Top Concrete Floor Polishing

Diamond Polishing Pads 5 Inch Wet Dry Set 8 Pieces for Marble Quartz Stone Countertop Granite Concrete Polishing - by POLISHSURF

  • Concrete Polishing Pads 5 Inch for Travertine Quartz Concrete Marble Granite Polishing.
  • 5 Inch Polishing Pads for Granite includes 1 x Grit #50 #100 #200 #400 #800 #1500 #3000.
  • 1 Pc Hook and Loop Backing Pad for Granite Pads Polishing Marble and Concrete Polishing Pad.
  • Wet Diamond Polishing Pads and Dry Polishing Pads. Recommended to use with Water for Best Results.
  • Granite Diamond Polishing Pads for Stone Polishing Pads and Concrete Sanding Pads at Max RPM - 5000. Never Use with High Speed Grinder.
Check Stock

SZSYD 4Pcs Diamond Hand Polishing Pads for Sanding Ceramics Glass Tile Concrete Stone Marble Granite, 60#, 100#,200#,400#

  • 【Complete Set】The diamond pads include grits 60#, 100#, 200#, 400#. One set can satisfy most of your polishing work.
  • 【Foam Backer】The foam back of these diamond sanding pads are soft and light, which are suitable for you to hold.
  • 【Wide Applications】The diamond hand pad can be used as granite polishing pads, concrete sanding pads and can be used in tile trimming, sanding stone, wood deburring, glass sanding, metal polishing renovation and so on.
  • 【Recommendation】Grit 60 polishing block, for fast and rough grinding, like polishing floor tiles and general slate. Grit 100 & 200 are medium rough, which could remove the details. Grit 400 polishing pad for fine polishing. Wet / Dry polishing are both OK, the wet polishing will be better.
  • 【Size】The size of the diamond polishing pad is 3.6 x 2.4 x 1.2 in / 92 x 62 x 31 mm.
Check Stock

4 Inch Diamond Polishing Pads with 5/8’’-11 Backer Pad, 12PCS Wet/Dry Granite Stone Polish Pad Kit for Drill, Grinder, Polisher, 50-6000 Grit Polishing Pad for Concrete Marble Stone Countertop Quartz

  • 【HIGH PERFORMANCE GRANITE POLISHING KIT】: The granite diamond polishing pads are made of high quality diamond and resin. Fast grinding force, good flexibility, wear-resistance, high polishing efficiency and long service life.
  • Wool felt buffing pads are made of natural compressed wool, favored for superior buffing properties, versatility & durability, polish surfaces to their glossiest without causing damage..
  • 【WET/DRY MARBLE POLISHING】: The flexible concrete polishing pad kit are designed for wet and dry polishing, less dust, improve gloss finish in a short time. 50-200 grit suit for wet or dry polish.
  • 400-6000 grit must be used with water to ensure the best polishing results..
  • 【EASY TO USE】: Hook and Loop backing, easy installation and removal, convenient for you to change out. Save time, improve work efficiency.
  • 5/8''-11 thread backing pad with 8mm drill adapter can easily connect to your variable speed polisher, angle grinder, household power drill or other rotary tools. Check your machine thread and speed before use..
  • 【IDEAL FOR MOST STONE PROJECTS】: The 4 in diamond marble polish pad kit is perfect for kind of surface or edge of quartz, granite, marble, terrazzo floor, glazed tiles, vitrified tiles, natural stone, glass and concrete....
Check Stock

QuickT PPW702E Stone Granite Marble Quartz Concrete 4\ Wet Diamond Polishing Sanding Polisher Pads Kit Tools for Wet Polisher Grinder, Includes Countertop Polish DIY Guide & Video

  • A COMPLETE KIT - QuickT diamond polishing pad - Concrete Stone polishing kit for granite marble quartz concrete wet polishing of countertop for high gloss finish. The concrete stone granite marble quartz granite polishing kit includes 11 pads and 1 backing pad comes with granite polishing pads.
  • INCLUDES COMPLETE DIY GUIDE - The granite stone marble concrete countertop polisher kit comes with DIY instruction video and step by step instructions and customer support to answer any query you may have during your project. Your true companion for your next successful countertop polishing project..
  • HIGH GLOSS SHEEN - The granite stone concrete marble polishing kit set includes wet diamond sanding polishing pad 2X (grit 50, 100, 200), and one each for 400, 800, 1500, 300, 6000 and one backing pad holder with 5/8" 11 female thread. Results in high gloss sheen on granite, concrete, marble, stone countertops, recommended to use with water wet polisher grinder..
Check Stock

INTBUYING Concrete Floor Grinder Electric Floor Grinder Cement Ground Concrete Polishing Machine Dust Extraction 15 Inch Walk-Behind 220V Diamond Disc Terrazzo Marble Ground

  • 【Wide Application】It is suitable for the restoration of the flatness of the new ground, roughening the surface, and refurbishing the old epoxy. In addition, it is also suitable for small-scale polishing. Suitable for polishing epoxy floor, cement floor, marble floor, steel plate rust removal, etc..
  • 【Hard and Stable Chassis 】Diamond chassis is sharp, hard, wear-resistant,Good sanding effect and high quality.Highly adaptable cement floors can also be fully hardened and work can be done at the root of the wall..
  • 【High Efficiency】The pure copper motor is of high quality and the product is sturdy and durable. The new statorand rotor of the motor can easily realize the conversion of electrical energy and mechanical energy..
  • 【Meet Your Different Needs】 : The concrete floor grinder is equipped with triangular plates and sticky discs, sticky discs with resin grinding discs to adapt to different floor polishing, easy to disassemble..
  • 【Human Designed】The handle has two holes to adjust the height.It can be adjusted freely according to height.Movable handrails for easy trans....
Check Stock

POLISHSURF 5 Inch Diamond Concrete Polishing Pads Wet Dry Set for Quartz Marble Stone Countertop Concrete Granite Polishing

  • Diamond Polishing Pads 5 Inch Wet Dry for Travertine Marble Quartz Granite Concrete Polishing.
  • 5 Inch Concrete Sanding Pads for Granite includes 1 x Grit #50 #100 #200 #400 #800.
  • 1 Hook and Loop Backing Pad for Granite Pads Polishing Marble and Concrete Polishing Pad 5 Inch.
  • Granite Polishing Kit and Dry Polishing Pads. Recommended to use with Water for Best Results.
  • Stone Polishing Pads and Granite Buffing Pads at Max RPM - 5000. Never Use with High Speed Grinder.
Check Stock

VEVOR Electric Concrete Floor Grinder 10" Walk-Behind Grinder 1.5HP Concrete Floor Polisher, 34"-46" Adjustable Grinding Machine, 1720RPM 1Phase Surfacing Grinder for Granite/Marble/Concrete/Stones

  • Above and Beyond Power: Get ready for the power you have to see to believe. A 1.5 HP pure copper motor drives the polisher up to a speed of 1720r/min to offer a strong polishing force and effect. In addition, the abrasive disk is sharp, hard, and wear-resistant. The grinder delivers smooth performance over a variety of applications. Work smarter and faster!.
  • Wet or Dry, You Choose: Decide your mode and take control! Our concrete floor grinder is available in both dry and wet modes. With your choice of modes, you can easily polish uneven surfaces. And the solid steel construction is corrosion-proof and rust-proof. The combination of heavy-duty material and dual modes is enough to make the grinder handle any challenges..
  • Adjust to Meet Your Needs: Say goodbye to tired hands. The handle of our floor polisher is ergonomically designed for longer comfortable operations. It can be adjusted from 34" to 46" to meet various height requirements and handle a longer operating radius. Meanwhile, humanized rubber handrails equipped by this device are non-slip and labor-saving..
  • Grinding Everywhere: Are you tired of your grinder lacking the ability to adapt to different surfaces? VEVOR's concrete floor grinder is ideal for grinding rough surfaces on concrete, sto....
Check Stock

Diamond Polishing Pads 4 inch Wet/Dry Set of 11+1 Backer Pad for Granite Concrete Marble Polishing Plus eBook - Polishing Process Best Practices by POLISHSURF

  • 4 inch Diamond Polishing Pad for Marble Granite Quartz Concrete Polishing.
  • Diamond Polishing Kit: 3 x Grit 50 100, 2 x Grit 200, 1 x Grit 400 800 1500 and 1 Velcro Rubber Backing Pad (5/8 - 11 thread).
  • 1 Pc Rubber Hook and Loop Backing Pad designed with water hole for wet polishing as well as dry stone polishing.
  • Concrete Tool Kit for dry/wet polisher at MAX RPM - 5000. Never use with High Speed Grinder.
  • Free eBook: Polishing Process Step by Step and Valuable Polishing Techniques.
Check Stock

Stadea SWP107K Concrete Wet Polishing Angle Grinder 5 Stone Wet Polisher with Diamond Polishing Pads Kit for Concrete Stone Polishing

  • Stadea Wet Angle Grinder, Stone Concrete Polishing Grinder Polisher Countertop Polishing Tools Package kit with Wet polisher, 5" Diamond Polishing....
  • Kit includes Stadea Series Standard A Wet set of seven 5" diamond pads for concrete marble surface polishing and stone granite edge polishing. Also....
  • Ergonomic grip-size, long, out of core, soft back handle design transfers minimal polisher weight to back handle minimizing back hand fatigue and this....
  • In-built water quick-connect to standard water hose, Water pressure control, Water Stopper, Extra-long water line, under-polisher water flow line does....
  • Arbor lock for easy release of tool accessories, Soft-start, Polisher one-push power start & lock switch for ease of use, splash guard with vacuum....
Check Stock

Stadea Diamond Polishing Pad 5" Dry - Concrete Granite Stone Glass Polishing Grit 50, DPPD05SPRA050G1P

  • STADEA 5″ Diamond Dry polishing pad 1 Piece: GRIT 50.
  • Professional Grade 5″ Diameter Dry Diamond Polishing Pad for Granite, Marble, Concrete, Stone, Glass etc polishing.
  • 1.2 MM high, velcro backed and extra flexible to polish contoured (Demi, bullnose etc) or straight surfce.
  • Designed for Dry Polish, Dry pads Works without Wet Polisher, no watery mess, Optimal RPM 1800 Max RPM 3000.
  • Works great on Granite, Concrete, Marble, stones, glass etc. Can be used Wet as well.
Check Stock

Stadea SWP108K Wet Stone Grinder Granite Wet Polisher - 5\ Variable Speed Wet Polisher Grinder Kit with Diamond Granite Polishing Pads

  • Stadea 5” Wet Stone Grinder Polisher with DTM+ motor gear system features enhanced power and optimal speed required for stone granite concrete wet polishing or dry polishing.
  • Stone Granite wet Polisher, Variable dial control to match speed of either stone polishing process, Minimum RPM: 700.
  • Kit Includes Stadea Series Ultra D Wet 5" diamond polishing pads set of 7 pads designed for Granite and hard stones (Quartz) polishing. Also inlcudes 5" semi flexible hook and loop rubber backing pad with 5/8" 11 thread. 7 pieces Granite polishing pads are one each for grits 50, 100, 200, 400, 800, 1500, 3000.
  • Ergonomic grip-size, long, out of core, soft back handle design transfers minimal polisher weight to back handle minimizing back hand fatigue and this along with the innovative head heavy polisher design together transfers machine weight on the stone concrete polishing surface to increase polishing pressure naturally aiding enhanced polishing performance, and minimizes back hand fatigue.
  • Out of body back handle eliminates air vent hand blockage increasing motor performance and durability.
  • In-built water quick-connect to standard water hose, Water pressure control, Water Stopper, Extra-long water line, under-polisher water flow line does no....
Check Stock

Z-LEAP Diamond Hand Polishing Pads Coarse Grit 60 for Granite Marble Concrete Glass Sanding Block

  • ITEM: Z-LEAP Diamond hand sanding block 60# grit (electroplated coarse sanding).
  • SPECIFICATION: Size 90 x 55 / 3.54" x 2.16", Light weight and foam backed, suitable for hand holding.
  • PREMIUM QUALITY: Aggressive and durable diamond abrasive tools, not easy to separation between the sanding surface and the foam, It never leaves dye on the surface of stone during working and has good polishing effciency.
  • APPLICATION: The flat abrasive pads widely used for glass polishing, granite polishing, concrete polishing, marble polishing, terrazzo polishing, engineered stone polishing, travertine polishing, and nearly any other kind of materials surface and edges.
  • USAGE: The polishing pads can be used wet or dry, less harmful dust, and less heat is generated by hand polishing, so no need of coolant.
Check Stock