Top Computer Case Pc Case

Demon Slayer Anime Stickers for PC Case,Cartoon Decor Decal for ATX Computer Skin,Waterproof Vinyl Graffiti Decal,Easy Removable (Black and White)

  • PC case sticker is waterproof and you can clean it with a wet cloth，The sticker material is PVC.
  • This product is a hollow sticker. If your chassis has a lighting effect, it will not block the light,and it will not affect the cooling of the computer.
  • Stickers can be removed without residue, but they cannot be reused after removal.
  • This product includes a front pattern sticker, a side glass sticker and a text sticker. Please select the sticker suitable for the color of your PC case according to the illustration.
  • The product contains a manual with detailed instructions. Please refer to the instructions for operation.
  • The pattern size is shown in the figure. If your computer case is smaller than the pattern size, it is between 2 ~ 3cm and can be cut after pasting.
  • Applicable PC case type： Right angle hexagona case, not suitable for special shape case !.
Check Stock

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
  • PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
  • PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
  • 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with t....
Check Stock

Micro-ATX Case, MOROVOL 2pcs 120MM ARGB Fans Computer Case USB 3.0×2 Micro ATX Tower Computer Case Opening Tempered Glass Panel & Mesh Front Panel Airflow MATX Gaming PC Case (TW7, Pink)

  • ...This PC case Included a ARGB controller and 2pcs ARGB fans. With the ARGB controller, through connecting 5V 3PIN interface of motherboard to achieve fans sync color. Each addressable ARGB fan offers 16.8 million colors to create a stunning lighting effect. The high light-transmitting glass side panels showcase your computer's ARGB colors. (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, and it is recommended to use button control only.).
  • 【Top I/O Panel】The micro pc case TW7 is designed with 2 x USB3.0 ports for faster transfer speed. With HD audio and microphone ports to enjoy lossless sound quality. Dedicated LED buttons can be used to control 19 lighting modes for ARGB fans..
  • 【Proper Interior Space】This Micro ATX mid tower case provides an appropriate space to build your system and manage the cables. It supports to install 1 x 2.5" SSD & 2 x 3.5" HDD or 2 x 2.5" SSD & 1 x 3.5" HDD, and supports Micro ATX/ITX motherboard, 120mm water cooling, maximum length 280mm GPU, maximum length 160mm CPU air cooling and maximum length 160mm PSU..
  • 【The Superior Micro Case】MOROVOL TW7 computer case which is stylish and compact, has a extreme cooling effect. It is equipped with expensive magnetic tempered glass side door and a dus....
Check Stock

MOROVOL Mesh Micro-ATX Tower Computer Case, 2PCS × ARGB Fans Pre-Installed and 2×USB 3.0 Ports, Magnetic Design Opening Tempered Glass Panel & Mesh Front Panel Mini-ITX Gaming PC Case, White

  • ...This PC case Included a ARGB controller and 2pcs ARGB fans. With the ARGB controller, through connecting 5V 3PIN interface of motherboard to achieve fans sync color. Each addressable ARGB fan offers 16.8 million colors to create a stunning lighting effect. The high light-transmitting glass side panels showcase your computer's ARGB colors. (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, and it is recommended to use button control only.).
  • 【Top I/O Panel】The micro pc case TW7 is designed with 2 x USB3.0 ports for faster transfer speed. With HD audio and microphone ports to enjoy lossless sound quality. Dedicated LED buttons can be used to control 19 lighting modes for ARGB fans..
  • 【Proper Interior Space】This Micro ATX mid tower case provides an appropriate space to build your system and manage the cables. It supports to install 1 x 2.5" SSD & 2 x 3.5" HDD or 2 x 2.5" SSD & 1 x 3.5" HDD, and supports Micro ATX/ITX motherboard, 120mm water cooling, maximum length 280mm GPU, maximum length 160mm CPU air cooling and maximum length 160mm PSU..
  • 【The Superior Micro Case】MOROVOL TW7 computer case which is stylish and compact, has a extreme cooling effect. It is equipped with expensive magnetic tempered glass side door and a dus....
Check Stock

Raidmax ATX Desktop Computer Gaming PC Case Mid Tower PC Case with addressable RGB x3 ARGB Fans ATX PC Case USB 3.0 Tempered Glass PC Case Mesh Window Computer Case with 3 ARGB LED Black PC Case -i403

  • ...empered glass panel with mesh on the side which won't block airflow with 3 ARGB fans in the front for maximized airflow and offering a crystal-clear view of the ARGB fan..
  • x3 120mm ARGB Fans - Not 1, not 2, there are 3 whopping addressable RGB fans in the I-403 gaming computer mid tower PC cases. It is capable of operating quietly while moving high volumes of air with ARGB lighting effects..
  • ARGB Lighting System - The pre-installed ARGB ATX computer gaming pc case with fans can be managed by the button on I/O panel to create a comprehensive ARGB lighting system..
  • Tempered Glass PC Case Side Panel - Flex your gaming hardware, custom-loop cooling, anything you put inside your mesh computer case is shown in a panoramic view through an edge-to-edge tempered glass side panel..
  • Optimized Airflow with Magnetic Dust Filter - Filtered ventilation on the top panel of the ATX PC case provides additional thermal support while also offering mounting options for future cooling upgrades with magnetic dust filter included..
Check Stock

MOROVOL Mesh Matx (Micro-ATX) Case Tower Computer Case, 2PCS × ARGB Fans Preinstalled and 2×USB 3.0 Ports, Magnetic Design Opening Tempered Glass Panel & Mesh Front Panel Gaming PC Case(TW7-S2-BL)

  • ...This PC case Included a ARGB controller and 2pcs ARGB fans. With the ARGB controller, through connecting 5V 3PIN interface of motherboard to achieve fans sync color. Each addressable ARGB fan offers 16.8 million colors to create a stunning lighting effect. The high light-transmitting glass side panels showcase your computer's ARGB colors. (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, and it is recommended to use button control only.).
  • 【Top I/O Panel】The micro pc case TW7 is designed with 2 x USB3.0 ports for faster transfer speed. With HD audio and microphone ports to enjoy lossless sound quality. Dedicated LED buttons can be used to control 19 lighting modes for ARGB fans..
  • 【Proper Interior Space】This Micro ATX mid tower case provides an appropriate space to build your system and manage the cables. It supports to install 1 x 2.5" SSD & 2 x 3.5" HDD or 2 x 2.5" SSD & 1 x 3.5" HDD, and supports Micro ATX/ITX motherboard, 120mm water cooling, maximum length 280mm GPU, maximum length 160mm CPU air cooling and maximum length 160mm PSU..
  • 【The Superior Micro Case】MOROVOL TW7 computer case which is stylish and compact, has a extreme cooling effect. It is equipped with expensive magnetic tempered glass side door and a dus....
Check Stock

Monolike Wow Sticker Gogh + Monet Set - Mini Size Cute Stickers, Square Stickers

  • PC case sticker is waterproof and you can clean it with a wet cloth，The sticker material is PVC.
  • This product is a hollow sticker. If your chassis has a lighting effect, it will not block the light,and it will not affect the cooling of the computer.
  • Stickers can be removed without residue, but they cannot be reused after removal.
  • This product includes a front pattern sticker, a side glass sticker and a text sticker. Please select the sticker suit.
  • The product contains a manual with detailed instructions. Please refer to the instructions for operation.
  • The pattern size is shown in the figure. If your computer case is smaller than the pattern size, it is between 2 ~ 3cm and can be cut after pasting.
  • Applicable PC case type： Right angle hexagona case, not suitable for special shape case !.
Check Stock

NieR:Automata Decor Stickers for PC Case,Anime Vinly Decal for ATX MId Tower Gaming Computer Skin,Waterproof Easy Removable Hollow Out Sticker (White and White)

  • PC case sticker is waterproof and you can clean it with a wet cloth，The sticker material is PVC.
  • This product is a hollow sticker. If your chassis has a lighting effect, it will not block the light,and it will not affect the cooling of the computer.
  • Stickers can be removed without residue, but they cannot be reused after removal.
  • This product includes a front pattern sticker, a side glass sticker and a text sticker. Please select the sticker suitable for the color of your PC case according to the illustration.
  • The product contains a manual with detailed instructions. Please refer to the instructions for operation.
  • The pattern size is shown in the figure. If your computer case is smaller than the pattern size, it is between 2 ~ 3cm and can be cut after pasting.
  • Applicable PC case type： Right angle hexagona case, not suitable for special shape case !.
Check Stock

DS PC LED Strip via Magnetic for Computer Case Mid Tower Full Tower (White Lighting, SATA Connector, 39 inch Length, S Series)

  • Magnetic Design: This LED Strips Are Firmly Attached to PC Case via Magnet Inside, Suitable for Iron Surface.
  • Plug and Play Design LED Strip with SATA Connector.
  • LED Strip Length: 47.2 inches(with 7.9 inches Cable).
  • Almost compatible with all models of PC case.
  • Good Quality&Super Brightness: Computer Case Light is Super Brighter Than The Normal LED Strips to Achieve Best Lighting Effect for Your PC Computer.
Check Stock

Fancasee (4-Pack) 4 Pin PWM Fan Power Supply Cable PC Internal Motherboard Fan Power Extension Cable Adapter Cord Wire for Computer ATX Case 4-Pin / 3-Pin Cooling Fans Cable (10.5 inch)

  • Excellent 4 pin PWM fan power supply extension cable for PC computer atx case internal motherboard fans, make you easier diy PC computer case..
  • Widely Compatible: support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans..
  • Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
  • Plug-n-Play, easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans..
  • Package contents: 4 pack black 10.5 inch fan power supply extension cables, male to female connector plug..
Check Stock

Zeus GAMDIAS Gaming ATX Mid Tower Gaming Computer PC Case with Tempered Glass and ARGB LED Strip, RGB Motherboard Sync

  • ...fans and 350mm long graphics card, high CPU cooler up to 168 mm, additional 2.5" SSD trays at the back panel, and easy-access dust filters at the top.
  • Excellent Air Flow for Low Temperature: The Mid Tower ATX PC Case is allowed to upgrade for Top: 2 x 120mm, 2 x 140mm computer case fans.
  • Rear: 1 x 120mm for outstanding ventilation. With AIO coolers up to 360mm for the front and top, it's the best gaming case to keep your PC temperature low..
  • Innovative and Extraordinary Design: Gamdias Mid Tower Case with innovative front RGB lighting panel with mixed glossy and matte black design brings the gaming PC chassis market a different and elegant design choice and makes your system builds astonishing..
  • Great Expandability for Your System Config.: With 2 x 3.5” HDD bays or 2 x 2.5” HDD Cages/ 2x 2.5" Tray, USB3.0 x1, USB2.0 x2, and the LED button, the desktop pc case gives DIY builders ultimate flexibility to personalize their PC. Furthermore, it supports different mobo from EATX, ATX, Micro-ATX, Mini-ITX . 7 expansion slots allow you to fully utilize your motherboard’s expandabilit....
Check Stock

AMANSON PC CASE ATX Mid Tower Case Tempered Glass Gaming Computer Case Without ARGB Fan Black

  • [Powerful Cooling System] AMANSON H6 Mid tower PC case can accommodate 10 ARGB 120mm fans to provide lighting while maintaining good airflow.Amanson PC cases support, ATX, Micro ATX and Mini ITX motherboards..
  • [Unique Design] H6 ATX Gaming Case is equipped with tempered glass on the front and left side of the case, allowing a clear view of the RGB lighting and the components inside the building, creating a great gaming atmosphere..
  • [More Space] AMANSON H6 Mid tower computer case with extra space inside, maximum length 360mm GPU, top of PC case designed for mounting 360/280/240mm radiator..
  • [Top I/O Panel] 1 USB3.0 port, 1*Type-c,1 HD audio, power button.ATX gaming case provides more convenience and entertainment for gamer..
  • [Super Cable Management] Back Bays:3.5*1 HDD's and 4 *2.5'' SSD's.H8 mid tower gaming pc case comes with 1 dust filter , a large space behind the motherboard tray for hidden cable management, this area will help you clean up the interior and improve airflow..
Check Stock