Top Concrete Blade

Masonry Blade 12 Inch, Dry or Wet timeriver Diamond Saw Blades 12 Inch, Hot Pressing Process, High Durability, 12 Concrete Saw Blade, Retaining Wall, Granite, Marble, Concrete.…

  • Compatible with the R300DCT Concrete Cutting Saw and the R300DCT+ Concrete Cutting Saw.
  • Multi-material Cutting: One saw & One blade will cut most common building materials including ferrous & non-ferrous metals, reinforced concrete, bricks, tiles, plastics & more saving you time and money.
  • 30x Longer Life: Up to 30x longer blade life than abrasive discs when cutting metal Diamond cutting edge is incredibly tough and can make over 1,000 cuts through steel.
  • Constant Diameter: Steel blade body with diamond cutting edge maintains its full diameter so you have maximum cutting capacity for the lifetime of the blade.
  • Cleaner & Safer: The steel body won’t shatter, unlike abrasives, which can cause serious injury Less dust, less sparks & less odour vs abrasive discs, make this a safer cutting solution.
  • Segmented rim design with sub-segmented cutting edge improves efficiency & removes debris from the cut.
Check Stock

Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders & Circular Saws - Long-Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented Diamond Blades For Long-Lasting & Reliable 1.25” Depth Concrete, Cinder Block & Brick CUTTING | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makita’s advanced air flo....
Check Stock

Ctzrzyt 3Pcs Reciprocating Saw Blade Carbide Tip Cutters for Cutting Concrete Red Brick Stone Masonry Saber Saw Blade

  • Reciprocating saw blade for cutting bricks, concrete, gypsum boards, lime sand bricks, and lightweight concrete blocks..
  • Suitable for cutting porous concrete, red brick, fiber cement, glass fiber reinforced plastic, epoxy resin, etc..
  • Suitable for abrasive materials. This reciprocating saw blade is designed to reduce the amount of dust generated, and the weight is optimized to....
Check Stock

CORMAC CQ300 walk behind concrete floor saw max 14 blade gasoline engine 6.5 Hp Kapa and water tank INCLUDES 1 x 14 concrete blade

  • CORMAC CQ300 walk behind concrete saw max 14" blade with 6.5 Hp gasoline engine and water tank.
  • Cormac floor saws are designed for strength, durability and performance whether cutting concrete or asphalt, the reinforced steel box frame designs....
Check Stock

VEVOR 12" Electric Concrete Saw, 1800W Concrete Cutter 15Amp Cut-off Saw, Wet/Dry Corded Circular Saw with 12" Blade and Attachments, 4" Cut Depth Masonry Saw for Granite, Brick, Porcelain

  • ...r outstanding cutting performance. The 7" blade is sturdy enough to cut most materials..
  • Considerate Designs: The water line feeds water to the blade, decreasing dust. Secure cover blocks the flying objects during your operation. The double protection switch stops the concrete cutter from accidentally opening. Two handles can aid accurate cutting in both horizontal and vertical modes..
  • Practical Accessories Kits: Our concrete wet/dry saw is supplied with a 7" diamond blade and different tools, including a water pipe, water pump, socket, wrench, splash guard, and screws. All of these tools can help you in your cutting operation..
  • Multi-function Concrete Saw: The electric concrete saw efficiently delivers the power to cut through granite, brick, porcelain, reinforced concrete, bricks, wood, and other materials. It is perfect for factories, workshop, home, timber industries, and DIY..
Check Stock

Archer PRO 20 in Turbo Diamond Saw Blades for Fast Reinforced Concrete Cutting and Cured Concrete Cutting

  • CONCRETE SAW BLADE ✔️ Soft bonded Turbo Segments for Aggressive Cutting cured and reinforced concrete.
Check Stock

TOMAHAWK Power Screed Concrete Finishing Vibra Tool with 14 ft & 8 ft Boards Bull Float Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes 14’ and 8’ hardened aluminum boards for float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

TOMAHAWK Power Screed Concrete Finishing Vibra Tool with 12 ft & 10 ft Boards Bull Float Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes 12’ and 10’ hardened aluminum boards for float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

Virginia Abrasives 425-07388 UV Multi-Purpose High Speed Diamond Blade (14\) Asphalt/Concrete Cutter - Wet or Dry - High Speed Cutoff - Performance Cutting Blades (14\ x .125\ x 1\/20mm DP - 10mm Segments)

  • HIGH-SPEED DIAMOND BLADE: Virginia Abrasives laser welded diamond blades are ideal for concrete cutting, or dry cutting, due to their high welding strength. Our laser welded diamond Blade will have a longer life span and stronger cut than brazed diamond blades as the bond between the segment and core is significantly stronger..
  • LASER WELDED SEGMENTS: Rather than sintered blades that have a shorter life and do not cut as efficiently, the Virginia Abrasives diamond saw blades are laser welded to extend the life of every saw diamond blade as well having the ability to cut faster..
  • HIGH-LEVEL PRECISION: As well as reducing the strain on the concrete structure, the high-performance nature of our diamond concrete saw blades make sure it gives it a smooth cut. For more comfort and high-speed cutting, choose our saws blades for your next project..
  • DURABLE: Virginia Abrasives diamond saw blades are highly durable compared to other types of concrete cutting blades out there. Our diamond blade is made using a circular steel cutting disc with huge 12-mm segments on the outer edge that will maintain precision and performance for a long time.
  • OUR STORY: Virginia Abrasives' roots date back to the early 1970s when a hard rock garnet mining business in the Adirondac....
Check Stock

VICSEC 110V 6800W Electric Concrete Saw 14" Wet/Dry Circular Saw with 135 Saw Blade and Rolling Pulley Masonry Cutting Tool for Granite, Porcelain, Wood,Concrete, Stone, etc.

  • 【Powerful motor and heat dissipation function】： This new circular saw concrete cutting machine has a power of 6800W and a motor speed of 4600r/min, which greatly improves work efficiency, and has 360° all-round heat dissipation, so there is no need to worry about damaging the machine under high-intensity operations，safe to use..
  • 【Dust-proof design, wet and dry use】:The tile saw adopts a dual integrated dust management system is adopted, and the dust extraction port discharges cutting debris in time.
  • the water inlet accessory is built in during wet cutting, and the convenient valve controls the flow, and the water pipe supplies water to the blade to reduce dust, Improve blade performance and life.
  • 【With rolling pulley, cutting labor saving】: The wall chaser concrete cutter has its own roller design, which saves effort, and can be flexibly installed or disassembled according to the actual situation..
  • 【Sharp cutting, all-round protection】: The cement saw is equipped with a sharp saw blade with a diameter of 350mm, and the cutting depth can reach 130mm..
Check Stock

TOMAHAWK 37.7cc Gas Concrete Power Screed Cement Finishing Vibrating Motor with 10ft Aluminum Board Straight Edge Bar Vibra Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes hardened aluminum 10’ board float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

RVIQI 9PCS Concrete Hole Saw Set,Tungsten Steel SDS Plus Shank Masonry Wall Hole Opening Drill Bits for Brick, Concrete, Cement Stone

  • PACKAGE INCLUDED- 5 PCS Hole Opener：1-2/11”(30mm), 1-3/5”(40mm), 2-9/16 “(65mm), 3-5/32”(80mm), 3-15/16”(100mm).
  • 2PCS SDS connecting rod: SDS 11-13/16”(300mm), SDS max 11-13/16”(300mm).
  • HIGH MATERIAL- Our concrete hole saw set is made of tungsten steel and carbide, durable and works under rough conditions,but also super safe to use and simple..
  • UNIQUE BLADE DESIGN- The concrete hole saw’s blade is made of raw materials, thicker and sharper than other ordinary blade. Can easily penetrate steel bar up to 6mm..
  • WIDE APPLICATION- The masonry wall cutter bit kit fits SDS plus hammer drills. Perfect used for Brick, concrete, cement, stone, mixed brick wall, foam wall and installation of air-conditioner..
  • LIFETIME GUARANTEE- We focus on the quality of products and care about your satisfaction. If you have any question, please contact us by email or Q&A, the reply will be provided within 24 hours..
Check Stock