Top Conduit Multi grip Connector
1/2 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting,,UL Listed, (6 PACK) (1/2-180D)
- THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
- NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
- O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
- METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,,UL Listed, (2 PACK) (1-1/2inch 180d)
- THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
- NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
- O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
- METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check StockFLKQC 100 Feet (30M) Steel Fish Tape in Red Plastic Housing Retractable Wire Fish Tape Reel Pulling for Heavy Duty Pulls, Short Runs and Conduit Measuring
- Premium Steel Wire Material: Constructed with high strength steel retractable straps for our fish tapes, rust free and tangle free even through dry wall, conduit, insulation, pipe, cable conduit work and more..
- 100 Feet Steel Wire: 1/8-inch wide 1/16 inch thick steel 100ft length is perfect for long wire runs and heavy duty wire pulls, even suitable for the insulated walls and over suspended ceilings..
- Strong & Durable: Offering a tensile strength of 660 pounds and a maximum load of 570 pounds. The tape is durable, long-lasting and resistant to rust and corrosion..
- Ergonomic Case: PP case and the soft grip handle are extremely durable and steady when you pull the fish tape, non-slip finger grips offer maximum in shock and impact resistance..
- Easy To Use: This reel winds up and stores excess tape. This fish tape can pull cables and wire through drywall, conduit, and pipes.
Check StockKlein Tools 85191 Screwdriver / Conduit Reamer Conduit Fitting and Reaming Screwdriver for 1/2-Inch 3/4-Inch and 1-Inch Thin-Wall Conduit
- Reamer's hooded-blade design keeps tip from slipping out of screws, especially when tightening hard-to-reach conduit fittings.
- Reams and smooths 1/2-Inch (13 mm), 3/4-Inch (19 mm), and 1-Inch (25 mm) thin-wall conduit ends to protect wire and permit correct installation of....
- Reams both the inside and outside of the conduit at the same time.
- Longer Cushion-Grip handle provides comfort and more torque for reaming.
Check StockMECMO Multi-Tow 4-Way Flat to 7-Way RV Blade and 4-Way Flat Female Trailer Wiring Adapter Connector Kit Adapt 4-Way Flat Vehicle-Side Socket to Multiple Trailer Plugs with Mounting Bracket
- 【Multi-Plug】This dual-output 4 Pin and 7 Pin trailer wiring adapter makes it easy to tow different trailers with your vehicle, for used to convert any 4-wire flat vehicle-end plug to a combination 7-way blade RV outlet and 4-way flat outlet. Provides multiple towing options from one vehicle-end connector for towing any heavy / light duty trailers. This special dual-output electrical adapter allows a connection to be made between a mismatched trailer plug and vehicle socket..
- 【Universal Trailer Adapter】MECMO Multi-Tow 4&7 trailer connector adapter provides two standard trailer connections, a 7-pin RV blade and a 4-way flat socket, adapting for versatile towing options. Additional leads for brake, reverse and power function allowing you to transfer your 4-pin factory connector to a standard 7-way..
- 【4 Flat & 7 Way Blade Output】 Dual 4 way and 7 way trailer hitch wiring adapter allows you to connect 4 poles or 7 poles trailer to your factory 4 pin socket to power taillights, brake lights, turn signals, reverse lights, electric trailer brakes and auxiliary power (12V+ wire)..
- 【Heavy Duty】 Both 7-way RV output socket and 4-way flat equip with a tight-fitting dust cover and a spring loaded cover to keep terminals clean when not in use.....
Check StockKlein Tools 56383 Fish Tape, Multi-Groove Fiberglass Wire Puller with Nylon Tip, Optimized Housing and Handle, 100-Foot x 0.182-Inch
- Multi-groove fiberglass fish tape has a strong core for better pushing power while the grooves provide less surface area for smoother tape feeding.
- Case design decreases payout effort and friction by optimizing the tape payout angle.
- Slip-resistant housing geometry improves winding power and reduces binding.
- Multi-position handle gives you a firm, steady grip as you pull or rewind the tape.
- Updated non-conductive nylon tip is narrower for easier feeding and chamfered for less catch when pulling.
- Durable fiberglass is longer lasting and maneuvers better in crowded conduit.
- Polypropylene case and handle offer high impact resistance.
Check StockKlein Tools 56382 Fish Tape, Multi-Groove Fiberglass Wire Puller with Nylon Tip, Optimized Housing and Handle, 50-Foot x 0.182-Inch
- Multi-groove fiberglass fish tape has a strong core for better pushing power while the grooves provide less surface area for smoother tape feeding.
- Case design decreases payout effort and friction by optimizing the tape payout angle.
- Slip-resistant housing geometry improves winding power and reduces binding.
- Multi-position handle gives you a firm, steady grip as you pull or rewind the tape.
- Updated non-conductive nylon tip is narrower for easier feeding and chamfered for less catch when pulling.
- Durable fiberglass is longer lasting and maneuvers better in crowded conduit.
- Polypropylene case and handle offer the maximum impact resistance.
Check StockIDEAL Electrical 31-06 Stainless Steel Fish Tape – 240 ft. Stainless Steel Fish Tape w/ Formed Hook & Tuff-Grip Pro Case, Non-Oily Finish, Laser Etched Increments
- Pulling Tape: designed to assist in heavy-duty electrical applications, this tape is a reliable tool for longer conduit runs. It is laser etched in an increments of 12 in. to provide an instant conduit length for routing the wire in the electrical setup.
- Premium Material: the fish tape is made using high-quality of stainless steel that is resistant to rust and corrosion. This boosts the lifespan of the tape, making it reliable for electrical conduit runs.
- Impact Resistant: the wire puller tape has a finish that makes it resistant to rust and corrosion. It ensures smooth operation, making it a safe tool for routing the wires abrasive electrical environments.
- Ergonomic Design: the replacement fish tape is carefully designed to keep the wires holstered within the case after a long fall. It is straight and stiff that maximize user convenience during the work.
- Product Specifications: the Ideal Electrical Conduit Tape with formed hook end and Tuff-Grip Pro case measures 1/8 x 0.060 in. It is available in a standard length of 240 ft. and offers 1,600 lb. of tensile strength.
Check StockSMC D-M9B Auto Switch, Solid State, General Purpose
- Band, rail, tie-rod and direct mounting styles.
- Electrical entry: grommet, connector, terminal conduit.
- Direct mount: solid state, general purpose, 2 wire, horizontal.
Check StockKlein Tools 56331 Fish Tape, Steel Wire Puller with Double Loop Tip, Optimized Housing and Handle, 1/8-Inch x 50-Foot
- Durable 1/8-Inch wide steel fish tapes are firm yet flexible for large wire pulls.
- Optimized design of the tape housing decreases payout effort.
- slip-resistant geometry improves winding power.
- Multi-position handle gives you a firm, steady grip as you pull tape from the case.
- Descending laser etched markings in 1-Foot (0.3 m) increments.
- Easy-to-read distance marks allow you to more accurately measure conduit runs and the amount of tape left to pay out.
- Polypropylene case and handle offer high impact resistance.
Check StockKlein Tools 56333 Fish Tape, Steel Wire Puller with Double Loop Tip, Optimized Housing and Handle, 1/8-Inch x 120-Foot
- Durable, high-carbon strength 1/8-Inch wide steel fish tapes are firm yet flexible for long runs and large wire pulls.
- Case design decreases payout effort and friction by optimizing the tape payout angle.
- Slip-resistant housing geometry improves winding power and reduces binding.
- Multi-position handle gives you a firm, steady grip as you pull or rewind tape from the case.
- Descending laser etched markings in 1-Foot (0.3 m) increments allow you to more accurately measure conduit runs and the amount of tape left to pay out.
- Protective coating on the steel tape reduces corrosion from non-contact moisture and humidity.
- Polypropylene case and handle offer high impact resistance.
Check StockGardner Bender GBX-300 BX Armor Cable Cutter
- Cuts BX, MC, AC, and liquid tight ⅜ in.
- Quick clamp feature that automatically adjusts to the cable size and secures it for splitting.
- Cutting depth adjustment to ensure clean cuts without nicking the cable.
Check Stock