Top Compressor Pulleys

HPDAVV Rotary Screw Air Compressor 10HP / 7.5KW - 39-35CFM @ 125-150PSI - 230V/ 1 or 3-Phase/ 60Hz - NPT3/4" Variable Frequency Drive - Commercial Air Compressed System - PACK7V

  • 【Specifiction】: Power : 10HP / 7.5KW , Voltage : Input Voltage ( V / Hz ) : 230V/60Hz.
  • Electrical ( Phase ) : 1ph , Output Pipe Diameter : NPT 3/4” , Air Flow : 39 cfm , Max Working Pressure : 115 psi / 8 bar , Full Load Amps : 13.3A..
  • 【Characteristics】: The VSD compressor allows you to save operating costs when your application does not require the compressor's full capacity.The features or VSD compressor is that will save energy consumption needed during loading process and energy consumption under constant voltage..
  • 【Multiple Applications】The air compressor pump is widely used for chemical industry, light industry, textile, food processing, health, electronics, machinery, mining, construction, scientific research and other requirements of high-quality compressed air sector.Ideally suitable for variable air demand from low to medium volumes, also providing either direct driven from the motor or belt driven via pulleys from the motor..
  • 【ASME Certified NEMA Motor】Equipped with an iron construction with cast cylinder sleeves, this pump head is designed for a long time use and is easy for maintenance. Can replace this pump for origin engine, the cost of this complete pump is half the cost of repair parts for the original pump reb....
Check Stock

ICT Billet SBC Alternator Power Steering A/C Compressor Bracket Kit for Long Water Pump 305 327 350 383 5.0L 5.7L V8 Eight Cylinder Carburetor V Belt Compatible With Chevrolet 551745

  • Compatible with SBC engines with long water pump.
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum.
  • For use with Sanded 508 V-belt pulley A/C compressor.
  • This kit works with 3-rib V-belt pulleys.
  • Includes: brackets, instructions, and mounting hardware.
Check Stock

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

  • Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
  • Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
  • Steel or thermoplastic construction provides high durability for extended life.
  • Industry's best light-duty coverage and consistently first to market for late model application coverage.
  • Vibration damping system extends life of tensioner and other accessory components.
Check Stock

OTC 4754 Universal Pulley Holder Wrench with Interchangeable pins

  • Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.
  • Wrench is adjustable from 1-1/2 to 8-5/8 inches, allowing it to work with a wide variety of pulleys.
  • Includes 4 different sets of interchangeable step pins.
  • Long handle enables you to easily hold the pulley when tightening or loosening retaining bolts.
  • Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Garage Door Extension Spring Pulley Sheave Kit +SAFETY CABLES & INSTRUCTIONS (1set）

  • Replacing the pulleys on your door will make the door run much smoother and prevent cable wear. Replace the door cable and install.
  • PLEASE-INSTALL SAFETY CABLES ON YOUR EXTENSION SPRING DOOR 6 RIVETS IN EACH HEAVY DUTY BALL BEARING PULLEY.
  • INCLUDED IN THIS KIT: 2 - 3" STUD PULLEYS 2 - 3" CLEVIS PULLEYS 4-3/8" BOLTS 4-3/8" NUTS 4-3/8" LOCK WASHERS 1 PAIR-1/8" DOOR CABLE 1 PAIR-1/8" SAFETY CABLE 2-CABLE LACING BRACKETS 2-S HOOKS 2-5/16" EYE BOLTS 4-5/16 NUTS.
  • INSTRUCTION SHEET REPLACING THE PULLEYS ON YOUR GARAGE DOOR MAKES THE WORLD OF DIFFERENCE YOUR DOOR WILL RUN MUCH SMOOTHER. THIS IS NORMAL MAINTENANCE THAT CAN EASILY.
Check Stock

Lisle 39000 Pulley Puller

  • The unique puller body completely houses the pulley hub to prevent slipping on even the tightest pulleys.
  • Works on traditional V-shaped pulleys and serpentine belt system pulleys.
  • Also works faster than other conventional pulley pullers.
  • Fits most domestic models including GM 3.1 and Quad 4 engines.
Check Stock

Hayden Automotive 5980 Idler and Belt Tensioner Pulley

  • These pulleys assist in belt routing and tensioning within the accessory drive system. Air conditioning compressors, alternators, power steering pumps, and water pumps are aided by the function of Idler Pulleys. All Idler Pulleys are of the highest quality and meet or exceed OE specifications..
  • Extends belt and accessory drive bearing life.
Check Stock

Garage Door Extension Spring 27x48x220 for 8' High Doors 220LB Green (Qty 2)

  • Replacing the pulleys on your door will make the door run much smoother and prevent cable wear. Replace the door cable and install.
  • PLEASE-INSTALL SAFETY CABLES ON YOUR EXTENSION SPRING DOOR 6 RIVETS IN EACH HEAVY DUTY BALL BEARING PULLEY.
  • INCLUDED IN THIS KIT: 2 - 3" STUD PULLEYS 2 - 3" CLEVIS PULLEYS 4-3/8" BOLTS 4-3/8" NUTS 4-3/8" LOCK WASHERS 1 PAIR-1/8" DOOR CABLE 1 PAIR-1/8" SAFETY CABLE 2-CABLE LACING BRACKETS 2-S HOOKS 2-5/16" EYE BOLTS 4-5/16 NUTS.
  • INSTRUCTION SHEET REPLACING THE PULLEYS ON YOUR GARAGE DOOR MAKES THE WORLD OF DIFFERENCE YOUR DOOR WILL RUN MUCH SMOOTHER. THIS IS NORMAL MAINTENANCE THAT CAN EASILY.
Check Stock

GM Genuine Parts 12679524 Fuel Injection Throttle Body with Throttle Actuator

  • Polished Billet Aluminum Pulleys & Brackets CNC Machined in the USA all backed by a Lifetime Warranty Guarantee!.
  • 8 Rib Serpentine Pulleys for Increased Grip and Performance while reducing slippage.
  • Includes All Pulleys, Brackets and Hardware for a Complete Installation.
  • Requires Electric Water Pump and Saginaw PS Pump with Keyway Shaft.
  • Fits Small Block Chevy 283 302 305 350 400 Engines.
Check Stock

Chevy Small Bock Serpentine Conversion Kit - Alternator & Power Steering Applications

  • Polished Billet Aluminum Pulleys & Brackets CNC Machined in the USA backed by our industry leading Lifetime Warranty!.
  • 8 Rib Serpentine Pulleys for Increased Grip and Performance while preventing slippage!.
  • Includes All Pulleys, Brackets and Hardware for a Complete Installation.
  • Requires Long Water Pump and Saginaw PS Pump with Keyway Shaft.
  • Designed to fit all Small Block Chevy 283 302 305 327 350 400 Engines with a long water pump..
Check Stock