Top Compression Pipes And Fittings

Spears 817 Series PVC Pipe Fitting, 45 Degree Elbow, Schedule 80, 2' Socket

  • 45-degree elbow for connecting two pipes or fittings at an angle.
  • Socket ends for connecting to male pipes or fittings.
  • PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.
  • Maximum operating temperature of 140 degrees F.
  • Meets ASTM D1784 and D2467 standards for quality assurance, and certified by NSF International for potable water service.
Check Stock

Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 3/8 x 3/8 Tube OD,50065-06

  • 90-degree elbow for connecting two tubes at an angle.
  • Female compression tube fitting for connecting to male threaded pipes.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to 250 degrees F.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

NIBCO - K05540C C4807 2 HXH 90 ELBOW PVC, White, 2' (C48072)

  • 90-degree elbow for connecting two pipes or fittings at an angle.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

2pcs Compression Tube Fitting Adapter, Stainless Steel Straight Adapter, Double Ferrule Joint Connector, for Connecting Pipes Fittings(Ф6-Ф14)

  • 【Reasonable Design】The quick-screw design of the sleeve has good air tightness and is not easy to leaking..
  • 【High-quality Materials】The tube fitting adapter is made of 304 stainless steel, which is resistant to rust and corrosion..
  • 【Good Fixability】The design of the middle card board of the compression tube fitting adapter can be fixed without shaking..
  • 【The Scope of Application】The tube fitting double ferrule joint connector is an adapter used to connect different types of pipes or fittings..
  • 【Easy to Install and Disassemble】The stainless steel compression tube fitting adapter can be quickly installed and removed, making it more convenient to use..
Check Stock

Pipe Décor Desk Outside Leg Set, Authentic Industrial Pipe, Unfinished Dark Grey Black Steel for Rustic Look, Classic H Design, 28.75-in H x 21.5-in W, 3/4-in Diameter, 2-Pk

  • ...5-in diameter, assembled leg specs 28.25-in tall and 21.25-in wide.
  • Includes 2 “H” table legs comprised of (4) 3/4-in x 8-inch pipes, (4) 3/4-in x 18-in pipes, (2) 3/4 -in x 16-in pipes, (8) 3/4-in round flanges, (4) 3/4-in tees, (16) screws, instructions, and a clean and seal sheet.
  • pipes and fittings are industrial grade malleable iron and come in a standard steel grey color, commonly known as black within the plumbing industry.
  • PIPE DECOR genuine industrial pipes and fittings will stand the test of time.
  • You will know Pipe Décor parts and accessories when you hold them, beauty and beast, strength and style.
  • easily customize your PIPE DECOR projects with our many sizes of pipes and fittings.
  • PIPE DECOR pipe and fittings are coated with a light industrial grease to prevent rusting.
  • we highly recommend that you clean and seal each piece, before assembly, to ensure that they stay rust-free.
  • sealing the pipe with polyurethane spray will protect it from rust and scratches.
Check Stock

Pipe Décor Desk Inside Support Leg, Authentic Industrial Pipe, Unfinished Dark Grey Black Steel for Rustic Look, for Classic H Design Desks or Tables, 28.75-in H x 11.75-in, 1-in Diameter, 1-Pk

  • ...cs 3.5-in diameter, assembled leg specs 28.75 inches tall and 11.75-in wide.
  • Includes 1 “H” support table leg comprised of (2) 1-in x 8-in pipes, (2)1-in x 18-in pipes, (1) 1-in x 6-in pipes, (4) 1-in round flanges, (2) 1-in tees, (8) screws, instructions, and a clean and seal sheet.
  • pipes and fittings are industrial grade black steel and malleable cast iron.
  • standard steel grey color, commonly known as black within the plumbing industry.
  • PIPE DECOR genuine industrial pipes and fittings will stand the test of time.
  • You will know Pipe Décor parts and accessories when you hold them, beauty and beast, strength and style.
  • easily customize your PIPE DECOR projects with our many sizes of pipes and fittings.
  • PIPE DECOR pipe and fittings are coated with a light industrial grease to prevent rusting.
  • we highly recommend that you clean and seal each piece, before assembly, to ensure that they stay rust-free.
  • sealing the pipe with polyurethane spray will protect it from rust and scratches.
Check Stock

Legines Brass Pipe Fitting Hex Bushing 3/8 NPT Male to 1/4 NPT Female 1200psi 2pcs

  • Hex bushing for connecting two pipes with different diameters.
  • 3/8" Male NPT threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250....
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

  • Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
  • Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
  • Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
  • Contains (5) 3/16″ OD Compression Brake Line Fittings.
  • Contains (5) 1/4″ OD Compression Brake Line Fittings.
Check Stock

1/2\ Floor Flange, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project /Furniture/ Shelving Decoration (10 Pack)

  • 3/4 INCH PIPE ELBOW – TEN PACK: Our Brooklyn Pipe cast iron fittings 10 pack elbow pipes are made with from superior steel with 100% durability and strength and provides you with great flange elbow fittings at a very affordable price..
  • PERFECT FOR DIY: Whether you’re looking to build a pipe shelf, pipe towel rack, pipe lamp, our malleable 90 degree elbow industrial fitting is up to the task. These fittings are for decor and DIY projects only, they are not rated to carry gas or water..
  • RAW IRON: Our 3/4 inch black malleable iron pipe fittings are raw and unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron, it’s normal for your hands to get dirty. You’ve probably seen iron workers in movies, they don’t come home clean!.
  • ONE CONVENIENT PACK: Our 3/4 90 degree elbow threaded flanges fittings pipes give you 100% super convenient benefits than other bands because our Brooklyn Pipe elbow is designed to be compatible with your all project parts.
  • UNLEASH YOUR CREATIVITY: We inspect and pack each pipe fitting and we offer a LIFETIME warranty on our products, just give us a call or send an e-mail. Now, with our black pipes bring the rustic, industrial style into your home, office or any inte....
Check Stock

10-2 Plastic Triglides Slides

  • Coupling for connecting two pipes with the same diameter in a straight run.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Fleetwood Mac Greatest Hits

  • Effectively removes oil, grease, and dirt from the surfaces of all sizes, classes, and schedules of PVC, CPVC, ABS, and styrene.
  • Designed for use before the application of Weld-On pipe primers and solvent cements.
  • Ensure the strongest bond possible between pipes and fittings by preparing your surfaces.
  • Low-VOC content minimizes environmental impact and helps improve crew working conditions.
  • May be used on FlowGuard Gold pipes and fittings.
Check Stock

NIBCO C4806 2 HXH 45 ELBOW PVC White, 2 Inch

  • 45-degree elbow for connecting two pipes at an angle.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock