Top Concrete Repair Epoxy

Metal bonding Repair Paste, Super Glue Gel Paste(A+B), Filler, Adhesive for Cast Iron, Radiator Cold Weld high Heat Resistant Glue, Industrial (80 Gram), (PASAWA 1001)

  • ... strong and stable permanent bond. Compared with traditional epoxy, AB epoxy glue is high adhesion and good hardness, and a certain toughness..
  • Wide Application: Our metal repair glue is suitable for repairing bonding metals, ceramics, glass, and many plastics. It not only can be used to repair fuel tanks, plumbing, concrete breaks, water tank, and plastic bucket but can be used for boats, cars, fuel tanks, heaters, vases, fence welding car bumpers, and motorcycle crack repair..
  • Safe and Clean: Our epoxy resin is a clean, odorless, and environmentally friendly product, 100% safe. We insist on the production of exclusive metal glue formula, which has passed MSDS, SGS, and various safety reports. We take environmental protection as the concept, to ensure that your repaired products are safe and clean..
  • Simple to Use: The way to use super glue is very simple. First, please make the surface clean before the process. Then, use the pusher to push out the appropriate amount of glue at a 1:1 ratio on a flat surface, and use the stirrer to mix it evenly (usually 5 minutes, if not, it will affect the bonding effect). Last, apply it to the surface and give it 24 hours for full curing..
  • 100% Refund Guarantee: We are very confident in the quality of our plastic glue.....
Check Stock

PC Products PC-Marine Epoxy Putty, 2oz Stick, White (25567)

  • Epoxy putty stick for rapid repairs to wet or dry surfaces.
  • return to service in less than 60 minutes.
  • bonds to tile, fiberglass, concrete, gunite, grout, PVC, wood and various metals.
  • Repair boats, spas, swimming pools, shower basins, stock tanks, copper and PVC pipes.
  • Two-part white epoxy putty for rapid marine, pool, and plumbing repairs on wet, dry, and underwater surfaces.
  • Hand moldable without need for mixing or application tools.
Check Stock

TotalBoat Underwater Repair Epoxy 2-Gallon

  • Versatile, 2-part epoxy repair compound for filling voids, patching holes, and sealing leaks in aluminum, fiberglass, wood, steel, and concrete hulls....
  • Super-sticky putty is ideal for emergency repairs due to water intrusion to help your boat stay afloat.
  • Can be mixed, applied, and cured underwater, and even while underway.
  • becomes completely hard and ready to machine, tap, or drill in 6-8 hours (cure time is temperature....
  • For interior and exterior use above, at, or below the waterline to fix damage on wood, concrete and metals. Available in three convenient sizes to....
Check Stock

50 ft - Carbon Fiber-Basement Wall Crack Repair Kit - Carbon Fiber Foundation Wall Repair - Easy to use Includes Instructions

  • 50 FT. X 4 in wide Carbon Fiber crack repair fabric-12K Tow.
  • 48 oz. High Strength Epoxy Resin - 48 oz Hardener.
  • Easy to install-requires minimal experience.
  • Strong adhesion to concrete block or poured concrete wall.
Check Stock

Metal Repair Glue, Glue for Metal to Metal, Liquid Metal Glue, Heat Resistant Glue for Metal, Appliances Casting Metal Repair Paste, ab Glue for Radiator Pipe Tank Repair Metal Filler- 65 Gram

  • ...ecifically design heat resistant epoxy sustain it properties at elevated temperature upto 150 degree celcius..
  • ⭐Wide-range of applications:- This cold welding liquid can used as metal to metal glue, casting appliance, equally applicable to other surfaces such as wood and concrete. common application as small hole repair in metal , metal to metal adhesive, liquid metal filler, radiator repair and pipe repair..
  • ⭐Instruction:- mix the 2 part epoxy metal glue equally, apply to clean surface and give it 12- 24 hours for full curing before Appling any load. for further instruction follow the instruction sheet inside the box..
  • ⭐long-lasting Bond Strength: forms a strong and stable permanent bond that should last for ages. Once cured, Metal cast iron magic repair glue forms a strong and stable permanent bond, which should be used for many years. can be shaped, tapped, filed, sanded and drilled depending on its purpose..
Check Stock

Metal Repair Glue, 2 Pack Professional Grade Metal to Metal Glue Heavy Duty for Metal, Plastics and Ceramics, High-Temperature Heat Resistant Epoxy Glue for Welding Steel, Aluminum, and DIY Craft

  • ...with traditional epoxy, AB epoxy glue is high adhesion and good hardness, and a certain toughness..
  • WIDE APPLICATION: Our metal repair glue is suitable for repairing bonding metals, ceramics, glass, and many plastics. It not only can be used to repair fuel tanks, plumbing, concrete breaks, water tank, and plastic bucket but can be used for boats, cars, fuel tanks, heaters, vases, fence welding car bumpers, and motorcycle crack repair..
  • SAFE AND CLEAN: Our metal to metal glue is a clean, odorless, and environmentally friendly product, 100% safe. We insist on the production of exclusive metal glue formula, which has passed MSDS, SGS, and various safety reports. We take environmental protection as the concept, to ensure that your repaired products are safe and clean..
  • SIMPLE TO USE: The way to use our metal glue heavy duty is very simple. First, please make the surface clean before the process. Then, Use the pusher to push out the appropriate amount of glue at a 1:1 ratio on a flat surface, and use the stirrer to mix it evenly (usually 5 minutes, if not, it will affect the bonding effect). Last, apply it to the surface and giv....
Check Stock

Simpson Strong Tie ETIPAC10KT CRACK-PAC Injection Epoxy

  • low viscosity crack injection epoxy designed to repair cracks in concrete.
  • The low surface tension allows the product to penetrate fine to medium width cracks.
Check Stock

J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black 25 ml

  • J-B WELD KWIKWELD: A fast setting version of The Original Cold Weld two part epoxy system that provides strong, lasting repairs to multiple surfaces....
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, KwikWeld takes 6 minutes to set and 4-6 hours to....
  • STRENGTH: J-B Weld KwikWeld has tensile strength of 3127 PSI.
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld....
Check Stock

J-B Weld KwikWeld, 6 Minute Set Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8276-2)

  • J-B Weld Kwikweld: A Fast Setting Version Of The Original Cold Weld Two-Part Epoxy System That Provides Strong, Lasting Repairs To Multiple Surfaces. Perfect For Diy Household, Automotive, Marine, Craft Repair And Much More.
  • Cure And Set Time: After Mixing The Tubes At A 1: 1 Ratio, It Takes 6 Minutes To Set And 4-6 Hours To Cure. Once Cured, Kwikweld Can Be Tapped, Filled, Sanded, Molded And Drilled. Kwikweld’s Set And Cure Color Is Dark Grey..
  • Versatile And Dependable: J-B Weld Kwikweld Is Steel Reinforced, Has A Tensile Strength Of 3127 PSI And Can Withstand Temperatures Up To 230 Degrees Fahrenheit (110 Degrees Celsius). When Fully Cured, Kwikweld Is Waterproof And Resistant To Petroleum, Chemical And Acid..
  • Surface Applications: Metal, Plastic & Pvc, Wood, Concrete, Ceramic & Tile, Fiberglass And More.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld 43032 UltraRez UV Resistant Resin, Epoxy Resin, Art Resin, Crystal Clear Non- Yellowing, 32 fl. Oz. Kit, Clear

  • ★ QUICK SET EPOXY: A 2-part epoxy resin system with accelerated drying properties. This fast set epoxy is ideal for anyone requiring a wood or concrete epoxy resin sealer with a shorter working time, drying time, and curing time.
  • ★ QUICK 2-3 HR EPOXY CURE: Considered the BEST 2-3 hour fast drying epoxy on the market. Apply to river tables, live edge wood slabs, epoxy countertops, and epoxy bar tops to prevent air bubbles.
  • ★ FILL CRACKS FAST: Pour epoxy into river table cracks and voids to quickly seal and fill. Use this quick drying resin as clear cast epoxy or excellent for colored cracks and veins in wood or concrete - 12-15 minute pot-life.
  • ★ COLOR CRACKS & VOIDS: Tint with epoxy resin mica powders, epoxy alcohol inks or liquid epoxy pigments to make beautiful epoxy accents to enhance a deep pour wood river table or countertop.
  • ★ MADE IN THE USA: We are the manufacturer and understand epoxy! Quick Set Seal epoxy has 100% Solids, Low Odor, Zero VOC, Quick Curing 1:1 Mix Ratio, 1 Quart 2 Part Epoxy Resin Kit.
Check Stock

J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml 2

  • J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch....
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be....
  • VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check Stock