact protection..
  • More replacement desiccant beads are available in our (Regulators, Filters & Oilers) ebay store category..
  • Great for painting, plasma cutters, sandblasting and more!.
Check Stock

Forney Easy Weld 251 20 P Plasma Cutter,Green, 20 Amp

  • CUTS- Mild steel, aluminum and stainless steel from thin material to 1/4"* (6.35 millimeters) with ease! *(Mild Steel).
  • EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze.
  • DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts.
  • LIGHT AND PORTABLE- Forney's 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible.
  • RUGGED- All metal case. Built to take the day to day.
  • MACHINE INCLUDES- Includes a 13' cutting torch, 8' ground clamp, 20A-15A adapter, 1 additional electrode and 1 additional nozzle. Backed by a 12-month warranty.
  • PRODUCT SPECIFICATIONS- Dimensions: 15.125" (384.18 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters) Weight: 21.5 lbs. (9.75 kilograms) Air compressor capable of 1.5 CFM is required (not included).
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock