Top Connect Coupling Tool Fastening

uxcell 8mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/1.31 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Aluminum Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock

Shankly Mechanical Oil Pressure Gauge Kit Compression Tester - Professional Engine Compression Testing Kit or Gauge Oil Pressure

  • ✅ OIL PRESSURE GAUGE KIT: Shankly's oil pressure gauge is used to monitor the oil pressure in your vehicle. This pump tester prevents you from engine failure, broken hose, or leaking gasket due to lack of oil. Great to have in your toolbox.
  • ✅ DURABLE & GREAT QUALITY: Shankly's oil pressure gauge line is well protected by a rubber bumper and a decent length of hose. It comes with spare orings adaptor and with quick connect couplers, making this a reliable tool and long lasting.
  • ✅ UNIVERSAL: This oil pressure tester includes a 90-degree coupling adapter for limited access applications. This is also fitted with quick coupling adaptors and 1200mm of hose that will serve a mechanic effectively for a very long time.
  • ✅ CONVENIENT HANDY CASE: Shankly's oil pressure tool comes in a convenient case, making transportation, storage, and organizing a snap. This oil pressure gauge line kit works perfectly for your setup.
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this oil pressure test kit will arrive in your place in good condition, If any issues occur, feel free to contact us.
Check Stock

RIDGID 52822 Model T-232 H-D 3\ \C\ Cutter Cable Coupling Drain Cleaning Tool

  • CUTTER DRAIN CLEANING TOOL: Built to effectively clean and clear even the toughest blockages of debris, grease, and other general material clinging to the walls of pipes.
  • EFFECTIVE AND SIMPLE: Works by grabbing debris and twisting it onto the head of the cables for easy wall-to-wall cleaning and features a fast locking end for easy and quick replacement as needed during use.
  • CABLE COUPLING: Can fit 3/8-in. drum and 5/8-in. sectional cables including C-4, C-6, C-7, C-9, all IW cables, and more.
  • QWIK LOCK FILTER FASTENING MECHANISM: Allows for easy installation and removal, push down to install into the vacuum and pull up to remove.
  • COMPATIBLE MACHINES: Made for use with the RIDGID K-400 Drum Machine, the RIDGID K-3800 Drum Machine, or the RIDGID K-50 Sectional Machine.
Check Stock

CUFEAL 3-Pack 400mm / 15-3/4\ Long Straight Pipe lamp stem Black Finish Lamp Rod Kit with Couplings (M16)

  • Made of iron,total length of 3 lamp rod connected is about 47 inches,black paint anti rust process.
  • 400mm/15.75“ long ,16mm/0.63" outer diameter lamp rod is hollow to slip lamp wire through..
  • Couplings included, double coupling use to connect 2 lamp rod together perfectly, single coupling use to connect lamp rod to base or lamp fixture..
  • Good ideal for DIY making, repairing, and restoring lamps..
  • Contains: 3x Lamp rod, 2x Double couplings, 2x Single coupling, 2x Pipe thread,2x locknuts.
Check Stock

LKONWEE 37300 Fuel and AC Line Disconnect Plier, Fuel Line Connector Removal Tool for Replacing Fuel Filters

  • Use with 5/16 inches, 3/8 inches or 1/2 inches adapters from the Lisle 37000 or 39400 disconnect tool sets.
  • Also works with other fuel and ac line disconnect tools Red rubber handles.
  • Features a unique design providing extra leverage when disconnecting quick connect coupling air conditioning and fuel lines.
  • Premium Solid steel material construction offers strength and durability ,plastic handle, soft and comfortable..
  • The pliers' forks have different sized openings so the tool can be turned around to fit single or two step collar designed connector lines..
Check Stock

DEWALT 20V MAX Tool Connect 1/2' Mid-Range Impact Wrench with Hog Ring Anvil, Tool Only (DCF896HB)

  • 330 ft-lbs of max fastening torque and 600 ft-lbs of max breakaway torque to complete a wide variety of applications..
  • Compact design of only 6.95" and 3.48 lbs allows access to tight spaces and reduces user fatigue..
  • 3 fully customizable modes allow you to personalize your impact wrench through the Tool Connect™ app including setting: Speed, LED brightness and delay, Precision Wrench™ Control and Precision Tap™ Controls..
  • Precision Wrench™ allows user to set runoff speed in reverse helping to prevent fastener runoff. In forward, users can set pause before impact and auto shut off times to aide in fastening consistency..
  • Precision Tap™ automatically alternates the tool between forward and reverse allowing for easier and faster cutting of threads (vs. manual tapping)..
Check Stock

4 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver.

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【High cost performance】Ancirs flange coupler is packaged with 4 pack 8mm Flange Shaft Coupling + 4x M3 Mini Hex Wrench + 8 x M3 Fastening Screw..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm..
  • 【100% Satisfaction Guarantee】 If you are not completely satisfied with ANCIRS Flange Coupling Connector, just contact us through Amazon message and we will provide feasible solution for you as promised..
Check Stock

Fein Turbo II X AC HEPA Professional Wet/Dry Dust Extractor Vacuum Cleaner - 1100 Watts, 153 CFM Suction Capacity, 98 PSI Static Water Lift, 31.9 Pound Weight - 92030060990

  • Outstanding Performance - It offers fully automatic filter cleaning for long service life of the specially designed HEPA filter. Good for use with power woodworking tools or for car vacuum detailing or even to keep your carpet or upholstery cleaner..
  • Further Reach - The Turbo II has a large range due to its 25 ft power cord and 13 ft long reach vacuum hose and offers ergonomic transport thanks to push handle, case and accessory fastening..
  • Industry Made - It has an autostart outlet with power-on delay to prevent current spikes, anti-static function against electrostatic charging, and tool coupling with suction control for easy control of suction power..
  • Convenience + Versatility - Our practical storage area with rim lets you leave your tool bag on top as you move around or have a DIY cyclone dust extractor addition. The accessory set offers the ideal equipment for many applications..
  • Specifications - 1100 Watts, 153 CFM Suction Capacity, 98 PSI Static Water Lift, 9.2 Gallon Capacity, 70 dB Sound Pressure Level and 31.9 lbs Weight..
Check Stock

Sydien 4 Pcs 8mm Rigid Flange Shaft Coupling Motor Guide Shaft Coupler Connector with Set Screws & Wrench

  • Metal: Fine plating metal, hardened by heat treatment, and then electroplated..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily..
  • Package: 4Pcs Flange Shaft Coupling + 1Pc Mini Hex Wrench + 10Pcs Fastening Screw..
Check Stock

BokWin 8mm to 8mm Inner Dia Universal Steering Shaft U Joint Coupler 2Pcs

  • 【Material & Package 】: Nickel-coated iron.
  • 2Pcs 8mm to 8mm universal joint shaft coupling, 4Pcs fastening screws..
  • 【Function】: Can be used in model airplane boat, robot, RC modelmotor etc..
  • 【Widely Used】Universal joint shaft coupling is produced based on International Flange Standard, widely used in model shaft connection.
  • 【Dimensions】: Bore Diameter: 8mm to 8mm (0.31inch to 0.31inch). Thread Size: M4.
  • 【QUALITY AFTER-SALE SERVICE】: If you do not 100% satisfied with our products or if you have any questions, you can contact us anytime. BokWin would solve all the problems to your satisfaction. FREE REPLACEMENT or REFUND within 90days..
Check Stock

Performance Tool W83149 Universal A/C & Fuel Line Disconnect Set

  • Easily disconnects air conditioning lines and quick connect fuel lines.
  • Set contains six release tools that disengages the spring lock coupling on Ford and Chrysler air conditioning lines.
  • Disengages the spring lock coupling on gm, Ford, and Chrysler fuel lines.
  • 5/16 inch disengages the spring lock coupling on Ford radiator and transmission lines..
  • Includes the following sizes: 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 7/8 inch..
Check Stock

BENLIUDH 4 Pcs Universal Joint Shaft Coupling 4mm to 6mm Inner Dia U Joint Coupler with Screws for Motor

  • Material：Universal joint shaft coupling is made of nickel-coated iron，much stronger, wearproof, Long service life。.
  • Dimensions：Inner Diameter: 4mm to 6mm，Outer Diameter: 11mm/0.43”；Height: 24mm/0.94”。.
  • Package Include：4 x universal joint shaft coupling, 1x hex wrench, 8 x fastening screws。.
  • Application: The universal joint is suitable for the use of the straight shaft of the motor, and is suitable for the use of various metals such as model cars, model boats, and robots，It is suitable for various general machinery occasions。.
  • It Can be bent at any angle (rotation angle is 45 degrees), and the universal joint can change the transmission direction at any angle。.
Check Stock