Top Conduit For Hazardous Areas

DEWALT 8V MAX Cordless Screwdriver with Conduit Reamer, Gyroscopic, Electric (DCF681N2)

  • The cordless screwdriver features motion activation variable speed and reversing control for precise fastening control.
  • The rechargeable screwdriver has ream 1/2-inch, 3/4-inch and 1-inch conduit and install fittings in a fraction of the time.
  • Motion activated variable speed 0-430 rpm of the powered screwdriver is made for fastening into wood, plastic, and light-gauge metal.
  • LED provides illumination in confined areas without shadowing.
  • Battery charge status on tool notifies when to charge packs.
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,3/4inch 25ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,3/4 in Dia

  • 【PREMIUM Liquid-Tight Conduit】- Length :25'，ID：3/4inch，OD：1inch，Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical Conduit....
  • 【Complete Accessories】-3/4-Inch 25Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1inch50ft Electrical Conduit Kit,with5 Straight and3 Angle Fittings Included,1 in Dia 50FT

  • 【PREMIUM Liquid-Tight Conduit】- Length :50'，ID：1inch，OD：1.22inch， The Flexible Non Metallic Liquid Tight Electrical Conduit kit ​is....
  • 【Complete Accessories】-1-Inch 50Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

10pk Danger Tape Roll - 10 Rolls - 1000 Ft x 3 Inch Wide Each - Red Safety Tape for High Visibility Outdoor Warning, Flagging Construction Hazard, Crime Scene Barrier, Danger Zone

  • INDUSTRIAL GRADE Danger TAPE - Establish a perimeter and warn employees & passersby of hazardous areas to look out for with this industrial grade Danger tape. Large, bold black lettering stands out clearly on a Red background and is visible from 200 feet..
  • WORKPLACE & JOB SITE SAFETY - Prevent injury & accidents and make safety the #1 priority. Ideal for contractor work, construction sites, traffic hazards, crime scene investigations, bio-hazardous materials, chemical spills, danger zones and restricted areas..
  • ULTRA HIGH VISIBILITY RED - Designed with an ultra high visibility, vivid RED color that is instantly noticeable from a distance during the day, at night and in rainy or stormy weather conditions. Unroll the tape, cut to desired length and wrap/tie as needed..
  • TOUGH, DURABLE, EASY TO USE - Xpose Safety Danger tape is engineered for all-weather resiliency and put through a rigorous testing process to ensure it won't tear or sag easily once installed. Heavy black & Red dyes are resistant to fading and UV damage..
  • 10 EXTRA LARGE TAPE ROLLS - The tape is 3 inches wide for maximum legibility and visibility from a distance. It unrolls smoothly and easily from the spool, saving you time and effort on the job. Each 1000 ft. roll can mark a perimeter for u....
Check Stock

Slip 2000 Gun Lube 4oz Pump

  • Long-lasting lubrication: Slip2000 gun lubricant penetrates into the smallest, tightest areas that regular oils cannot usually reach. This allows it to replenish the lubricant that has been lost, providing a long-lasting protective coating that reduces F.
  • PROTECTION FROM CORROSION: Slip 2000 Gun Lubricant's unique formulation provides a long-lasting barrier on all metal parts that protects against corrosion and that will not attract dust, dirt, or other abrasive contaminants..
  • NO SILICONE OR PTFE INGREDIENTS: Slip 2000 Gun Lube does not contain any silicone or PTFE (Teflon) ingredients. Therefore, it will not burn off like petroleum products and is safe to use on metal, wood, and plastic parts..
  • Reduce cleanup time by 50%: Slip2000 gun lube does not stick to carbon, Copper, lead, or plastic and will reduce cleanup time by 50%!.
  • Non-toxic and non-hazardous: Slip2000 gun lube is non-toxic and non-hazardous. All Slip2000 products are developed with your health and safety in mind!.
Check Stock

HydroMaxx Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit (1\ Dia x 25 ft)

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Woods Southwire 55094222 Liqua Flex 1/2-Inch by 50-Feet Non-Metallic Liquidtight Flexible Conduit

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 1/2-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1/2\ Dia

  • Use with Sealproof straight or right angle connectors.
  • can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 3/4-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 3/4\ Dia

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

AMZCNC 8 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set (8T（1/2"~2"）)

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage..
  • Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8".
  • Max thickness for stainless steel: 1/16"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weigh....
Check Stock

Woods 55082122 AL Flex Fo5000050M Type Rwa Reduced Wall Flexible Conduit, 1/2 in X 50 Ft, Aluminum

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

RHS Snow Melting System Roof and Valley Heater Ice and Snow Melting Mats Sizes 10 feet x 13 inches Color black 10ft mat melts 2 inches of snow per hour buy factory direct 10 ft x 13 in

  • ...ts associated with water damage caused by the inability of roofs to drain water during winter months..
  • Melts 2 inches of snow per hour, UL listed components are made to sustain the most harsh environments. RHS Valley heaters have a complete waterproof system which serves for the most demanding environments including hazardous and non-hazardous areas, as well as areas where corrosives may be of concern. The valley heaters provides 40 watts per foot at 120 volt..
  • Easy installation, valley heaters are 10 feet length (can be made in 8', 15', and any other size up to 50' ft. for custom orders) roofing grommet screws included with the system are 100% waterproof and easy to insert on the valley heaters..
  • No more clinbing on a ladder to shovel your roof, RHS Valley Heaters go right over the problem areas on the valley, 6.5" inches to one side and 6.5" inches to the other side to completely melt the snow from the valley, just attach the grommet screws at the labeled locations to secure in place and relax, and watch RHS Valley Heaters get the job done..
  • RHS Valley Heater System provides with the most proficient, highly scalable and eco-friendly snow melting solution. Our roof systems are offered for all types of applications, including new construction, remod....
Check Stock