Top Concrete Mounting Bolt
TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 10
- Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
- Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
- Made in USA, and includes 3/16"-24 UNC-threaded bolts.
- Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check StockTOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 10
- Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
- Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
- Made in USA, and includes 1/4"-20 UNC-threaded bolts.
- Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check StockCONFAST 3/8\ Lag Shield Anchor Long (12 per Box)
- Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration.
- Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place.
- Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications.
- Ultimate tensile strength is 1,190 lb. in 2,000-psi concrete.
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check StockTOGGLER SNAPTOGGLE BA Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 100 anchor with out bolts
- Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
- Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
- Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
- Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check StockArrested Development
- STRONG FIXED ABILITY - Our concrete wall anchors are made of high quailty plastic. Combined with lag bolt sturdily on the concrete or brick wall..
- WIDE APPLICATION - Need to mount your TV on concrete or brick wall but no anchors? Our anchors for concrete or brick wall can help you..
- EASY INSTALLATION - With the corresponding hole in the wall, it is easy to hammer the anchor bolt into the wall..
- BASIC INFORMATION - Rod Diameter: 10mm/3/8”, Total length: 50mm/2”. Package Content: 6 pcs concrete wall anchors in one pack..
- WORLD-CLASS CUSTOMER SERVICE - Our customer service team is glad to provide support on pre-purchase or installation problems for customers at any time..
Check StockArchitectural Mailboxes® 5106W Surface Mount Mailbox Post, White
- Constructed from heavy gauge galvanized steel with a commercial grade powder coated finish for durability.
- Designed to be mounted to a concrete pad.
- 4 in. x 10 in. mailbox mounting bolt pattern.
Check StockArchitectural Mailboxes® 5106B Surface Mount Mailbox Post, Black
- Constructed from heavy gauge galvanized steel with a commercial grade powder coated finish for durability.
- Designed to be mounted to a concrete pad.
- 4 in. x 10 in. mailbox mounting bolt pattern.
Check StockBoltHold - SP58 Zinc-Plated Asphalt Anchor 1-1/4 x 10 - with 1.5 Hex Bolt & 2 Washer - Chemical Anchors - for Installation of Sheds Carports Bike Racks & More - 5000 lb Pull Rated - 6 PK
- ZINC-PLATED ASPHALT ANCHORS: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. Measuring 10" long, these SP58 Zinc-Plated Steel Anchors incorporate a 5/8"-11 UNC (coarse) female thread and are pre-installed with a 1.5" long bolt and a 2" diameter washer. Set includes 6 anchors..
- OUR STRONGEST ANCHOR: Pull rated for 5000 lb! Designed for a very heavy load, BoltHold SP58 chemical anchors resist at least 5,000 pounds pull and 2,500 pounds of high shear force at ground level. Rated for >720 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
- LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing....
Check StockBoltHold - AK-4 Asphalt Anchor & Anchoring Cement Kit - Four 1500lb Pull Rated SP10-38 Chemical Anchors 5/8 x 6 with EPX2 Anchoring Cement - For Installation of Sheds Carports Bike Racks & More
- ASPHALT ANCHORING KIT: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors and anchoring grout allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout..
- LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
- LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installi....
Check StockBISupply Parking Bollard 42in Street Bollard Parking Post, Metal Sign Posts Steel Safety Bollard Traffic Pole
- Black and yellow reflective tape wraps around top of road sign post for increased visibility at night.
- Powder-coating also protects traffic barriers parking posts from oxidation, UV rays, and harsh weather conditions.
- [Easy to Install]: Steel bollards can be bolted to various materials including concrete or can be buried in freshly-poured concrete.
- 7/8 by 1-1/4 inch (2.2 by 3.2 cm) pre-drilled bolt holes make mounting easy.
- Plastic molded cap is removable to allow you to fill traffic post stand with concrete or sand.
- [Use Anywhere]: Security bollard safety post can be used outside or indoors to control traffic and to block important objects from impact damage.
- Perfect for use in warehouses to prevent damage to utility and electrical machinery caused from forklifts and pallet trucks.
Check StockConcrete Wall Anchors for TV Wall Mount Installation Suitable for Concrete Wall or Brick Wall Installation Plastic Anchor Bolts 10x50mm White 6pcs MD5751 by Mounting Dream
- STRONG FIXED ABILITY - Our concrete wall anchors are made of high quailty plastic. Combined with lag bolt sturdily on the concrete or brick wall..
- WIDE APPLICATION - Need to mount your TV on concrete or brick wall but no anchors? Our anchors for concrete or brick wall can help you..
- EASY INSTALLATION - With the corresponding hole in the wall, it is easy to hammer the anchor bolt into the wall..
- BASIC INFORMATION - Rod Diameter: 10mm/3/8”, Total length: 50mm/2”. Package Content: 6 pcs concrete wall anchors in one pack..
- WORLD-CLASS CUSTOMER SERVICE - Our customer service team is glad to provide support on pre-purchase or installation problems for customers at any time..
Check Stock3/8\ X 3-3/4\ Stainless Wedge Anchor (10pc), 18-8 Stainless Steel
- 【High Quality Stainless Steel】Bolt Dropper Wedge Anchors are 100% 18-8 (304) Stainless Steel giving them one of the highest forms of corrosion resistance. This makes them the perfect choice for use in any environment (including marine/saltwater)..
- 【Anchors You Can Depend On】Our concrete anchors are very strong and are great for both indoor and outdoor use. Whether you are attaching a boat lift to a seawall or securing a safe to concrete in your garage, you can depend on Bolt Dropper wedge anchors to hold..
- 【Great To Keep Around】Bolt Dropper wedge anchors are great to have around for when you need them most! Use in any application, any condition and any environment! Bolt Dropper anchors are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and long lasting!.
- 【Dimensions】Diameter: 3/8" | Length: 3-3/4" | Thread Type: Coarse (standard) | Quantity: 10 pcs | Material: 18-8 (304)Stainless Steel..
- 【Lifetime Guarantee】We are so confident that our product is the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock