Top Condenser Tubing

TYC 3086 Condenser Assembly Compatible with 2003-2007 Honda Accord

  • OE-comparable configuration and appearance.
  • Vehicle test-fitted prior to market release, ensuring perfect drop-in fit.
  • Louvered aluminum fins and tubes are bonded through the Nocolok furnace-blazing process for unsurpassed performance and durability.
  • Optimally thin and lightweight aluminum tubing maximizes heat transfer without compromising strength.
  • Receiver/dryer unit is offered as an integral part of the condenser unit where applicable.
Check Stock

TYC 3396 Condenser Assembly Compatible with 2007-2011 Toyota Camry

  • OE-comparable configuration and appearance.
  • Vehicle test-fitted prior to market release, ensuring perfect drop-in fit.
  • Louvered aluminum fins and tubes are bonded through the Nocolok furnace-blazing process for unsurpassed performance and durability.
  • Optimally thin and lightweight aluminum tubing maximizes heat transfer without compromising strength.
  • Receiver/dryer unit is offered as an integral part of the condenser unit where applicable.
Check Stock

TYC 4720 Condenser Assembly Compatible with 1996-2002 Chevrolet Gmc C/K

  • OE-comparable configuration and appearance.
  • Vehicle test-fitted prior to market release, ensuring perfect drop-in fit.
  • Louvered aluminum fins and tubes are bonded through the Nocolok furnace-blazing process for unsurpassed performance and durability.
  • Optimally thin and lightweight aluminum tubing maximizes heat transfer without compromising strength.
  • Receiver/dryer unit is offered as an integral part of the condenser unit where applicable.
Check Stock

Sauermann SI-30 120 Volt Mini Condensate Removal Pump for up to 5.6 tons (67Kbtu - 20Kw) Air Conditioners

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • THERMALLY PROTECTED MOTOR: 1/50 HP, 1 Amp, 60 Watts, 115 Volts, 60 Hz, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • INCLUDES SAFETY SWITCH and 20-FT VINYL TUBING: safety switch can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • 115 Volts, 1 Amp, 60 Watts, 3/8-inch OD barbed discharge, 65 GPH at 1-foot head, 15-foot shut-off, maximum 6.5 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, safety switch and 20-ft. tubing included.
Check Stock

Little Giant 554435, VCMA-20ULST 1/30 hp 80 GPH Pump, 6 ft. Cord, 115V-60Hz, Pack of 3 pcs

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • THERMALLY PROTECTED MOTOR: 1/50 HP, 1 Amp, 60 Watts, 115 Volts, 60 Hz, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • INCLUDES SAFETY SWITCH and 20-FT VINYL TUBING: safety switch can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • 115 Volts, 1 Amp, 60 Watts, 3/8-inch OD barbed discharge, 65 GPH at 1-foot head, 15-foot shut-off, maximum 6.5 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, safety switch and 20-ft. tubing included.
Check Stock

TYC - 3525 06-11 Hd Cvic Sdn Dx/Lx/Ex/Hybd W/ R/D Cond (Pfc)

  • OE-comparable configuration and appearance.
  • Vehicle test-fitted prior to market release, ensuring perfect drop-in fit.
  • Louvered aluminum fins and tubes are bonded through the Nocolok furnace-blazing process for unsurpassed performance and durability.
  • Optimally thin and lightweight aluminum tubing maximizes heat transfer without compromising strength.
  • Receiver/dryer unit is offered as an integral part of the condenser unit where applicable.
Check Stock

Grade 2 Titanium Sheet, Unpolished (Mill) Finish, ASTM B-265, ASME SB-265, 0.093' Thickness, 36' Width, 48' Length, OnlineMetals

  • Grade 2 titanium has high corrosion resistance, a high strength-to-weight ratio, and the approximate strength of 6061-T6 aluminum..
  • 0.093″ Thickness, 36″ Width, 48″ Length.
  • Titanium Grade 2 is typically used in aerospace components, automotive components, cryogenic vessels, heat exchangers, condenser tubing, and pickling baskets..
Check Stock

Grade 2 Titanium Sheet Unpolished Mill Finish ASTM B-265 ASME SB-265 0.125 Thickness 36 Width 48 Length OnlineMetals

  • Grade 2 titanium has high corrosion resistance, a high strength-to-weight ratio, and the approximate strength of 6061-T6 aluminum..
  • Titanium Grade 2 is typically used in aerospace components, automotive components, cryogenic vessels, heat exchangers, condenser tubing, and pickling baskets..
Check Stock

Laboy Glass Dimroth Reflux Condenser Coiled with 24/40 Joints 125mm in Coil Length 365mm in Overall Height with Glass Hose Connections Organic Chemistry Lab Glassware Apparatus

  • The Dimroth condenser used as reflux condenser is more effective than liebig condenser, allihn condenser,graham condenser,coiled condenser.It provides larger cooling surface than the coiled condenser.Comparing to the graham-style condenser(liebig,allihn,graham),the Dirmroth condenser is Excellent for use with high vapor pressure solvents.
  • An assembly of a reflux apparatus usually includes a Dimroth condenser,a round bottom flask,a drying tube,a separtory funnel or equalizing pressure funnel.If the flask is single-neck,a claisen adapter should be applied to provide an extra entry.If the flask is three-neck,the middle neck can be fitted a PTFE stirring shaft for better heating performance..
  • The coil style Dimroth condenser designed with tightly wrapped coil providing maximum cooling has a 24/40 top outer standard taper joint and lower inner drip tip joint.Hose connections have O.D.of 8mm at the largest serration.The jacket length is 125mm,the over height is 365mm.
  • Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • 100% 90 DAY MONEY BACK GUARANTEE simply return for a full refund,no question asked.
Check Stock

Laboy Glass Reflux Condenser 24/40 Large Cooling Capacity 175mm in Coil Length 350mm in Overall Height with Glass Hose Connections Organic Chemistry Lab Glassware Apparatus

  • The Dimroth condenser used as reflux condenser is more effective than liebig condenser, allihn condenser,graham condenser,coiled condenser.It provides larger cooling surface than the coiled condenser.Comparing to the graham-style condenser(liebig,allihn,graham),the Dirmroth condenser is Excellent for use with high vapor pressure solvents.
  • An assembly of a reflux apparatus usually includes a Dimroth condenser,a round bottom flask,a drying tube,a separtory funnel or equalizing pressure funnel.If the flask is single-neck,a claisen adapter should be applied to provide an extra entry.If the flask is three-neck,the middle neck can be fitted a PTFE stirring shaft for better heating performance..
  • The coil style Dimroth condenser designed with tightly wrapped coil,jacket with an O.D.of 40mm while coil with an O.D.of 8mm , providing larger cooling surface than HMC010603.It has a 24/40 top outer standard taper joint and lower inner drip tip joint.Hose connections have O.D.of 8mm or 10mm at the largest serration.The coil length is 175mm,overall height is 350mm.
  • Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
Check Stock

POPETPOP Condenser Glass Condenser Tube Jacket Length Lab Glass Condenser Chemistry Condenser Chemistry Experiment Tool

  • This experiment equipment can be a practical and helpful way to introduce kids to operate the experimental equipments and have the experiments. lab glass condenser.
  • This condenser pipe is perfect for home education, chemistry lesson and laboratory use. lab condenser.
  • It can improve kids imagination and hands- on ability through interactive play. lab condenser pipe.
  • The chemistry condenser pipe is made of glass material, which is durable and practical for the lasting use. lab condenser tube.
  • Sturdy and tool that can help you to complete your experiments. glass condenser.
Check Stock

Laboy Glass Graham Condenser Coiled with 24/40 Joints 300mm in Jacket Length Distillation Apparatus Inland Revenue Condenser Lab Glassware with 10 mm Glass Hose Connections

  • The graham-style condenser having the configuration that the jacket tube contains coolant,and condensation takes place inside the inner tube or coil includes Liebig condenser,Allihn condenser,West condenser,Graham condenser. A graham condenser consists of an inner spiral surrounded by an outer jacket tube ,maxmises collected condensate because all the vapors must flow through the entire length of the spiral,thereby having prolonged contact with the coolant..
  • Graham condenser also called Inland Revenue condenser,usually used in the downward distillation or vacuum evaporations , installed vertically to prevent liquid pooling in the tube. It is very similar to the coiled condenser but differentiated by an inverted coolant/vapor configuration..
  • This Graham condenser is designed with 24/40 standard taper joints at top and bottom to fit the distillation flask and other lab jointed glassware apparatus,with 10mm glass hose connections and a jacket length of 300mm.
  • Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • 100% 90 DAY MONEY BACK GUARANTEE simply return for a full refund without any reason.
Check Stock