Top Conduit Swivel Clamps

8 Pack | 6\ Pre-Cut PVC Rooftop Support | Pipe Support | 100% Recycled PVC

  • Popular Rooftop Sleeper Support Already Pre-Cut to 6" (152.4 mm) Length | Cost Effective Rooftop Pipe Support Solution.
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

16 Pieces White Clamp for PVC Pipe Greenhouses, Row Covers, Shelters, Bird Protection, 2.4 Inches Long (for 1 Inch PVC Pipe)

  • What you can get: you will receive 16 pieces white grip clamps.
  • Appropriate size: the size of this grip clamp is approx. 2.4 inch in length, 1 inch in inner diameter.
  • Hold material on tubular frame: this white grip clamp is made of PVC material, with nice strength and good toughness, safe and reliable, easy to remove from the greenhouse film, will not break easily.
  • Wide application: can hold many kinds of sheet materials, and suitable for various type of pipes, proper for creating cold frames, greenhouse, shelters, row covers, etc.
  • Practical tools: these grip clamps are compatible with many types of pipes, including PVC or metal conduit.
  • Some applications include greenhouses, row covers, shelters, bird protection, dog beds, quilting frames and more.
Check Stock

PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability..
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
  • ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
  • ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check Stock

OEMTOOLS 25198 Hose Clamp Pliers Set, 2-Piece

  • Includes Flat-Band Hose Clamp Pliers and Angled Hose Clamp Pliers.
  • Thick, Double-Dipped Handles for a Comfortable and Firm Grip.
  • Services Most Ring-Type or Flat-Band Hose Clamps.
  • Jaws Swivel to Access Hose Clamps in Any Position.
  • Clamps Are Held Open with a Ratchet Locking Mechanism.
Check Stock

9 Pack | PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability..
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

Morris 19426 Heavy Duty Rigid Pipe Strap, Steel, 1 Hole, 1\ (Pack of 25)

  • Overall Size: 155x 30 x 80mm/ 6.10" x 1.18" x 3.15"(L*W*H).
  • Special slotted design makes it more sturdy and not easy to deform.
  • Made from 304 premium stainless steel material. Anti rust, anti-corrosion. Clamps are sturdy, strong and reliable.
  • The surface is super smooth and burr-free with the fine workmanship.
  • Use to secure rigid or IMC conduit to wood, masonry, widely used in stainless steel pipes, rubber hoses.
Check Stock

Tork 2002 Photo Control, Thermal Type Photocell, 1/2' Conduit Mounting with Swivel, 208-277V

  • Tork 2002 - Photo Control - Thermal Type Photocell - 1/2 in. Conduit Mounting with Swivel - 208-277 Volt.
Check Stock

MRbrew Efficient Adjustable Beer Faucet Kit, Adjust/Control/Regulate Beer Flow Rate, Heavy Duty Commercial Brewing Kegging Stainless Core Adjustable Draft Kegerator Keg Tap Kit for Beer Tower Shanks

  • 1.Include: Beer Keg CO2 Regulator CGA320, Red Gas Line, Worm Clamps, 5/16" Swivel Nuts, Ball Lock Gas Disconnect MFL.
  • 2.Material: PVC Material for Gas Line, Stainless Steel Material for Clamps, CO2 Regulator and Swivel Nuts, Plastic Material for Ball Lock Disconnect.
  • Connect tips: Tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak.
  • 4.Gas Gauge: 0-60 PSI and 0-3000 PSI, Manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator.
  • 5.Guarantee: Quality Guarantee, any problem for CO2 Regulator with ball lock and gas line set, Money Back or Replacement free..
Check Stock

Intermatic LC4536C 120VAC to 277VAC Locking Thermal Photocontrol

  • Replacement photocell for use with NSi Industries DGU-A and DGLC-A series time switches.
  • 1 to 100 foot candle light level sensitivity for varying light levels.
  • Impact-resistant enclosure for durability.
  • Dome and base ultrasonically welded for maximum strength.
  • Mounting for 1/2" conduit with 180-degree swivel.
Check Stock

IRWIN VISE-GRIP Locking Pliers, Welding Clamp, 9-Inch (25ZR) (Pack of 4)

  • LOCKING C-CLAMP SET: A 3 piece set of imperial C-clamps with precision screw adjustable locks and trigger releases in the most convenient sizes you’ll ever need – 1 x 6” fixed pad, 1 x 6” swivel pad and 1 x 11” swivel pad..
  • COMMERCIAL GRADE CHROME VANADIUM STEEL: Our C-clamps are drop-forged from chrome vanadium steel with nickel plated finish to withstand long-term corrosion for real durability. That’s made to last the distance..
  • BUILT TO LAST: Whether you’re a professional mechanic or a handyman looking to complete your tool kit, you need a set of these premium quality C plier set in your kit. Work great as welding clamps too..
  • ROLL-UP POUCH: We’ve included a handy numbered nylon pouch for your clamp set. It rolls up for easy storage or transportation, and can also be hung up for quick access. A bright orange internal lining finishes off this sturdy clamp organizer for easy visibility..
  • SATISFACTION GUARANTEED: At Kendo tools we stand by the quality construction and durability of all our products. We are fully committed to customer satisfaction with a lifetime warranty against any manufacturer defects..
Check Stock

9pc Hose Clamp Pliers, Hose Clamp Remover Kit with Flexible Wire Long Reach Hose Clamp Clic R Type Swivel Jaw and Flat Band Pliers for Automotive Coolant Radiator Heater and Water Hose

  • COMPLETE HOSE PLIERS SET: This universal 9-piece hose clamp pliers set from OMT includes long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines.
  • PERFECT FIT: Each pair of our well-engineered hose pliers works with hose clamps from 11/16 inch to 2-1/2 inches: the flexible hose clamp pliers, the swivel jaw band clip and spring wire clip pliers, and regular and angled flat band hose clamp pliers for spring-type clamps.
  • the Clic-R collar pliers for ear-type clamps.
  • and the hose removal pliers for most standard clamps.
  • LOCKING DESIGN: The user-friendly locking mechanisms of the 5 spring clamp-compatible pliers keep your clamps held open, freeing your hands and speeding your work.
  • DURABLE & COMFY: Our clamp pliers are constructed from durable structural steel, blackened to offer you maximum strength and corrosion resistance.
  • the easy-grip rubberized handles reduce fatigue during use.
  • and the sturdy blow-molded case keeps everything organized and portable.
Check Stock