Top Conductivity Controller
Hanatora RC-N1 Remote Controller Antenna Range Extender Yagi-UDA 5.8Ghz Boosters for DJI Mavic 3,Mini 2,Mini 3 Pro,DJI Air 2S,Mavic Air 2 Drone Signal Accessories
- Specially design for RC N1 Remote Controller(DJI Mavic 3,Mini 2,Mini 3 Pro,DJI Air 2S,Mavic Air 2 remote controller).
- High-quality materials: ABS+mirror aluminum+copper, with good conductivity and reflectivity.
- Conducive to achieve better use effect, please note:before using you need to change the frequency to 5.8Ghz.
- The antenna faces the direction of the drone to ensure the optimal transmission zone.
- Fly in an open areas, try to stay away from buildings and other serious interference sources.
- Easy and quick installation and remove.weight: 21.9g.
- Enhance the best transmission area for sending and receiving, making the signal farther and stable.
Check StockSCOVEE Mini USB Cable Type A to Mini B Charger Cord for PS3 Controller,MP3 Players,Dash Cam,Canon Camera,SatNav,Garmin Nuvi,Playstation-3,USB Mini-B Charging Cable Compatible for GoPro Hero 3+ 3ft
- SCOVEE mini usb cable connects your USB-ready computer to a digital camera like Canon PowerShot/Rebel or other mini-b portable device with a mini B 5-pin connector, such as an MP3 player,PDAs,old Phone,Dash Cam Accessories,ps3 controller..
- Wide Compatibility: mini usb cable is compatible for GoPro HERO HD, HERO 3+,Playstation-3 controller (also named PS3 controller ), MP3 players,Astro A40 / 50, HTC, Digital Cameras like Canon,Sat Navigation, Garmin Receiver, Zoom Mic, Dash Cam,Ti-84 etc and other devices with Mini b 2.0 5 Pin connector..
- High Speed Transfer: Up to 480 Mbps data transfers speed for USB 2.0 devices, the SCOVEE USB Mini B Cable is backwards compliant with full-speed USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps)..
- Premium Connector and Cable Quality: Corrosion-resistant bare copper conductors, high quality connector provide the mini usb to usb cord maximum conductivity and minimize data loss..
- What You Get: SCOVEE usb mini b cable 1pcs 3.3ft.
Check StockRENOGY 8ft. 10 AWG Wire Copper Tray Cable - Connect Charge Controller and Battery
- TUV tested cable. TUV logo print per feet indicates that the cable meets TUV standards for PV solar application.
- UV resistant and waterproof. Produce optimal power output even in high temperature conditions..
- Contain a set of positive and negative cables to connect the charge controller to battery. The Temperature is from -40°F to +185°F. The Rating Voltage is TUV 1000V..
- Heat-shrink tubing insulates wires, provides abrasion resistance and electrical safety. 3/8 inch round center hole..
- High-purity oxygen-free Copper wiring for maximum conductivity. Tin plating..
Check StockTercel Battery Charger for DJI Phantom 3 SE Standard Professional Advanced Drone and Phantom 3 Pro/Adv Remote Controller,Multiple Rapid Parallel Charging Hub
- Parallel Time-saving Charger: This charger can charge 3 batteries & 1 remote controller simultaneously. It takes only 60-80 mins to complete a full charge of 3 batteries in total. Input: 110-240V.
- Output: 17.5V 13.5A (branch: 17.5V 4.5A).
- Safty Protection: The shell is subjected to anodic oxidation without conductivity, as well as the connection to the ground, double insurance safer.The built-in safety system fully protects the charger from overcharge, over voltage, over temperature and short circuit..
- Durable Material: This charging hub is made of premium aluminum alloy. The sturdy hard shell is fire-proof, heat-resistant and fast in heat dissipation.
- Unique Exhaust Fan: The cooling exhaust fan built in effectively reduces heat inside and prevent high temperature during charging..
- Comptiable List: Battery: DJI Phantom 3 SE, DJI Phantom 3 Standard/Professional/Advanced, DJI Phantom 3 4k.
- Remote controller: DJI Phantom 3 Professional/Advanced and DJI Phantom3 4K (NOT INCLUDE DJI Phantom 3 SE/DJI Phantom 3 Standard)..
Check StockBluelab CONTPRO Pro Controller for Fully Automated 24/7 Digital Monitor, Dosing, and Data Logging of Hydroponics Reservoir (Base Only, No Pump), includes pH, EC, and temperature probe
- Test, measure and control (doser) pH and nutrients (tds) in solution to make precise up and down adjustments with lab quality probes for use in hydroponic system and grows with reservoirs.
- multi-part nutrient dosing with Peripods.
- EASY two point calibration for pH sensor, and auto temperature compensation, with backlit LCD display and calibration reminders.
- Data logging with Bluelab Connect software (Connect stick sold separately).
- 24/7 meter for your nutrient and ph level to maximize your grow and ensure plants get the balanced feed they need.
- high and low alarm when outside parameters.
- tester parameters can be viewed on mobile phone.
- Other features: flexible mounting options, replaceable probes, high RF tolerance, units for temperature and conductivity.
- KIT INCLUDES Pro Controller, pH/EC/temperature sensor (Peripod pumps sold separately).
- Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment.
- 2 Year Limited Warranty with proof of purchase on the controller (6 month warranty for pH probe).
Check StockBlue Sea Systems 5129 Fuse ANL 200-AMP
- Wire Gauge:- It can securely hold the fuse and use it with 1/0,2,4AWG Ring Terminals..
- Application:These inline fuse will protect your controller, wire, and battery from overcurrent,suitable for auto car, boat ,truck audio video systems or other vehicles..
- Material:ANL fuse made of copper alloy and gold plating on the surface, durable and reliable to use, heat resistant, melting resistance and good conductivity, clear cover and holder features transparent design, allow you to visually see the operation of the fuse, waterproof cover protect the internal fuses from water and further damage..
- Notice:Because the fuse will be damaged during transportation, the fuse and fuse box are packed separately and can be used after simple installation after receiving the goods..
- Package:2pcs ANL Fuse+2pcs ANL Holder+4pcs Copper Ring Terminal+4pcs Heat shrinkable tube.
Check Stock10FT USB Cable Cord Wire for Blue Snowball iCE USB Mic & Blue Yeti USB Mic Black Out (NOT for All Blue Yeti Mics, See Product Picture to Check Compatibility)
- ... Nylon-Braided & Nickel-Plated: Tangle-free nylon braided material and wear-resistant aluminum shell make the mini USB charger cable able to bend over 10000 bendings.
- the combination of nickel-plated connectors and foil & braid shielding keeps the USB mini B cable maximum conductivity and minimizes data loss, provides a safer and more reliable charging..
- Wide Compatibility: USB to mini USB cable is compatible with GoPro HERO HD, HERO 3+, Sony Playstation-3 controller (also named PS3 controller), MP3 players, Astro A40 / 50, HTC, Digital Cameras like Canon PowerShot ELPH / Rebel / EOS, Sat Navigation, compatible for Garmin NUVI GPS, Hard Drive, Dash Cam, Blue Yeti, Ti-84 and other devices with Mini b 5 Pin connector..
- NOTE: This is a MINI USB Cable, NOT a micro USB charging cable, please be aware of the type before you buy it..
Check StockAllEasy 15ft/4.5m Mini USB Cables, 5 Pin USB 2.0 Type A Male Mini USB Charging Cable with Gold-Plated Connectors for PS3 Controller, Digital Camera(Canon, Sony), MP3 Player -Black
- 15-FOOT-LONG HIGH-SPEED USB 2.0 A-Male to Mini-B cable.
- THIS LENGTHY PLAYSTATION 3 CONTROLLER CABLE allows you to charges electronic devices such as external hard drives, GPS, PS3 controller, digital cameras, or camcorders equipped with the USB Mini-B port.
- CONNECT DEVICES: Including external hard drives and smart phones/mobile phones, MP3 players, tablets, digital cameras, Bear Extender, digital camcorders, blue yeti microphone, garmin nuvi chager adapter and peripherals that require a Mini-B connection to your computer.
- Supports Hi-Speed USB 2.0 transfer rate at up to 480 Mbps,backwards compliant with full-speed USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps).
- Gold plated connectors for corrosion resistance ensuring consistent and reliable conductivity, if it comes defective or damaged, feel free to contact us by Buyer-Seller Message.
Check StockSCOVEE Mini USB Cable Braided 6ft Type A Male to Mini B Cable Data Charging Cord for GoPro Hero 3+,Sony PS3 Controller Cord,MP3 Player,Garmin Nuvi,Dash Cam,Canon PowerShot Rebel ELPH Camera Charger
- ...pliant with full-speed USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps)..
- Premium Connector and Cable Quality: Aluminum shell and nylon braided jacket build sturdy and durable mini usb cable, Corrosion-resistant bare copper conductors, gold-plated connector and nylon braid shielding keep the usb mini cable maximum conductivity and minimize data loss..
- What You Get: 1 Pack 6 feet Premium Nylon Braided Mini-USB Cable Cord. Color:Black. Length: 6ft SCOVEE usb mini b cable, a perfect replacement..
Check StockCooler Master Hyper 212 LED Turbo ARGB CPU Air Cooler - Jet Black Aluminium Finish, 4 Continuous Direct Contact Heat Pipes with Fins, Dual SickleFlow 120 ARGB Fans, ARGB LED Controller - ARGB
- JET BLACK TOP COVER & ARGB FAN BLADES - Features an elegant black aluminium top cover & frosted white fan blades for enhanced ARGB light dispersion & vibrant effects.
- DUAL SICKLEFLOW 120 ARGB FANS - Dual 120mm fans provide a dynamic Push-Pull configuration that optimises airflow (62 CFM) and air pressure (2.5mmH2O) while running extremely quietly (27 dBA).
- DIRECT CONTACT TECHNOLOGY - The primary heat exchanger features 4 embedded copper heat pipes (Ø6mm) in flat array and includes additional aluminium fins with lateral grooves upon the plate to further augment thermal conductivity.
- MINI ADDRESSABLE RGB LED CONTROLLER - An included ARGB controller allows manual control over the ARGB settings, which can also be assigned via ASUS Aura, ASRock RGB, GIGABYTE and MSI ARGB motherboards.
- AMD & INTEL COMPATIBLE - Includes all-in-one mounting brackets that support Intel (LGA2066, LGA2011-v3, LGA2011, LGA1200, LGA1151, LGA1150, LGA1155, LGA1156, LGA1366) & AMD (AM4 AM3 AM3 AM2 AM2 FM2 FM2 FM1) sockets.
Check StockHanatora 4 in 1 Rapid Multi Battery Charger with Ground for DJI Phantom 4/4 Advanced/4 Pro V2.0/4 Pro Plus Obsidian Drone&Remote Controller,Parallel Charging hub for Phantom 4 Series
- Parallel Time-saving Charger: This charger can charge 3 batteries & 1 remote controller simultaneously. It takes only 60-80 mins to complete a full charge of 3 batteries in total. Input: 110-240V.
- Compatible with DJI Phantom 4 series flight batteries..
- Durable Material: This charging hub is made of premium aluminum alloy. The sturdy hard shell is fire-proof, heat-resistant and fast in heat dissipation.
- Safty Protection: The shell is subjected to anodic oxidation without conductivity, as well as the connection to the ground, double insurance safer.The built-in safety system fully protects the charger from overcharge, over voltage, over temperature and short circuit.
- Unique Exhaust Fan: The cooling exhaust fan built in effectively reduces heat inside and prevent high temperature during charging.
- What you get:1xPhantom 4 Charger(Note:DJI Batteries and Remote Controller not included).AFTER-SALE-SERVICE Your 100% satisfaction is promised.6-Month warranty, money back or a free replacement if the product damaged during this period.
Check StockEnermax Aquafusion 120 ARGB CPU Cooler with LGA1700 Mounting kit for Intel 12th Gen Alder Lake (White)
- 3D layer Aurabelt design supports Synchronizable ARGB lighting via motherboards with 3pin ARGB header(s)(5v ARGB) - Includes a wired RGB Controller.
- Dual Chamber water block design isolates the pump from heat to prolong cooler lifetime.
- Patented Shunt-Channel-Technology (SCT) boosts thermal conductivity and eliminates any heat surges.
- Square-shaped SquA RGB fans can generate centered & stronger air pressure with its enlarged blade surface and vortex frame design.
- Intel/AMD CPU socket support: LGA2066, LGA2011-v3, LGA2011, LGA1700, LGA1200, LGA1151, LGA1150, LGA1156, LGA1155, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.
Check Stock