Top Conical Tip Saw Blade

Victorinox 40141 Slicer Knife W/ 12 Granton Edge Blade, Rosewood Handle-40141

  • 12-inch Granton Edge Slicing Knife with safe, rounded tip. Gives long, straight edge to maximize cutting surface, granton edge to prevent sticking to the knife..
  • High-carbon stainless-steel blade. conical ground for a wider break point.
  • Blade stamped from cold-rolled steel. Bolsterless edge for use of entire blade and ease of sharpening..
  • NSF approved. Rust and stain free. Perfect for home or commercial use, or as a Gift..
  • Hand washing recommended. lifetime warranty against manufacturer defects.
Check Stock

QWORK Multifunction 12” Mitre Box with 14” Back Saw 45° hole slot

  • Size: 12" Mitre Box , 14" Back Saw, 45° hole slot..
  • Durable: The saw blade is made of premium steel, double-sided mechanical grinding, wear-resistant, and absolutely sharp..
  • Ergonomic design: The handle of the saw is made of ABS engineering plastic and TPR plastic for a comfortable grip and save labor..
  • Safe to Use: The gap of the chute box is 2cm, the thickness of the saw is 1.2cm, when using the saw, the saw will not cut into the box..
  • Use Tip: Use the sides of the box to line your saw up with the correct angle. Score your cut with the saw first, making sure the cut will be on the waste side of the mark. Then, proceed to use the saw normally to cut through your piece..
Check Stock

Tool School: The Complete Guide to Using Your Tools from Tape Measures to Table Saws

  • Micro-Make Super Value Packages Are An Economical Way To Expand Your Workshop Or Get Involved In A New Hobby..
  • Take our best-selling saw, add some of our most popular accessories for it, and what do you get? A versatile mini woodworking and metal cutting workstation like no other..
  • Package includes: MicroLux Tilt Arbor Table Saw, 40 Tooth Carbide Tip Saw, Taper Jig, Ripping Gauge Set, Featherboard and Fence Set Blade, Angle Setter/Protractor, Ferrous Cut-Off Disk, and Blank Blade Plates.
  • Value if purchased separately is $529.60!.
Check Stock

5-4/5' 52 Teeth Carbide Tip Circular Saw Blades Radial Arm Saw Blade Table Saw Blade Miter Saw Blades with 4/5' Arbor for Woodworking

  • Saw Blades Specifications - 5-4/5" Ultra-thin kerf Wood Cutting Circular Saw Blade for fast cutting, Teeth: 52T, Diameter: 5-4/5"/ 147mm, Arbor: 4/5"(20mm), HI-Density Carbide Tip for Maximum Performance.
  • MAX RPM - 10000, Kerf: 0.055"/1.4mm, Hook Angle(forward): 20 Degree, Tooth design: ATB, Fast and Smooth Cuts..
  • ATB Tooth Design to facilitate splinter discharge and to prevent the saw blade from being blocked by sawdust, make cutting easier. Extra-hard steel blade body - delivers accuracy and resists bending and deflection for true cuts..
  • Laser cutting Anti-Vibration Slots can drastically reduce vibration and sideways movement during the cutting process, Also help channel heat build-up during the cutting process, allowing the blade to expand and contract, extending the blade life..
  • Upgraded to Teflon surface coating, strong non-stickiness, lowest friction coefficient, anti-adsorption, high-temperature resistance. Smooth and efficient rotation..
  • Ideal for ripping and crosscutting on softwood, hardwood, plywood, chipboard with fine finishing, not for metal cutting. Widely use for Circular Saws, Miter Saws, Table Saws, Hand Saws, and Chop Saws, save your time and energy..
Check Stock

Folding Pruning Hand Saw 5 Inch Camping Wood Mini Small Saw Garden Tree Saw Japanese Pull Razor Teeth Saw Durable for Wood Branches Bone Camping with SK-5 Steel Blade.

  • Bright and long service life Sharp durable saw blade:Blade choose5.1" SK-5 steel blade, made in Korea and 1.2mm thick, after high frequency hardening,the hardness of the blade body reaches 51-52 hrc and the tooth tip reaches 64-67 hrc,designed to two staggered rows of triple-cut razor teeth ( 7 TPI ),and use grinding process and chrome-plated surface treatment..
  • Elevated branches can be cut diagonally:Two gear adjustment:It has two latching positions to lock. One is 180 degrees and the other one around (180 + 30) degrees making it super easier for holding..
  • Easy and fast blade replacement:The black screw of the saw is just sized to hold a coin, allowing a coin to replace a screwdriver to replace the blade..
  • Time-saving and labor-saving handle:TPE non-slip Handle,Ergonomic and durable rugged handle feels comfortable..
  • afe and portable for easy storage:The blades of our folding camping saw fit perfectly with the handle, so no teeth are exposed when closed,and the box has hooks for easy storage..
Check Stock

Huanyu Mini Table Saw Upgraded 300W 13000RPM Portable Precision Table Saws Set for DIY Crafts Woodworking 0-180 Angle Cutting Multifunctional 1.14IN Cut Depth 7-Level Speed Adjustable (Group 3)

  • Tip: Different materials need to be cut with different saw blades.
  • This is a small amateur table saw, so it is not suitable for cutting longer and thicker materials, such as hardwoods like walnut, oak, birch, etc.
  • The size of the material to be cut does not exceed the size of the panel 10x10cm/3.9x3.9inch and the thickness of the material to be cut does not exceed 19/32inch..
  • Application: You can use this portable mini table saw to make woodworking and crafts. With 4 types of saw blades, meet your need to cut various materials: Metal materials such as Iron, Aluminum alloy and stainless steel.
  • Wood materials such as thin wood, small wooden sticks, etc..
  • Adjustable: 96w 7-speed regulating power supply, you can adjust the cutting speed according to your needs.
  • The height of the saw blade from the table is adjustable, ranging from 0-19/32 inches.
  • The cutting depth is adjustable, ranging from 0-1/2 inches, not exceeding the height of the saw blade 19/32 inches..
  • Portable:This table saw is very mini and portable, 7x5.5x3.
Check Stock

Sili Saw Blade Sleeve • 10 inch Saw Blade Protector • Protects 10 inch Table Saw and Circular Saw Blades

  • If you’re like most DIY’ers or woodworkers, you have a few saw blades laying around your garage or workshop. You could make a saw blade rack out of scrap lumber or maybe stack the blades in a corner exposing your blade cutters to getting chipped. The best solution is to protect your blades by simply slipping a blade into a Sili Saw Blade Sleeve. Once in a sleeve, you can hang your blade up and out of the way! All the while protecting you and your saw blade from harm while its not in use..
  • Made from a softer silicone rubber material, the Sili Saw Blade Sleeve is perfect for protecting your saw blades. While some blades are inexpensive compared to others, why not protect your blades from the daily rigors of job site or workshop use to get the absolute most out of them. The silicone material neatly wraps around the teeth of your saw blade and won’t mark or mar the blade..
  • These are the ideal storage solution for contractors. With each of your blades protected with a Sili Saw Blade Sleeve, you’ll know that when you get to the next job your blades are ready to go! No more changing blades and seeing a chipped tooth or two rendering the blade useless. Not only will the Sili Saw Blade Sleeves save you time, but they’ll save you money by cutting back ....
Check Stock

12 Inch Stainless Steel Reciprocating Saw Blades for Meat 3TPI Big Tooth Unpainted Reciprocating Saw Blades for Food Cutting Big Animals Frozen Meat Beef Sheep Cured Ham Turkey Bone - 5pack

  • 【INCLUDE】5-piece of 12-inch Unpainted stainless steel meat saw blades, 3 teeth per inch. Most important it's safe for cutting food. at the same....
  • 【MAIN USE】Stainless steel reciprocating saw blade, special design for cutting frozen food, meat, hamburger meat, beef, sheep, fish, cured ham,....
  • 【SAVE TIME】12-Inch stainless steel reciprocating saw blade is very good for the big jobs like splitting and quartering large animals, can save a....
  • 【DURABILITY】Ultra hardened cutting edge for up to five times longer life than standard blades,Sharp tip makes it easy into any corner for cutting....
  • 【UNIVERSAL SHANK】Works with all major reciprocating saw brands such as DeWalt , Hitachi , Milwaukee, Makita, Ridgid, Porter & Cable, Skil, Ryobi,....
Check Stock

Metabo HPT Jig Saw, Variable Speed (CJ160V)

  • Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
  • Includes: CJ160V Jig Saw, No. 41 Jig Saw Blade (725389), No. 42 Jig Saw Blade (725379), No. 123X Jig Saw Blade (x10) (725394), Allen Wrench (944458), Splinter Guard (338994), Chip Cover (338996), Dust Collection Adapter, Sub Base, Carrying Case.
  • Auto-mode feature runs the tool at half power and ramps up to full power once a load is detected for easier starts, less vibration and more control.
  • 7. 0 amp motor, intense power for the toughest woodworking jobs.
  • Electronic speed control maintains SPM while cutting.
  • Stroke length of 1-1/32", Ideal for many woodworking applications.
  • Tool-less blade changing system for quick and easy blade replacements.
  • Multi-position switch, to angle blade for beveled cuts.
  • Included Components: Cj160V Jig Saw, No. 41 Jig Saw Blade (725389), No. 42 Jig Saw Blade (725379), No. 123X Jig Saw Blade (X10) (725394), Allen Wrench (944458), Splinter Guard (338994), Chip Cover (338996), Dust Collection Adapter (321591), Sub Base (339018), Carrying Case (339017).
Check Stock

Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4\ x 3/8\ Miter Slots • Also Works with Many Router Tables and Band Saws

  • Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate..
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence..
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can....
Check Stock

Magic Saw Set Kit, 9 in 1 Hand Saws Woodworking, Multi Tool Blades Universal Hacksaw Kit, Coping Saws for Woodworking, Cutting Wood, Plastic, Glass, Tile, Metal, Rope, PVC Pipe, Rubber

  • Work as magic saw set kit, magic hand saw, magic saw kit, the magic saw, magic handsaw set, magic hand saw set, magic saw multipurpose magic saw.
  • Use as multi purpose magic saw, magic saw blades, magic saw set, magic saw multipurpose, magic saw 6 blade, magic saw multipurpose cutting tool, hand saws woodworking, coping saw blade.
  • Work for whole saw kit, folding camp saw, saw zaw blade, coping saws for woodworking, panel saw kit, hand saw kit, steel chop saw, mitre saw 12 inch, bow saw blade.
  • Use for metal cutting saw blade 14, scroll saw wood, folding saw survival, camping bow saw, bow saw blades, straight flush saw, hole saw kit wood, coping saw blades for wood.
  • Suit for door jamb saw, hacksaw blades for metal, handsaw for metal, hack saw metal, coping saw for wood, hacksaw for metal cutting, metal coping saw blades.
Check Stock

KingTool 3 in 1 Multi Blade Hand Saw - 12-Inch Solid Frame Hacksaw, 14-Inch Universal Handsaw and 10-Inch Standard Utility Saw

  • KingTool 3 in 1 hand saw including 12-Inch solid frame hacksaw blade, 14-Inch universal handsaw blade and 10-Inch standard utility saw blade, and a shared handle for cutting a plastic, metal, pipe, particle board, and wood..
  • The installation is easy and simple, and the saw blade can be installed in 3 seconds at the fastest. Ergonomically designed bi-material handle for comfort and control..
  • Solid Frame Hacksaw - A 24inch teeth Bi-Metal hack saw blade and a 18 teeth hack saw blade are included in this 3 in 1 saw set. Adjustable flush cuts at 90° and 180° angles.
  • Universal Handsaw - A 14”/355mm 7TPI/8TPI universal handsaw blade is included in this 3 in 1 hand saw set..
  • Standard Utility Saw - A 10”/255mm 7TPI/8TPI standard utility saw blade is included in this 3 in 1 hand saw set.Each saw features Tri-Ground teeth to give you fast, efficient cuts.
Check Stock