Top Compression Clamps

Garage Door Cable Replacement Kit - Two 3/32 inch x 14 foot Long and Two 1/8 inch x 13 foot long Galvanized Aircraft Cables. Complete with 4 Cables and 10 Fasteners to Fix Your Overhead Sectional Door

  • ????GDS CO is the Only AUTHORIZED SELLER for BOSTON ENTERPRISES galvanized cables and wire ropes pack..
  • ????TWO EXTRA LONG CABLES, 1/8 x 168 inches 7×19 Strand, 3/32 x 156 inches 7×7 Strand, FUSION CUT ENDS.
  • ????2 Cable Adjusting Clips, 2 S-Hooks, 2 Cable Clamps, 2 Compression Sleeves and 2 Compression Stops.
  • ????DESIGNED TO WORK on a multitude of doors with torsion springs or extension spring setup..
  • ????For Torsion Spring Doors up to 12 Feet Tall & Extension Spring Door to 9 Feet Tall. 100% GUARANTEED!.
Check Stock

Dynamic FLK-38 Automotive Replacement Fuel Line Repair Kit 3/8 in (10mm), 23 Pack , Black

  • Save Time and Money with the Dynamic FLK-38 3/8" Nylon or Steel Fuel Line Repair Kit.
  • QTY 2, 3/8" NYLON TO STEEL COMPRESSION UNIOn.
  • QTY 2, 3/8" QUICK DISCONNECT TO STEEL TO NYLON.
Check Stock

HOME MASTER HARDWARE Cable and Pulley Replacement Kit - 4pcs 3' Heavy Duty Pulleys,2pcs Galvanized Aircraft Cables - 3/32 Diameter 12 Fasteners for Overhead Sectional Garage Doors

  • Cable and pulley replacement kit are made of steel,zinc plated finish,aluminum compression sleeves, durable, sturdiness and long-lasting use..
  • Heavy duty pulleys with 9-ball bearing for quieter and smoother movement for front or rear,the 2.6mm x 158 in cables with 7 x 7 strand has a rating of 1200 lbs ..
  • Cable pulley replacement kit for torsion spring doors and extension spring door .It's perfect for do it yourself garage door repair and maintenance..
  • Package include 4 Pcs heavy duty 3 in pulleys,2 Pcs 2.6mm x 158 in extension spring safety cables,2 Pcs 2-1/2" S hooks ,8 Pcs compression sleeves ,2 Pcs cable clamps ..
  • Home Master Hardware Lifetime Warranty - If anything ever goes wrong with your cable and pulley replacement kit, please contact us,we will replace them with new ones or full refund ,and provide best service .(lifetime tech support, 18 month replacement).
Check Stock

Oetiker Stepless OET070170-300PCK Clamp Assortment Case, Single Ear Hose Clamps Without Pincers, 1/4" - 11/16"

  • Genuine Oetiker Clamps - 50 each of 1/4" (7.0 mm), 13/32" (10.5 mm), 7/16" (11.3 mm), 1/2" (13.3 mm), 5/8"(15.7 mm) and 11/16" (17.0 mm).
  • 360° Stepless Design - no steps or gaps on inner circumference.
  • Narrow band, concentrated seal compression.
  • Specially formed strip edges reduce the risk of damage to the part being clamped.
  • Lightweight design and Tampering is visible.
Check Stock

18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These....
Check Stock

20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 5/16’’ (8mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #10 hose clamps have adjustable clamping range of 1/2" to 1-1/16"(12mm-27mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can....
Check Stock

Winlong Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing 1/4 Hose Clamps 1/2 Hose Clamps

  • Premium Materials: Winlong hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. Winlong stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • Winlong hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: Winlong size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: Winlong hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. Winlong worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 16 Clamping Range 3/4 Inch to 1-1/2 Inch (19mm-38mm) for Automotive Plumbing, 3/4'', 1'', 1 1/4'' Hose Clamps

  • Premium Materials: WINL SAE 16 hose clamps of 19mm-38mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size #16 hose clamps have clamping range from 3/4 inch to 1-1/2 inch (from 19mm to 38mm), great for hose or pipes within this range, perfect as 3/4 inch hose clamps,7/8 inch hose clamps,1 inch hose clamps,1 1/5 inch hose clamps, 1 1/4 inch hose clamps etc. . The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 16 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without ....
Check Stock

Diesel Fuel Injector Return Line Kit Replacement For 1989-1994 Ford Non-Powerstroke 7.3L

  • 【HIGH QUALITY】Long life-span matters, that is why our injector repair kit are made from braided material to protect the rubber hose to ensure it....
  • 【PREMIUM QUALITY】Fuel Injector Return Line kit is made of strong and tough quality materials, which enhance the durability and superior....
  • 【FITMENT】Diesel injector installation kit replacement for ford 1989-1994 7.3L non-powerstroke. NOTE: THE SIZE OF THESE FUEL LINES IS 1/4.
  • 【PACKAGES】Package included: 1X braided fuel line, 18X spring clamps, 16X o-rings, 8X compression copper washers, 4X straight tees, 4X elbow tees....
Check Stock

WINL Stainless Steel Hose Clamps - 22 Pack Worm Gear Drive Hose Clamps Micro Size 6 Clamping Range from 5/16 Inch to 7/8 Inch 8mm-22mm for Automotive Plumbing 1/2 Hose Clamps 3/4 Hose Clamps

  • Premium Materials: WINL size 6 hose clamps of 8mm-22mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The micro size #6 hose clamps have clamping range from 5/16 inch to 7/8 inch (from 8mm to 22mm), great for hose or pipes within this range, perfect as 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps, 5/8 inch hose clamps, 3/4 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: WINL size 6 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burr....
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 10 Clamping Range of 1/2'' to 1-1/16'' (13mm-26mm) for Automotive Plumbing, ,1/2 Inch, 3/4 Inch,1 Inch Hose Clamps

  • Premium Materials: WINL size 10 hose clamps of 13mm-26mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size#10 hose clamps have clamping range from 1/2 inch to 1-1/16 inch (from 13mm to 26mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc.. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 10 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock

S erounder Hold Down Clamp, Metal Quick Acting Hold Down Clamp Set for T-Slot T-Track Woodworking Tool(T Screw and Plastic Knob Nut Just)

  • ✔Scope of Applications：The T-slot clamp is ideal for fixing, positioning and fixing workpieces in many woodworking or metalworking applications, including planers, drilling machines, CNC, table saws, fixtures, panels, vertical milling machines, etc.
  • ✔Easy to Install：The hold-down clamp is easy to install, and the flush pressure is applied to any position along the flush-mounted t-slot t-shaped track. Slide into the t-shaped track and fasten it by turning the knob nut.
  • ✔Multifunctional Usage：This is a set of compression fixtures for t-slot rails. These t-track hold-down clamps can be used in many woodworking and metalworking applications for workpiece fixation, positioning and fixing.
  • ✔Premium Materials：Our t-track hold-down clamp is made of high-quality metal materials, sturdy and durable, and has a long service life. Exquisite craftsmanship and exquisite operation ensure its super durability.
  • ✔What You Get：You will receive 1 x whole clamps set (threaded rod, t screw, knob nut, slide block, washer, clamp board) or 1 x t screw and plastic knob nut just.For a better customer experience, we will optimize the product from time to time.
Check Stock