Top Compression Fitting Plugs

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

OTC 5605 Deluxe Compression Tester Kit with Carrying Case for Gasoline Engines

  • OTC's Deluxe Compression Tester Kit offers a complete package for compression testing on gasoline engines and comes complete with standard and specialty adapters.
  • Kit includes the deep well connector used on recessed plug well style heads and the new Ford Triton engine adapter using 16 mm thread plugs.
  • Adapters work on both flat and tapered seat plugs.
  • corrosion resistant nickel plated finish protects metal components.
  • Extra long 25 inch flex hose gauge assembly with quick coupler allows easy viewing out of cluttered engine compartments.
  • Rugged blow molded hard case with removable lid.
Check Stock

UltraPure 3403410 1/4\ MPT x 3/8\ Tube Ozonator Compression Fitting

  • Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube.
Check Stock

2pcs Compression Tube Fitting Adapter, Stainless Steel Straight Adapter, Double Ferrule Joint Connector, for Connecting Pipes Fittings(Ф6-Ф14)

  • 【Reasonable Design】The quick-screw design of the sleeve has good air tightness and is not easy to leaking..
  • 【High-quality Materials】The tube fitting adapter is made of 304 stainless steel, which is resistant to rust and corrosion..
  • 【Good Fixability】The design of the middle card board of the compression tube fitting adapter can be fixed without shaking..
  • 【The Scope of Application】The tube fitting double ferrule joint connector is an adapter used to connect different types of pipes or fittings..
  • 【Easy to Install and Disassemble】The stainless steel compression tube fitting adapter can be quickly installed and removed, making it more convenient to use..
Check Stock

Cole-Parmer-3121270 Compression Ferrule and Nut Assembly, for 1/4\ OD, Brass

  • This Joywayus compression fitting is made of brass..
  • Connects to 4mm copper,brass,aluminum,or plastic tubing..
  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
Check Stock

Audio Speaker Cable Connector,20 Pcs 4mm Audio Speaker Wire Cable Screw Banana Plug Connector Black&Red

  • Banana plug diameter: 4 mm.Screw connector fitting, no soldering needed Standard size fits most speakers.
  • The plugs can be stacked with existing 4mm banana plugs..
  • The banana plugs will connect from 2mm up to 5mm diameter speaker wire.
  • Great tools for using in the audio equipment, industrial instrument,power test and automobile test..
Check Stock

MILL MAX 310-43-120-41-001000 SIP SOCKET, 20POS, THROUGH HOLE (50 pieces)

  • WALL PLUGS FOR SCREWS: Talon's range of wall plugs is suitable for domestic and trade customers, featuring the essential DIY tools for your tool bag for easy fittings without causing damage. Talon's Wall Plugs, available in three distinct colours and sizes, are a must for your tool chest - they are designed to enable smooth fitting screws in new home improvement and trade work..
  • STRONG PLASTIC WALL PLUGS: Manufactured using strong and secure polypropylene - a virgin grade polymer - Talon's Wall Plugs are designed to last. Screws alone are unlikely to stay in place when used in plasterboard, but are shown to be much strong and longer lasting when coupled with quality wall plugs. Keeping wall plugs to hand during your DIY jobs is sure to keep it simple and easy!.
  • ESSENTIAL DIY FITTINGS: Talon's Wall Plugs feature protruding fins to restrict rotation when inserted into drilled holes, which provides security to your fittings. Perfect to keep in tools sets and electricians tools kit, for when those multi jobs arise, our Wall Plugs are designed to expand two ways in order to reduce pull-out and ultimate damage to your walls. Includes 5x 20 wall plug strips..
  • EXPLORE THE FULL RANGE: The Talon Wall Plugs are also available in a range of different sizes for diff....
Check Stock

Joywayus 3/8\ Tube OD Brass Ferrule Fittings Compression Sleeves Brass Compression Fitting(Pack of 50)

  • Size:3/8" Tube OD. Package included: 50pcs Compression Ferrule Sleeve. It is packed in plastic box to avoid product damage..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

  • ✅[QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube ....
Check Stock

Compatible with Compression Sleeve Puller（03943）-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.T....
Check Stock

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

  • ✅ [QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon t....
Check Stock

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

  • ✅[QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube ....
Check Stock