Top Concrete Anchor Bolt Washer

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

TOGGLER SNAPTOGGLE BDS Toggle Anchor 304 Stainless Steel Channel Made in US,3/8 to 2-1/2 Grip Range For 1/2 -13 UNC Fastener Size Pack of 25

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/2"-13 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 275 lb. in 1/2" drywall with a 1/2"-13 UNC bolt, and 2,038 lb. (material failure) in concrete block with a 1/2"-13 UNC hardened bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Wolf Tooth Precision-Machined Seatpost Clamp

  • The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself..
  • The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force..
  • Lightweight 6061 T6 aluminum, M5 stainless steel bolt with integrated washer.
Check Stock

TOGGLER SNAPTOGGLE BAS Toggle Anchor 304 Stainless Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BBS Toggle Anchor 304 Stainless Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BA Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 50

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BB Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range for 1/4 -20 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BB Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 50

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 10

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and includes 3/16"-24 UNC-threaded bolts.
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 10

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and includes 1/4"-20 UNC-threaded bolts.
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

T Anchor, 1/4 x 3 1/4, PK4

  • Price For: Each Includes: Body, Nut, Washer Meets/Exceeds: G.S.A. FF-B-588C, A.N.S.I. A58.1, A.S.T.M. B-633 Anchor Type: Toggle, Gravity Activated Type: T-Anchor Box Count: 4 per pack Head Style: Nut Ultimate Shear (Lb.): 1500 Ultimate Pullout (Lb.): 700 Thread Length (In.): 1.85" Size (In.): 1/4 x 3-1/4 Size: 1/4 x 3-1/4" Shank Length (In.): 3-1/4.
  • Max. Work Thickness (In.): 2-1/2 Hole Dia. (In.): 1/4 Grip Range (In.): 1 - 2-1/2 Bolt Dia. (In.) / Threads/In.: 1/4 - 20 Anchor Length (In.): 3-1/4 Anchor Dia./Drill Bit Sz. (In.)/TPI: 1/4 Country of Origin (subject to change): United States.
Check Stock

T Anchor 3/8 x 4 1/2 PK4

  • Price For: Each Includes: Body, Nut, Washer Meets/Exceeds: G.S.A. FF-B-588C, A.N.S.I. A58.1, A.S.T.M. B-633 Anchor Type: Toggle, Gravity Activated Type: T-Anchor Box Count: 4 per pack Head Style: Nut Ultimate Shear (Lb.): 3000 Ultimate Pullout (Lb.): 1000 Thread Length (In.): 1.8" Size (In.): 3/8 x 4-1/2 Size: 3/8 x 4-1/2" Shank Length (In.): 4-1/2.
  • Max. Work Thickness (In.): 3-1/8 Hole Dia. (In.): 3/8 Grip Range (In.): 7/8 - 3-1/8 Bolt Dia. (In.) / Threads/In.: 3/8 - 16 Anchor Length (In.): 4-1/2 Anchor Dia./Drill Bit Sz. (In.)/TPI: 3/8 Country of Origin (subject to change): United States.
Check Stock