Top Concrete Blades

Diamabrush By Malish 941601202 16-inch Concrete Prep Plus Tool, 25 Grit, Counter Clockwise with NP9200 Clutch Plate and 1.5-inch Riser

  • Abrades the surface to prep for difficult jobs. The ultimate concrete prep tool for hard-to-prep surfaces..
  • Perfect for removing a thin layer of paint or epoxy. This new heavy duty prep tool is ideally suited to prep concrete floors for an application of paints, epoxies, or stains..
  • Uses a 25 diamond grit bonded to metallic backing and assembled to flexible steel spring blades.
  • Flexible blades designed to always remain in contact with the floor regardless of floor imperfections.
  • The concrete prep Plus tool can be used with any floor buffer or auto-scrubber.
Check Stock

SRW Products Concrete Forming Round Steel Stakes with Holes 3/4 X 24 10 Pack 10

  • Power Screed with 1.6 HP Honda Engine and 12ft, 8ft, and 4ft Aluminum Board Straight Blades.
  • Accurately level up to 4 times more concrete than traditional concrete tool methods.
  • Easy handling throttle and handles while lightweight for on and off the job site.
  • 3 Year Honda Engine Warranty & 1 Year Power Screed Vibrator Motor Warranty.
  • Easily change blades in less than 2 minutes.
Check Stock

Makita 2 Pack - 4” Continuous Diamond Blades For 4”+ Grinders & Circular Saws - Precise Cutting For Tile, Porcelain & Stone - 5/8”, 20mm & 7/8” Arbors

  • ...sults, consider using Water to flush out debris and Extend Blade Life.
  • ✅ PRECISELY & EASILY CUT Marble, Granite, Stone, Glass, Porcelain & Ceramic Tile, including Flagstone & PermaBase with Minimal Material Crack OR Shatter Risk | TURBO & SEGMENTED Steel blades are ideal for FASTER and LONG-LASTING Cuts in General Concrete & Non-Tile/Stone Masonry.
  • ✅ AVOID BLADEWEAR Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other blades that may warp or prematurely wear.
  • ✅ DESIGNED for Hard and Continuous use by professionals in construction, concrete fabrication, general maintenance, Tile, Granite, Stone & general industrial applications, these blades are Quality tested and laser welded for unsurpassed blade integrity, planned to outperform other blades in its class | Each blade is engineered to work at 15,300 RPM at a 1 Inch maximum cutting depth.
Check Stock

Virginia Abrasives Ultra Value Concrete Diamond Blade - Wet or Dry Concrete Tools/Masonry Tools, 14\ Saw Blades, Cutting Tool for High Speed & Walk Behind Saw, General Purpose Ceramic Blade, 14 inches

  • DIAMOND BLADE CUTTING WHEEL: Virginia Abrasives' diamond blades are the ideal concrete cutting blade for High-Speed Saws, Walk Behind Saws, and Cut-Off Saws due to their high welding strength. With a significantly stronger bond between the segment and core, our diamond saw blades are sure to offer a longer life span..
  • LASER WELDED SEGMENTS: We ensure that your tough jobs are completed quickly with our industrial diamond blade 14 inch cutter. With laser-welded segments, it extends the life of every saw diamond blade while performing to its utmost ability..
  • HIGH-LEVEL PRECISION: As one tries to reduce the strain on the concrete structure, our 14 inch concrete saw blade makes sure to provide a high-performing smooth cut. Freely choose our diamond concrete saw for easy high-speed cutting on your next project..
  • DURABLE QUALITY: Our masonry blade is made with an industrial diamond that can outperform regular blades. It is made using a circular steel cutting disc with huge 12mm segments on the outer edge that will maintain precision grinding performance for a long time..
  • OUR STORY: Virginia Abrasives was founded in the early 1970s during a period of hard rock garnet mining in the Adirondack Mountains of New York. Over time, the company's markets and product lin....
Check Stock

TOMAHAWK 37.7cc Gas Concrete Power Screed Cement Finishing Vibrating Motor with 10ft Aluminum Board Straight Edge Bar Vibra Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes hardened aluminum 10’ board float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

Virginia Abrasives Ultra Value Concrete Diamond Blade - Wet or Dry Concrete Tools/Masonry Tools 14 Saw Blades Cutting Tool for High Speed & Walk Behind Saw General Purpose Ceramic Blade 14 inches

  • DIAMOND BLADE CUTTING WHEEL: Virginia Abrasives' diamond blades are the ideal concrete cutting blade for High-Speed Saws, Walk Behind Saws, and Cut-Off Saws due to their high welding strength. With a significantly stronger bond between the segment and core, our diamond saw blades are sure to offer a longer life span..
  • LASER WELDED SEGMENTS: We ensure that your tough jobs are completed quickly with our industrial diamond blade 14 inch cutter. With laser-welded segments, it extends the life of every saw diamond blade while performing to its utmost ability..
  • HIGH-LEVEL PRECISION: As one tries to reduce the strain on the concrete structure, our 14 inch concrete saw blade makes sure to provide a high-performing smooth cut. Freely choose our diamond concrete saw for easy high-speed cutting on your next project..
  • DURABLE QUALITY: Our masonry blade is made with an industrial diamond that can outperform regular blades. It is made using a circular steel cutting disc with huge 12mm segments on the outer edge that will maintain precision grinding performance for a long time..
  • OUR STORY: Virginia Abrasives was founded in the early 1970s during a period of hard rock garnet mining in the Adirondack Mountains of New York. Over time, the company's markets and product lin....
Check Stock

Delta Diamond Cougar HD 14 Inch Diamond Saw Blade, Supreme Grade, for Reinforced Concrete with Rebar, Masonry, Stone, Laser-Welded, Segmented-Turbo, .125 Width X 1\-20mm Arbor (14\)

  • SUPREME GRADE TURBO SEGMENTS - Cougar HD diamond saw blades are designed with supreme quality turbo segments for fast, smooth, heavy-duty cutting of concrete with rebar, cured concrete, masonry, and stone. Lasts 2x longer than competitors' blades..
  • PROFESSIONAL QUALITY - Made for use in a high-production environment by professional concrete cutters. Built to perform and last under the most demanding applications. Comparable to other industry-leading blades for a fraction of the price..
  • USE WET OR DRY - The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole, 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. The 3/8" core holes are used as depth indication as well as cooling and dust/slurry removal..
  • LIFETIME WARRANTY + FREE RETURN SHIPPING - All Delta Diamond Products, Inc. diamond blades, coring bits, hole saws and cup wheels feature a lifetime limited warranty against warping, cracking and/or material defects. If any diamond tool (being used for its intended purpose with at least 50% of the wear remaining) fails to perform properly, or if the bond between th....
Check Stock

TOMAHAWK Power Screed Concrete Finishing Tool with 12ft, 8ft, and 4ft Blades Bull Float Honda GX35

  • Power Screed with 1.6 HP Honda Engine and 12ft, 8ft, and 4ft Aluminum Board Straight Blades.
  • Accurately level up to 4 times more concrete than traditional concrete tool methods.
  • Easy handling throttle and handles while lightweight for on and off the job site.
  • 3 Year Honda Engine Warranty & 1 Year Power Screed Vibrator Motor Warranty.
  • Easily change blades in less than 2 minutes.
Check Stock

TOMAHAWK Power Screed Concrete Finishing Tool with 14ft, 8ft, and 4ft Blades Bull Float Honda GX35

  • Power Screed with 1.6 HP Honda Engine and 14ft, 8ft, and 4ft Aluminum Board Straight Blades.
  • Accurately level up to 4 times more concrete than traditional concrete tool methods.
  • Easy handling throttle and handles while lightweight for on and off the job site.
  • 3 Year Honda Engine Warranty & 1 Year Power Screed Vibrator Motor Warranty.
  • Easily change blades in less than 2 minutes.
Check Stock

ROCKPORT Combo 4 1/2 Diamond Blade for Angle Grinder Set - (3 Pack) Diamond Saw Blade & Grinder Blade for Dry/Wet Tile, Diamond Cutting Wheel for Stone, Granite, Concrete, 5/8\ - 7/8\ Arbor Tile Blade

  • CUTS THE TOUGHEST MATERIALS: Our 4 1/2" diamond blades for angle grinders are constructed with the highest precision so our diamond saw blades cut through porcelain tile, roof tile, brick, concrete, granite, marble, ceramic & masonry..
  • LONG LIFE: Built from high carbon steel with a diamond outer ring, our 4 1/2 inch diamond tile saw blades provide one of the longest lifetimes in the industry. Our grinder saw discs are diamond impregnated to minimize vibrations and breakage..
  • COMBO PACK FOR OPTIMIZED PERFORMANCE: Our 4 1/2 inch diamond blade & tile blade combo pack includes: Turbo, Continuous and Segmented tile blade 4 inch. These saw diamond blades ensure you have the right disc for the job..
  • COMPATIBLE WITH A VARIETY OF TOOLS: Our 4 1/2 inch saw glass tile diamond blades for porcelain have a 5/8 inch arbor making them compatible with tools such as: grinders, angle grinders, rock saw blades & concrete saws..
  • PROUDLY AMERICAN OWNED: Rockport products are American-owned and operated. With an enduring commitment to quality and design, we’re honored to be trusted by you and promise to always deliver lasting products to our loyal customers..
Check Stock

QEP 6 in. x 2 in. Comfort Grip Flat Margin Flooring Trowel with Bucket Hook, Silver (42112)

  • ...s prevent aggregate popping, can be used for application, smoothing, polishing and shining.
  • [Ergonomics Handle] No-turn handle design, ergonomic, camel-back wood handle makes them comfortable to use for less hand fatigue. Strong aluminum mounting securely welding with blades for long lifespan.
  • [Size Include] 3 Pieces concrete finishing trowels set includes 14’’ x 4’’, 12’’ x 4’’ & 8’’ x 3’’ different sizes, meet your different using requirement, will make your lives on the installation job easier, more efficient and more profitable.
  • [Professional Grade] The Goldblatt Concrete Finishing Trowels are an excellent choice for concrete hand work. Classically styled with a traditional camel-back wood handle, this trowel has been the industry standard for decades, will last for years to come.
Check Stock

WHIRLWIND USA LSS 5-Inch Dry or Wet Cutting General Purpose Power Saw Segmented Diamond Blades for Concrete Stone Brick Masonry (5\)

  • LSS diamond blades increase the density of diamonds and use higher-grade diamonds, which have high strength and are not easily deformed.
  • LSS granite saw blade adopts hot pressing process, combined with high-quality raw materials, to ensure the low amplitude and low noise of the product during high-speed operation.
  • LSS diamond blades can be used for both dry and wet, improving the diamond cutting speed and there are more sizes for selection.
  • Segment height 10mm. Arbor 7/8"-5/8". Size is 5"x.070"x.395"/10mm..
  • LSS concrete blade adopts the design of turbine teeth and widens the cutter head, so that the cutting speed is faster and the performance is stable.
  • LSS saw blades are designed to improve efficiency and excellent performance, and can provide fast and smooth cutting in bricks, pavements, concrete, granite, quarries and other stones.
Check Stock