Top Concrete Forming

Glaze 'N Seal Paver Sealer, 5 Gallon (154)

  • Siloxa-Tek 8500 is a water-based, silane/siloxane engineered to reduce water and moisture intrusion. Will not change the aesthetics, leaving your concrete, pavers, brick and stone with its original natural appearance..
  • This low VOC formula is 100% breathable and non film forming (meaning it will never peel flake or delaminate).Siloxa-Tek 8500 is D.O.T (Department of Transportation) approved and resists surface damage caused by chlorides and deicing salts. It mitigates cracking, spalling and pitting and protects against surface degradation from freeze thaw damage..
  • Siloxa-Tek 8500 is a supercharged penetrating sealer with 6x higher actives than any other water based concrete sealer on the market for long lasting protection that actually last. Resists wind driven rain..
  • Siloxa-Tek 8500 is a commercial grade, impregnating sealer for commercial and residential applications. Its high actives formula is UV stable and will not break down from direct sunlight. There is no change to the surface profile ensuring a non slick surface. Siloxa-Tek 8500 is the next generation of impregnating sealers with smaller active particles for even deeper penetration for unrivaled protection..
  • Excellent water beading effect, easy application with sprayer, roller or brush. Use on ....
Check Stock

DEWALT 20V MAX* XR Rotary Hammer Drill Kit D-Handle 1-Inch DCH133M2

  • Cordless hammer drill has 2.6 Joules of impact energy for fast drilling in concrete..
  • Lightweight design makes this DEWALT 20V hammer drill ideal for forming, rod hanging, structural connections, beam and column anchorage, steel....
  • Brushless motor and durable German-engineered mechanism of DEWALT 20V brushless hammer drill is made for efficient performance and runtime..
  • Rotating dial to set tool to a specific applicaiton mode - Drill, Hammer Drill, or Chip..
Check Stock

DryWay Penetrating Silane & Siloxane Concrete and Masonry Water-Repellent Sealer - Flat Finish/No Slip, Outdoor/Indoor (2.5-Gallons)

  • Penetrating Silane & Siloxane for Concrete, Brick, Block, Pavers, and other Porous Masonry..
  • Non-Film Forming. Clear/Matte Finish. Non-Slip. For Indoor or Outdoor Use.
  • Unbeatable Service Life. Up to 10-Years of Protection..
  • Excellent Water-Repellency. Prevents Damage Caused by Salts and De-Icing Chemicals..
  • For Patios, Driveways, Pool Decks, Garages, Shop Floors, Sidewalks and Walkways.
Check Stock

Kingthai 7 Inch Concrete Turbo Rim Diamond Blade for Masonry Stone, 7/8\-5/8\ Arbor

  • Arbor: 7/8"-5/8" bushing, Rim height .395"(10mm). Size is 7"x.100"x.395"/10mm..
  • Hot-pressed sintered blade: The grain of diamond will not become larger, the density is high and the mechanical property is good. There is no need to add sintering aids or forming aids, so the purity is high..
  • Main features: Turbo continuous rim diamond blade with faster & smoother cutting of hard building materials..
  • Designed for: Brick, block, concrete, masonry and stone etc..
  • Applicable models: Angle grinder, Hand-held power saw, Stone saw, etc..
Check Stock

Kingthai 12 Inch Turbo Continuous Rim Concrete Diamond Saw Blade with 1\Arbor for Masonry Stone

  • Rim height .395"(10mm). Arbor：1". Size is 12"x.110"x.395"/10mm.
  • Hot-pressed sintered blade: The grain of diamond will not become larger, the density is high and the mechanical property is good. There is no need to add sintering aids or forming aids, so the purity is high..
  • Main features: Turbo continuous rim diamond blade with faster & smoother cutting of hard building materials..
  • Designed for: Brick, block, concrete, masonry and stone etc..
  • Applicable models: Angle grinder, Hand-held power saw, Stone saw, etc..
Check Stock

Kingthai 14 Inch Turbo Continuous Rim Concrete Diamond Saw Blade with 1'-20mm Arbor for Masonry Stone

  • Arbor:1"-20 mm bushing, Segment dimension:10*3.2 mm..
  • Hot-pressed sintered blade: The grain of diamond will not become larger, the density is high and the mechanical property is good. There is no need to add sintering aids or forming aids, so the purity is high..
  • Main features: Turbo continuous rim diamond blade with faster & smoother cutting of hard building materials..
  • Designed for: Brick, block, concrete, masonry and stone etc..
  • Applicable models: Angle grinder, Hand-held power saw, Stone saw, etc..
Check Stock

Kingthai 10 Inch Wet Dry Segmented Cutting Concrete Diamond Saw Blade for Masonry with 25.4mm Arbor

  • Arbor: 7/8"-5/8" bushing, Segment Dimension:37.5*10*2.5mm.
  • Hot-pressed sintered blade: The diamond crystal grain is small, the density is high and the mechanical property is good. There is no need to add sintering aids or forming aids, so the purity is high..
  • Main features: The product is 10" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal..
  • Applicable models: Circular saw, Hand-held power saw, Masonry saw, etc..
  • Designed for: Brick, block, concrete, masonry, stone etc..
Check Stock

DEWALT 20V MAX Rotary Hammer, SDS Plus, 1-1/8-Inch, Tool Only (DCH263B)

  • Cordless hammer drill has 3.0 Joules of impact energy for fast drilling in concrete..
  • SHOCKS ACTIVE VIBRATION CONTROL System of DEWALT 20V hammer drill reduces vibration felt by the user at the handles, compared to rotary hammers without this feature..
  • Lightweight design makes this DEWALT 20V brushless hammer drill ideal for forming, #3 to #5 post installed rebar dowelling, tilt wall support, rod hanging, beam & column anchorage, and steel stanchion mounting..
  • OSHA Table 1 Compliant when paired with DWH205DH On Board Extractor..
  • Brushless motor and durable German-engineered mechanism for efficient performance and runtime..
  • Rotating Dial to set tool to a specific applicaiton mode - Drill, Hammer Drill, or Chip..
Check Stock

DryWay Water-Repellent Concrete Sealer - Penetrating Silane & Siloxane for Driveways Garages Patios Pool Decks Concrete Brick & Pavers Flat Finish Interior/Exterior 5-Gallons

  • Water-Based Silane & Siloxane for Concrete, Brick, Block, Pavers, and other Porous Masonry..
  • Non-Film Forming. Clear/Matte Finish. Non-Slip. For Indoor or Outdoor Use.
  • Unbeatable Service Life. Up to 7-Years of Protection..
  • Excellent Water-Repellency. Prevents Damage Caused by Salts and De-Icing Chemicals..
  • For Patios, Driveways, Pool Decks, Garages, Shop Floors, Sidewalks and Walkways.
Check Stock

LukLoy 4X 304 Stainless Steel Square Glass Spigots Pool Fence Spigot Clamp Home Garden Stairs Balustrade Railing Balcony Glass Floor Clamp (4 Pieces x 960g Brush)

  • Perfect for glass swimming pool, glass garden, balustrade, staircase and so on.
  • Through integral cast forming, our spigots has the advantages of high strength and safety.
  • Suitable for glass thickness 8mm, 10mm, 12mm, 15mm or 5/16 inch, 3/8 inch, 1/2 inch, 9/16 inch tempered glass panels.
  • Easy installation - DIY focused. Include the cover and concrete floor screws..
Check Stock

Kingthai 7 Inch Wet Dry Segmented Cutting Concrete Diamond Saw Blade for Masonry with 7/8-5/8 Inch Arbor

  • Arbor: 7/8"-5/8" bushing, Segment height .395"(10mm). Size is 7"x.090"x.395"/10mm..
  • Hot-pressed sintered blade: The grain of diamond will not become larger, the density is high and the mechanical property is good. There is no need to add sintering aids or forming aids, so the purity is high..
  • Main features: The product is 7" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal..
  • Designed for: Brick, block, concrete, masonry, stone etc..
  • Applicable models: Angle grinder, Circular saw, Hand-held power saw, Masonry saw, etc..
Check Stock

Wall Line Cutter Wire Slotting Marble Concrete Cutting Machine - Dustproof And Infrared Sighting - AC 110V

  • Faster forming speed: adjustable width and depth for quick and easy..
  • One-shot molding, stable and precise: the wall slotting machine is equipped with infrared rays and rollers. When working, it uses the roller to....
  • Easy to hold: weight 6.5kg, the handle can be rotated 180 ° left and right, to achieve a person without assistants can also work effort, increase the....
  • Safety: All high-power copper machines, power supply voltage 110v, load up to 4000w, , and the machine is not burned.
  • Multi-purpose use: wall slot machine can cut concrete, marble, granite, lightweight bricks and other materials, can also be used for wall wire line....
Check Stock