Top Conduit Surface Raceway

Woodhead 35974 Pulling Grip, Junior Duty, Flexible Eye, 4100lb Approximate Break Strength, 10.00\ Mesh Length, .75–.99\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 10 in. in mesh length and works with 0.99 in. cable diameter. The pulling grip cable maintains an approximate break strength of 4100 lb..
Check Stock

Woodhead 35972 Pulling Grip, Junior Duty, Flexible Eye, 1700lb Approximate Break Strength, 8.00\ Mesh Length, .50–.61\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 7 in. in mesh length and works with 0.61 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35973 Pulling Grip, Junior Duty, Flexible Eye, 2800lb Approximate Break Strength, 10.00\ Mesh Length, .62–.74\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 10 in. in mesh length and works with 0.74 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Clamp Type Connector Cable Connector Clamp Cable Connector for Metallic Conduit Protect Cables Silver (4, 3/4 Inch)

  • Multi-quantity: there are 8 pieces cable connectors in the package, enough quantity to meet your replacement and using needs in daily work, better cooperate with you to finish work.
  • Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure.
  • Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy.
  • Screw straps design: the 650XY2 clamp type connector has 2 pieces screw straps and flexible conduit FTGS.
  • It is the service entrance cable fittings but does not the metallic cable.
  • Cable size measures 14 awg, and the knockout is about 1/2 inches.
  • Size information: cable connector clamp is about 1/2 inches, before purchasing, pay attention to whether it meets your daily needs for work and cooperation, in order to prevent wrong purchase.
Check Stock

Cable Raceways Cable Concealer On-Wall Cord Cover Raceway Kit - Cable Management System to Hide Cables,Cords,or Wires - Cord Organizer for TVs and Computers at Home or in The Office

  • Wire Hider Cable Management Kit: With this cable management system, helps you to manage all your cables and wires, hide unnecessary &.
  • clutter electronic cords and cables, keep room clean and neat. This is exactly what you need to solve thorny cable problems.
  • Quality PVC Raceway Channels: High strength and sturdy PVC cable raceway can be cut to the length you want, not too long or too short. Easy to slide cord covers and never get stuck. You can also paint on the cord channel r to match the color of your wall.
  • Conceal cords and cables in any room of the home for a clean, organized appearance. Lamp cords can be concealed down the wall and along the baseboard. Improve the look of a home office by hiding the printer, computer and Ethernet cables out of sight..
  • Protect wires bite from pets, surface mount cable raceway can avoid babies fall for mass wires. Make wires tightly, make your home less dust and easy to clean.
  • What You Get: 6pcs 15.7*1.18*0.59 inch white raceway 。（This kit does not include any connector accessories）.
Check Stock

Woodhead 35975 Pulling Grip, Junior Duty, Flexible Eye, 4100lb Approximate Break Strength, 12.00\ Mesh Length, 1.00–1.24\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 12 in. in mesh length and works with 1.24 in. cable diameter. The pulling grip cable maintains an approximate break strength of 4100 lb..
Check Stock

Cable Matters 200-Pack Nail-in Cable Clips Cord Organizer

  • Nail-in cable organizer provides snug and secure placement of an LMR 240, RG8X, RG58 or RG59 coax cable, RG6 digital video coaxial cable, digital audio coaxial cable, Ethernet Cat 5 or Cat 6 network cable, 12 to 16 AWG speaker wire, phone wire, USB cable, or slim video cable.
  • The cord holder supports most cables with a 7mm outside diameter or smaller.
  • Handy cord management alternative to wire mold, raceway, cable holder, or conduit.
  • Ideal solution for routing cables such as a short run TV coaxial cable in a home theater setup or a long run antenna cable in an office warehouse.
  • Organize and route cables along baseboards or wood trim molding with these cord clips.
  • Run cables in tight spaces around door frames through the wire clips with the confidence that they will remain in place.
  • Secure cable management clips prevent tripping hazards for kids or pets.
  • The cord keeper secures most round electrical cords of small appliances and electronics to prevent accidental disconnection and provide a clean looking installation.
  • Convenient 200 pack wire holder clips come in a plastic container to store spare cable clips in your tool box or garage.
  • One piece cable clip with an integrated nail with no extra parts to lose.
Check Stock

D-Line 18\ One-Piece TV Cord Cover White, Half Round Cable Raceway, Desk Cable Management Solution, Decorative Cable Concealer - 2\ (W) x 1\ (H) x 18\ Length

  • ...-install, no prior DIY or electrical know-how is required to install. D-Line Raceway is produced from high grade pvc, cable hider lengths can be easily cut to size (if required). Each D-Line cord cover length is supplied with strong self-adhesive backing, simply peel and stick D-Line cable raceway to a smooth clean surface, open hinged hid & snap shut utilizing patented click-lock lid..
  • D-Line TV Wire Hiders are available in a range of colors, however for the perfect finish D-Line Cable Raceway is fully paintable. To paint.
  • simply key the cable cover with a fine sandpaper & apply two coats of paint!.
  • To cover cords around a variety of popular angles, compatible D-Line wire cover accessory multipacks are also available. Design of D-Line Clip-Over bends & tees forgives any imprecise cuts or measurements, while Smooth-Fit connectors & end caps internal shoulders fit securely under lengths, leaving a smooth-flush finish. One-piece design of D-Line half round cable raceway, avoids need to cut lid & base separately..
  • Each pack includes: 1x D-Line 2" (W) x 1" (H) x 18" Half Round White Cord Hider Length. 18" length sufficient for common TV wall mount installations, however longer 39" Lengths are also available..
Check Stock

Triple Album Collection Vol 2

  • 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
  • Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check Stock

Corner Duct Cable Raceway - On-Wall Raceway Kit - Wall Corner Black/White/Beige - 5 feet in Length

  • Manufactured of a strong, durable, lightweight, UL 94-VO & UL 62DB compliant and flame retardant PVC Plastic | UL 5A specification for 600 volt applications. | One inch minimum bend radius accessories available for Category 5e,12 and fiber optic installatns..
  • Triangular corner raceway blends into wall/ceiling junctions to provide clean, finished appearance. FOR BEST RESULTS - Prior to Installation.
  • Clean wall surface, after installation allow 48 - 78 hrs for adhesive to cure before adding cables. Depending onocation (ceiling), surface type, and weight, additional adhesive or screws can be used for permanent installation.n.
  • Can easily be painted with any Latex based paint to help match any previously painted walls or ceilings.
  • Easy no-drill corner cable management solution. Great for condo/apartment dwellers or leased/temporary office space.
Check Stock

Klein 56206 Conduit Bender with Handle, 1/2'

  • 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
  • Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check Stock

Modway Conduit 7 Piece Patio Dining Set with Light Finish EEI-4015-LGR-MOC-SET

  • Refresh your alfresco space with the Conduit 7 Piece Outdoor Patio Dining Set. Bringing transitional style with contemporary modern flair to any outdoor area, Conduit Armchairs feature a powder-coated aluminum frame wrapped in synthetic UV-resistant wicker rattan. Foam padded cushion and waterproof cover offer a comfortable seat while dining or entertaining. The Conduit 70" Dining Table features a tempered glass tabletop provides a smooth, easy-to-clean surface ideal for dining and entertaining.
  • Set Includes: One - Conduit 70" Outdoor Dining Table, Six - Convene Dining Armchair Cushions.
  • Overall Product Dimensions: 120"L x 88.5"W x 34.5"HTable Dimensions: 38.5"L x 70"W x 30"HIndividual Armchair Dimensions: 25"L x 24.5"W x 34.5"HSeat Dimensions: 19.5"L x 19"W x 17"HArmrest Dimensions: 25.5"HBackrest Dimensions: 18"H.
  • Material: Square aluminium tube:40*40*1.5mm.
Check Stock