Top Concrete Masonry Unit

Thoro T1180 Gry Seal Foundation Coating, 50 lb

  • Waterproofs exterior below grade concrete or masonry.
  • Apply with a push broom or a 6” masonry Brush.
  • Cleans up with soap and water immediately after use. Recommended for: Concrete, masonry, basement walls, foundation and retaining walls. Coverage: Base Coat: 225 square feet at 1/16 IN dry-film thickness.
  • Top Coat: 450 square feet at 1/32 IN dry-film thickness. Coverage will vary depending on surface texture and porosity.
Check Stock

14\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry 12mm Segment Height

  • MULTIPURPOSE - 14" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind..
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone. Not recommended for reinforced concrete and asphalt and green concrete..
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock

DEWALT D25810K SDS MAX Chipping Hammer 12lb

  • 7.1 j's of impact energy provides the power for chiseling work on concrete and masonry walls..
  • SHOCKS - active vibration control reduces vibration felt by the user at the handles. A perform and protect feature..
  • Optimized Mechanism and Motor system to provide fast chiseling work on concrete and masonry walls, plaster and tiles, walls and floors, concrete....
  • Low vibe side handle for comfort during extended working intervals.
Check Stock

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
  • Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry..
  • PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements..
  • PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete..
  • PC-Concrete is the best solution for permanent concrete repair..
Check Stock

Dremel US410-01 Ultra-Saw 4-Inch Diamond Surface Prep Abrasive Wheel , Green

  • Diamond chip technology for high performance surface preparation..
  • Ideal applications include concrete, tile, brick, masonry and cement..
  • Accessory is compatible with all Dremel corded and cordless Ultra Saw tools..
  • Quickly smooth bumps and cracks in concrete before finishing and to remove thinset mortar for tile remodeling..
  • Use your Ultra-Saw for concrete, masonry and tile surface preparation.
Check Stock

Sabre Tools 1/4 Inch x 6 Inch Masonry Drill Bit, Carbide Tipped 5-Pack for Concrete, Brick, Stone, 1/4” Hex Shank, Impact Performance (1/4” x 6”, 5)

  • 1/4” x 4” x 6" Masonry hammer drill bits 5 pack set – Ideal for use with Tapcon concrete screws.
  • 1/4” Hex Shank Masonry Bit Set – Can be used with impact drivers and regular screw guns for added non-slip ability.
  • High quality masonry drill bits designed to work in.
  • Bit features U-flute with self-centering carbide tip, ensuring fast cut speeds and MAXIMUM life.
  • Our concrete drill bits have an optimized design, allowing material to quickly move out of the hole while bit remains cool.
Check Stock

Sabre Tools 3/16 Inch x 6 Inch Masonry Drill Bit, Carbide Tipped 10-Pack for Concrete, Brick, Stone, 1/4” Hex Shank, Impact Performance (3/16” x 6”, 10)

  • 3/16” x 4” x 6" Masonry hammer drill bits 10 pack set – Ideal for use with Tapcon concrete screws.
  • 1/4” Hex Shank Masonry Bit Set – Can be used with impact drivers and regular screw guns for added non-slip ability.
  • High quality masonry drill bits designed to work in.
  • Bit features U-flute with self-centering carbide tip, ensuring fast cut speeds and MAXIMUM life.
  • Our concrete drill bits have an optimized design, allowing material to quickly move out of the hole while bit remains cool.
Check Stock

4 Pcs SDS Plus Chisel Hammer Drill Bits, Rotary Concrete Hammer Bits Set includuing Gouge Chisel, Flat Chisel, Point Chisel and Wide Chisel

  • Made of high-grade forged and heat treated steel for maximum durability..
  • 4 kinds concrete chisels break or drill a wall, concrete, stone or other materials, satisfy all your different concrete or masonry working or renovation needs..
  • Elbow chisels are mainly used for the removal of walls, tiles and cement, while other chisels can be used for the removal and drilling of concrete, brick, masonry and granite..
  • Concrete chisel set 4 in 1 including flat chisels, point chisel and groove chisel..
Check Stock

M10 x 80mm External Hex Expansion Bolts Screws, Hex Head Sleeve Anchor, 304 Stainless Steel, 4Pcs

  • M10 x 80mm Expansion Bolts, Thread Diameter: 10mm/ 0.4'', Expansion Tube Diameter: 12mm/ 0.47'', Total Length: 80mm/ 3.14''..
  • Made of 304 stainless steel, durable and rust resistant..
  • Concrete and masonry anchors, easy to install..
  • Used for heavy duty fixing of concrete masonry and solid masonry, ceiling and expansion sleeve anchor bolts..
  • Package Included: 4Pcs M10 x 80 expansion bolts..
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....
Check Stock

Protimeter BLD8800-S MMS2 Basic Survey Kit Moisture Meter with Pouch

  • Measures moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry and other building materials.
  • Measure (pin mode) diagnoses the extent of moisture intrusion for damage assessment and monitor drying out of building structures.
  • Search (non-invasive mode) behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block.
  • Hygrometry measures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems.
  • This Package Includes: MMS2 Instrument, Short Humidity Quickstick, Hygrostick Humidity Probe, Quickstick External Lead, Heavy Duty Moisture Probe, Deep Wall Probe (5″), Calibration Check Device, Instructions, Software And Cable, Soft Carry Pouch.
Check Stock

1/4 Tapcon Style Concrete Screws Slotted Hex Washer Head Concrete Screws to Anchor Masonry Block & Brick 1/4 x 1-3/4 Qty 1000

  • Slotted Hex Washer Head Masonry Screws - 1/4 inch Diameter.
  • Commonly used to anchor fixtures to brick, block or concrete.
  • Blue Climaseal Coating for Corrosion Resistance & Durability.
  • Cuts its own threads into concrete and other masonry materials.
  • Does not include masonry bit for pilot hole.
Check Stock