Top Conduit Nipples And Connectors

1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,，UL Listed, (2 PACK) (1-1/2inch 180d)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

Hotop NPT 3/8 Inch Stainless Steel Male and Female Quick Connector Kit Pressure Washer Adapter Set and 2 Packs NPT 3/8 Inch Stainless Steel Quick Connector Plug Male Nipples

  • Fine workmanship: these quick pressure washers and pressure washers nipples are made with accurate process, and don’t leak and fade easily.
  • NPT-compliant: these adapter sets and quick connector plug nipples are all NPT-compliant, please check the specifications before connect them, you can connect to most NPT-compliant connectors.
  • Size: stainless quick connector kit and pressure washers coupler nipples are 3/8 inch, pay attention to connect to the 3/8 inch size connector before connecting.
  • Strong pressure resistance: these quick connector kit and stainless steel connect nipples withstands pressure is up to 5000-6000 PSI.
  • Easy to connect: you can assemble these pressure washers and quick connector plug nipples easily, these adapter sets and nipples make a quick connection for hose, water pump, ball valve, telescoping wand, surface cleaner and so on.
Check Stock

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
  • ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
  • ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check Stock

Morris Products 2 Hole EMT Pipe Strap – 1/2 Inch - Secures EMT Conduit - Zinc-Plated Steel - Reinforced Rib, Holes – Snap-On Installation – 100 Pieces

  • SECURE CONDUIT: Ensure that your conduit is safely secure with these 2-hole EMT Pipe Straps that feature reinforced holes and a reinforced rib for extra strength..
  • DURABLE CONSTRUCTION: Morris Products’ EMT Pipe Straps are manufactured from zinc-plated steel for ultimate durability. Each pipe strap is cULus listed..
  • SIZE AND QUANTITY VARIETY: Choose the exact size you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½” and 2”. Quantities range from 5 EMT pipe straps to 100 in each pack..
  • SIMPLIFIED INSTALLATION: Take less time to complete each task with the snap-on installation of these EMT pipe straps that easily secure EMT conduit..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Morris 21816 Liquid Tight Connector Straight Non-Metallic 1-1/4 Thread Size 1-Pack

  • Non-Metallic Liquid Tight Wire Connectors Straight With Steel Locknut - Our Liquid Tight Straight Connectors are weather and corrosion-proof..
  • For use with Non-Metallica Liquid Tight conduit.
  • Type B - Nylon construction with Zinc Die Cast Locknut - resists saltwater, gasoline, alcohol, oil and grease.
Check Stock

RiteAV - Direct Burial/Outdoor LC-LC 2-Strand Fiber Optic Cable - OM3 Multimode (50/125) - 250M (820ft)

  • Can be used outdoor and can be buried in the ground without conduit..
  • Side A terminated with LC-UPC connectors..
  • Side B terminated with LC-UPC connectors..
Check Stock

Sealproof 1-Inch Non-metallic Liquid-Tight Conduit and Connector Kit, 25 Foot Made in USA Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1" Dia

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Sealproof Made in USA flexible PVC conduit resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

Halex, 3/4 in. Electrical Metallic Tube (EMT) 1-Hole Straps , 61507B, 100 per pack

  • SECURE CONDUIT, PIPES, CABLES: Ensure that your conduit, pipes and cables are safely secure with these 2-hole PVC Pipe Straps that are UL listed..
  • DURABLE CONSTRUCTION: Morris Products’ PVC Pipe Straps are manufactured from heavy duty polythene for ultimate durability..
  • SIZE AND QUANTITY VARIETY: Choose the exact size PVC pipe straps you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 3” and 4”. Quantities are available in 25, 50 and 100 pieces in each pack..
  • RESISTS DETERORATION: The durable construction of each PVC pipe strap allows for less breakage from extreme cold while resisting deterioration from UV rays..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Motif Medical, Double Pumping Kit, Replacement Parts for Breast Pump - Medium 24mm

  • The Luna resupply kit is used to ensure that all your pumping parts and accessories are clean and safe for use..
  • This kit is wonderful for replacing worn, damaged or lost parts. This resupply kit is compatible with the Motif Luna breast pump.
  • Each resupply kit comes with two of the following parts: Bottles, Nipples, Tubing, Tubing Connector Pairs, Diaphragms, Lids, Caps, Tops, Valves, Connectors, 24mm Breast Shields, Breast Shield Connectors..
  • Rest assured that all parts of the replacement kit are 100% BPA free..
Check Stock

Wiremold Power Strips Plugmold End Feed Fitting V2010A2

  • For connecting 2000 with 1/2" conduit and armored cable connectors.
  • 1/2" trade size KO's on end each side and bottom.
Check Stock

E26 E27 Ceramic Light Socket, Helunsi Medium Base Porcelain Lamp Holder, Ceramic Light Bulb Socket with 12" Wire Lead, Medium Base Lampholder for Incandescent Led Light Bulbs Replacement (Pack of 4)

  • ...ature resistant, convenient pre-wired and more durable than other kinds of light sockets..
  • Easy Installation >>> Pack of 4. Includes: red insulated fiberboard (Prevent electric shock) and female threaded iron bracket, 4 x lamp pipe nipples, 4 x lock nuts, 8 x wire connectors nuts, 1x user's manual and electrical leads ready to connect, no need to purchase extra mounting hardwares..
  • Specification >>> Name: Helunsi E26 bulb socket.
  • Pre-wired length: 12 inchs / 30cm. Comes with pipe nipples, lock nuts and wire connectors nuts. (Please see the fifth picture about the size.).
  • Application >>> Used to replace old or damaged bulb sockets and DIY lighting fixtures. Suitable for E26 E27 based incandescent, halogen, CFL, LED light bulbs and heat lamps..
  • Quality Guarantee >>> Helunsi ceramic light bulb socket is backed by 1-year unconditional warranty. Just feel free to contact our customer service department at any time if you have any product issue or question..
Check Stock

Southwire 58133701 3/4-in Liquid-Tight Connector,Grey

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock