Top Concrete Spraying Equipment

Fast Setting Concrete Mix, Pail, 50 lb.

  • HIGH-QUALITY - At cretebeater, we manufacturer biodegradable concrete dissolver. It is non-corrosive and free from muriatic acid..
  • MULTI-PURPOSE - This concrete and mortar dissolver can be quickly and safely used on Aluminium, Plastic, Rubber, Glass, Painted surfaces. No nasty smell from the product..
  • EASY & SAFER TO USE - It is effortless to use. Apply a layer of cement remover foam that adequately covers the surface. Infuse for 20, 30 minutes, and wash it with pressure water..
  • QUICK & EFFICIENT - It efficiently removes cement and concrete, grout, secretes, mortar cement, etc., in just 20-30 minutes..
  • PROFESSIONAL EQUIPMENT - A priority choice for concrete drain, used by the professional industry for more than a decade..
Check Stock

Chapin International - 19069 3.5-Gallon Stainless Steel Handheld Sprayer

  • 3.5-Gallon Tri-Poxy tank for durability and a 4-inch wide mouth opening for easy filling and cleaning.
  • Compatible for most professional concrete applications and extreme chemicals including Acetone, Naphtha, Xylene and Toluene (check chemical manufacturers instructions).
  • Brass pump, wand, nozzle and shut off with lock on feature for continuous spraying.
  • Chemical resistant seals and gaskets designed to handle a variety of chemicals.
  • Unique Tri-Lock seal feature that locks the pump cap tight.
Check Stock

Aimela110 °Fan Shaped Nozzle, 110 Degree Fan-shaped Flat Bottom, 0.15-0.4mm Aperture, Suitable for Knapsack Sprayer, Garden spray, Agricultural Greenhouse Spray Equipment, etc., Used for weeding.

  • It contains four 110 degree nozzles of different sizes: 110-1.5110-2.0110-3.0110-4.0, which can switch four spraying modes, and the spraying fan-shaped area presents different ranges.
  • It can be used with 3 types of magic wand, and is suitable for most garden lawn backpack sprayers. It is suitable for spray cleaning, cooling and dedusting of large scale agricultural equipment for agricultural industry, and is suitablefor most spray and spray equipment in the market..
  • It contains two transfer interfaces, which can transfer two types of magic wand interfaces: 14 * 1.5mm inner tooth interface and 18 * 1.5mm outer tooth interface.
  • Please check the installation size of the nozzle before purchase. If you have any questions, please feel free to contact us. Serve you wholeheartedly..
Check Stock

VEVOR Vari-Grind System, 24' Length of V-arm Vari-Grind Attachment, 3' x 5' x 1/4' Platform Grinding Jig, Fit for 0.63' Bowl Gouge Vari-Grind Jig for the Wolverine Sharpening System

  • Protective Washers: The vari-grind jig is equipped with scratches resistance equipment. A plastic washer is added to the metal inside the support to fix the rod to avoid friction with the rod that needs to be processed and thus damage the machine and items..
  • Widened Aperture: The aperture has been widened. The dimensions of the grinding jig are accurate. The diameter of the inlet and outlet holes is 0.7" / 18 mm, the distance between the inlet and outlet holes is 2.5" / 64 mm. Suitable for the diameter of the gouges is 0.6" / 16 mm..
  • Black Coating Surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. Powder spraying is superior to spray paint in mechanical strength, adhesion, corrosion resistance, and aging resistance..
  • Complete Component: 6-piece set: A fish board ruler, two knife grinding support bases, two side supports, and an angle working bracket. By mounting one under each wheel, grinding operations can be rapidly performed on either side of your grinder without re-position bases..
  • Wide Application: The lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished. It is designed to be used with the wolverine grinding j....
Check Stock

VEVOR Vari-Grind System, 24' Length of V-arm Vari-Grind Attachment, 3' x 5' x 1/4' Platform Grinding Jig, Fit for 0.63' Bowl Gouge Vari-Grind Jig for the Wolverine Sharpening System

  • Protective Washers: The vari-grind jig is equipped with scratches resistance equipment. A plastic washer is added to the metal inside the support to fix the rod to avoid friction with the rod that needs to be processed and thus damage the machine and items..
  • Widened Aperture: The aperture has been widened. The dimensions of the grinding jig are accurate. The diameter of the inlet and outlet holes is 0.7" / 18 mm, the distance between the inlet and outlet holes is 2.5" / 64 mm. Suitable for the diameter of the gouges is 0.6" / 16 mm..
  • Black Coating Surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. Powder spraying is superior to spray paint in mechanical strength, adhesion, corrosion resistance, and aging resistance..
  • Complete Component: 6-piece set: A fish board ruler, two knife grinding support bases, two side supports, and an angle working bracket. By mounting one under each wheel, grinding operations can be rapidly performed on either side of your grinder without re-position bases..
  • Wide Application: The lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished. It is designed to be used with the wolverine grinding j....
Check Stock

Stark USA KIT61041 Cement Trowel 22" w/Float Pan 6.5hp 196cc Gas Engine Walk Behind Concrete Surface Finisher Epa

  • For maximum flexibility, engine type, trowel diameter and handle type can be selected to meet individual preferences or job site conditions.
  • Power Trowel is an equipment used for most areas of concrete straightening. It's an extra-strong machine, designed to allow a perfect finish of the concrete.
  • Powered by a 6.5 HP Loncin G200FA motor equipped with four blades that finish off the concrete slabs with ease. Created with industrial grade material that can withstand heavy use and provide you excellent finishing on concrete.
  • Walk-Behind Trowel is an easy to use machine while finishing off the concrete that you have poured. Reducing the manual labor with this device you can cover more ground in the same given time on a job.
  • With the included float plan, push down imperfections and prepare the surface the final concrete finishing.
Check Stock

12V 60W Vacuum Transfer Pump Extractor Oil Fluid Diesel Electric Siphon with Hose for Car Boat Motorbike

  • 5L oil liquid suction pump extractor,Small size, easy to carry and storage.
  • Maximum Pressure: Max. 0.8MPA，Maximum Flow: 5L/min, Rated Power: 60W, Rated Voltage: DC 12V.
  • Pump Diameter: Approx. 4.8cm, Cable Length: Approx. 30cm, Clips Length: Approx. 8cm.
  • Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries.
  • Pls use when the engine is warm,the engine oil is warm and viscosity is lower,this will be easier and faster to pump.
Check Stock

VEVOR Vari-Grind Jig, 3/4' Diameter of the Hole Vari-Grind Attachment, Fit for 0.63' Bowl Gouges Grinding Jig with Vari-Grind, Large Hole Vari-Grind Attachment for the Wolverine Sharpening System

  • Protective Washers: The vari-grind jig is equipped with scratches resistance equipment. A plastic washer is added to the metal inside the support to fix the rod to avoid friction with the rod that needs to be processed and thus damage the machine and items..
  • Widened Aperture: The aperture has been widened. The dimensions of the grinding jig are accurate. The diameter of the inlet and outlet holes is 0.7" / 18 mm, the distance between the inlet and outlet holes is 2.5" / 64 mm.
  • suitable for the diameter of the gouges is 0.6" / 16 mm..
  • Black Coating Surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. Powder spraying is superior to spray paint in mechanical strength, adhesion, corrosion resistance, and aging resistance..
  • Easy to Install: The vari-grind side grinding jig is integrated for effortless installation. We will provide a hexagonal handle that can be installed by hand. Put the rod that needs to be processed into the hole, tighten the screw to fix the rod, and you can operate it on the grinder..
  • Wide Application: The lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished. It is designed to be used with the wolveri....
Check Stock

3M High Power Spray Gun Cleaner, 26689, 15 oz (426 g)

  • PAINT SPRAY GUN CLEANER – Features a powerful cleaning formula in an easy-to-use aerosol can with wand that blasts paint from hard to reach areas.
  • LESS CLEANUP – Easy spray application reduces cleanup time for spray gun bodies, hard paint cups, atomizing heads, hoses and fittings.
  • USE FEWER SOLVENTS – Tight spray pattern helps reduce the use of cleaning solvents for removing paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats and sprayable adhesives from paint spray equipment.
  • VERSATILE – Removes waterborne and solvent-based coatings from metal spray equipment and composite/plastic components.
  • ideal for use on automotive and general industrial spraying equipment.
  • LOW VOC – Less than 25 g/L VOC, meets SCAQMD Rule 1171(c)(1) and other air quality regulations.
Check Stock

DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (10') | Best All in One Set with Injectable Filler for Repairing Cracked Foundations, Walls, Basements, Cement Structures

  • ...th time and money by using our specially engineered and designed repair package for your next project or concrete service job. Perfect for any size of workplace or household!.
  • BUY WITH CONFIDENCE: We pride ourselves on customer satisfaction and want you to feel secure in your purchase. If you are not happy with your equipment or merchandise for any reason, please send us a message and we will do our best to sort it out.
Check Stock

aokur DC 12V 5L Transfer Pump Extractor Oil Fluid Diesel Scavenge Suction Vacuum with Siphon Hose and Cigarette Light 60W

  • Maximum Pressure: Max. 0.8MPA，Maximum Flow: 5L/min, Rated Power: 60W, Rated Voltage: DC 12V.
  • Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries.
  • Please use when the engine is warm,the engine oil is warm and viscosity is lower,this will be easier and faster to pump.
  • Note: If you want to connect the pump to AC power, you need to have a power converter..
Check Stock

DRICORE PRO Concrete Repair Crack Repair Kit (Unidirectional, Horizontal) | Best All in One Set with Ten Foot Carbon Fiber for Repairing Cracking in Foundations, Walls, Basements, Cement Structures

  • ...th time and money by using our specially engineered and designed repair package for your next project or concrete service job. Perfect for any size of workplace or household!.
  • BUY WITH CONFIDENCE: We pride ourselves on customer satisfaction and want you to feel secure in your purchase. If you are not happy with your equipment or merchandise for any reason, please send us a message and we will do our best to sort it out.
Check Stock