Top Concrete Smoothing Tool

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

TOMAHAWK 37.7cc Gas Concrete Power Screed Cement Finishing Vibrating Motor with 10ft Aluminum Board Straight Edge Bar Vibra Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes hardened aluminum 10’ board float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

6 Pieces Paracord Stitching Set Paracord FID Lacing Stitching Needles Paracord Smoothing Tool, 6 Sizes and Silvery

  • Durable to use: the material is stainless steel needles, durable and sturdy, not easy to get erode and rust, lightweight size easy for you to carry, which can provide a long use time to you.
  • Various sizes: there are 3 different sizes of round head needles, with a flat head needle, all are 7.8 cm/ 3 inches in length, big eye needle is 6.8 cm/ 2.67 inches in length, 2 mm in diameter, suitable for twine under 1.5 mm, provide many types and sizes of paracord works.
  • Where to use it: it is suitable for paracord bracelets and other paracord works, also can be applied to diy your crafts, essential products for your paracord, these threading needles quite useful, make your projects quick and easier.
  • Package quantity: we have 3 pieces paracord lacing needles in 3 different sizes, 1 x flat head paracord needle, 1 x round head needle and 1 x paracord smoothing tool, with a velvet bag, needles and smoothing tool are in silvery color.
  • Paracord smoothing tool: use this tool to smooth out the burnt ends of your bracelet upon completion, it is a bit more handy than having to deal with a knife or other tools, the design is quite simple with the flat head, it is a nice addition to have in the paracord tool.
Check Stock

Hyde Series 45808 10\ Wallcovering Smoothing Tool

  • Hyde 45808 10 inch wallcovering smoothing tool.
  • Smoothing tool, 10 inch UPC: 079423458088.
  • Use to smooth wallcoverings and other materials.
Check Stock

CS Unitec EBS 180 F 7" Concrete Floor Grinder with Dust Extraction and Angle Adjustable Floor Guide, 20 Amp, 110V

  • The EBS 180 F concrete floor grinder is ideal for grinding and smoothing concrete, screed, tile adhesive, paint and other coatings.
  • Height-adjustable handle for operator comfort.
  • Foldable front edge of dust guard – for grinding directly to the edge.
  • Brush rim for collecting dust when connected to a dust extraction vacuum.
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

SHDIATOOL Diamond Granite Cutting Wheel for Marble Quartz 4 Inch Fast Cutting Grinding Shaping Diamond Disc for Angle Grinder with 5/8-Inch-11 Thread

  • 4-Inch Premium Quality Double Sided Vacuum Brazed Diamond Cutting & Grinding Disc.
  • Diameter 4"/100MM, 5/8-11 Flange, Thickness 2.4-2.5MM, Diamond Grit #40/50..
  • Widely used for profiling edges, smoothing out inside sinkhole cuts, and smoothing..
  • Very good for removing deep scratches from stone, prior polishing..
  • Widely used for removing coating on concrete floors..
Check Stock

Ruisita 7 Pack Stainless Steel Paracord FID Set Paracord Lacing Stitching Needles and Smoothing Tool with Clear Storage Box for Laces Strings Leather Weaving and Paracord Bracelet

  • Package includes: each pack contains 5 pieces of paracord FID of 3 sizes, 1 piece of large eye blunt needle and 1 fine polished paracord smoothing tool, they are within a clear mini storage box.
  • after using you can put the tools inside to keep them orderly and neatly.
  • Material and size: made of high quality stainless steel, 4 pieces of paracord FID are in length of 78mm/3.07inches, their outer diameters are 3mm/5mm/5mm/6mm respectively, the other 1 is 90mm/3.54 inches long, and with the outer diameter of 5mm.
  • the needle is 70mm long/2.76inches, smoothing tool is 122mm long/4.8 inches, they are for different uses.
  • Scope of application: needles of different sizes, lengths and shapes can be adapted to most of your laces, strings or other materials and other requirements, they can be used for paracord bracelet and leather weaving as well as other DIY handicrafts and accessories and can give a full play to your creativity.
  • The paracord FID and paracord smoothing tool set with hard texture is finely made, easy to use, lightweight and durable, the surface is polished, rust-proof, corrosion-resistant and colorfast, and can be used repeatedly for a long time.
  • Convenient and portable: all the paracord FID, needle, smoothing tool are kept in the tranparent box with....
Check Stock

Goldblatt 4" x 10" Grout Float - Extra Clean Rubber Grout Float, Floor & Tile Urethane Grout Tools with Soft-Grip Handle for Masonry, Concrete, Stucco, Drywall

  • ...squared-off back corners is suitable for dealing with corners and allow for complete grout coverage.
  • Bottom pad measure: 10-1/2 inch by 4-inch.
  • Professional Grade - Goldblatt Red Grout Float (G02763AE) is used to spread grout into the joints when grouting ceramic tile. Suitable for finishing or smoothing drywall compound, stucco, textured tiles and natural stone, sanded and non-sanded grout, concrete or grout of wall and floor.
  • Goldblatt Soft-Grip Handles - Ergonomic Soft-grip non-slip handles with non-slip during use and makes grout work effortlessly. The firmly installed handle can withstand 26.5 lbs (12 kg) tension for 1 minute without falling off.
  • Goldblatt Guarantee - We proudly stand behind the quality of our products. If any Goldblatt hand tool fails to deliver professional results, you can return it for a full refund. No questions. No hassles. Just honest business. Goldblatt provides high-quality tools and products for concrete, masonry, tile, drywall, and paintwork. We firmly believe that tradespeople deserve the best tools for building, and that these tools should be fair and affordable.
Check Stock

SHDIATOOL 4-1/2 Inch Diamond Cutting Grinding Disc Fits 5/8-11 Arbor for Marble Ceramic Double Sided Vacuum Brazed Fast Cutting Shaping Grinding Wheel …

  • 4.5-Inch Premium Quality Double Sided Vacuum Brazed Diamond Cutting & Grinding Disc.
  • 4.5" (115mm) diameter, 5/8-11 flange, 2.4-2.5mm thickness, #40/50 diamond grit..
  • Versatile and aggressive for quickly cutting, shaping and grinding stone, marble, granite, concrete..
  • Widely used for profiling edges, smoothing inside cutouts of sinks, and smoothing..
  • Very good for removing deep scratches from the stone, after polishing..
Check Stock

WOODPECKER ST64 Pneumatic Concrete T Nailer, 14 Gauge 3/4" to 2-1/2" Heavy Duty Air Concrete Nail Gun for Furring Strips, Masonry, Cement, Concrete Brick Nailing

  • 【Lightweight Construction & Same Function】Die-cast aluminum housing reduces device weight and ensures the tool's durability. Net weight is 4.7LBS (2.11KG). This model is smaller & lighter than ST64 Concrete T Nailer while keeping the same functions and applications. ** If nails are not demanded over 1-1/2'' (38mm) length, this tool is recommended **.
  • 【Safer in Use】A easy-switch safety lock is designed for considering fewer injuries caused by accidental shooting. Turn up is to lock and down is to release.
  • 【User-Friendly Design】Magnetic Nose allows you to secure metal steel sheets without touching.
  • The Spacious Slide-Loading Magazine is for easy loading and automatically adjusts nails length.
  • Comfort Rubber Grip helps eliminates operating fatigue.
  • 【Drives 14 Gauge Concrete Nails】Uses 14 Gauge 3/4-inch to 1-1/2-inch (18-38mm) length concrete T nails. ** Comes with 400PCS 3/4-inch (18mm) Concrete Nails For Free**.
  • 【Practical Application】Ideal tool for doing some soft masonry standard concrete nailing jobs like brick wall foundations, nailing b....
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock