Top Connected Motor

Minn Kota Trolling Motor Power Center

  • This battery box / power center contains easy access external battery terminals that allow trolling motor leads and charger leads to be connected to the battery posts without opening the box.
  • Protects your battery (not included) on a small boat, transom application (boats that do not have battery compartments).
  • Built-in, push button battery meter with 4 LEDs displays current “state of charge”.
  • 60A resettable circuit breaker connected to top.
  • 10A resettable circuit breaker connected to two accessory ports.
  • Ring terminals on inside battery connectors.
  • Compatible with group 24 and 27 size batteries.
  • Overall dimensions: 7" x 13.5" wide x 12" tall.
Check Stock

The Prophecy Vol. 2

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, equipped with safety switch.
Check Stock

ESC With Brake,320A Brushed ESC Electronic Speed Controller With Brake for RC Car Boat

  • 【Used for】This 320A brushed motor ESC can be used for RC car/boat.This Brushed Motor Speed Controller with 3S (12V), suitable for no more than 380 motor. Using 2S (8.4V), suitable for no more than 540 motor..
  • 【Quick Response】320A Brushed ESC Speed Controller with High-frequency drive system, quick response.Built to meet standard specification, strictly follow factory quality control..
  • 【Feature】320A ESC can provide 320A forward or 160A back ward instantaneous motor current when connected to motor..
  • 【Excellent Performance】320A Brushed ESC Conform to strict quality control standards, dependable to use.Electronic Speed Controller Manufactured according to the original specifications..
  • 【Standard Specification】ESC Brushed Electric Speed Controller,Automatically fine the center position of the accelerator.Made in strict accordance with standard requirements..
Check Stock

Carbon Motor Brushes, 0.3×0.7× 0.71 Inch 044 Electric Motor Carbon Brush Replacement 20 Pcs

  • PERFECT REPLACEMENT---These carbon motor brushes are perfect replacement for the broken one, 20 pcs per set, practical and economic.
  • STABLE PERFORMANCE---These carbon motor brushes are conductive and of good thermal conductivity, durable in using, stable performance will not dispoint you.
  • SUITABLE FOR---These carbon motor brushes are suitable for an electric motor, the coils of the rotor must be connected to complete an electrical circuit.
  • CARBON ALLOY MATERIAL---These carbon motor brushes are made of high quality of carbon and alloy, with superior performance, durable in using.
  • SUPERIOR AFTER SALE SUPPORT---Please feel free to contact us for your any problems about our product. It is our pleasure to service you. Do not doubt your importance to us.
Check Stock

110V 800w vfd Spindle Package：110V 1.5KW VFD+110V 800w Φ65mm ER11 Water Cooled Spindle Motor+110V Water Pump+65mm Clamp +5m Water Pipe

  • 【Connection way】The package only supports 110VAC(+/-10%) single phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor（pin1=U,pin2=V,pin3=W,pin4=ground）.
  • 【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product.
  • 【Package Include】1 x 110V-2.2KW VFD, 1 x 2.2KW Φ80mm 24000RPM ER20 Spindle .1 x 110V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe..
  • 【Wide range of applications】The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc..
  • 【Warranty】1 Year replace(The spindle is half a year). Spindle Warranty :Half a year If there is an alarm in the product and you do not know how to operate, please contact the seller.
Check Stock

Yosoo Health Gear 20PCS Carbon Motor Brushes, Electric Motor Brushes, Replacement Angle Grinder Brush for Power Tool Repair Parts

  • [Carbon Motor Brush]: A sliding contact used to transmit electrical current from a static to a rotating part in a motor or generator, and, as regards DC machines, ensuring a spark-free commutation.
  • [Great Replacement]: Carbon motor brushes are one of the most commonly replaced power tool components.
  • The replacement angle grinder brushes can restore a motor's electric braking.
  • [Material]: These carbon motor brushes are made of high quality of carbon and alloy with excellent conductivity, superior performance and durable in using.
  • [Application]: Suitable for an electric motor or generator to function, the coils of the rotor must be connected to complete an electrical circuit.
  • [100% Satisfaction]: If you have any question about this item, please feel free to contact us, we will help you within 24 hours on weekdays.
Check Stock

100 Carbon Brushes, 20PCs 5×8×16 mm Electric Motor Drill Carbon Brush Replacement with Great Conductivity, Carbon Brush Set

  • These carbon motor brushes are suitable for an electric motor or generator to function, the coils of the rotor must be connected to complete an electrical circuit.
  • These carbon motor brushes are conductive and of good thermal conductivity, durable in using, stable performance will not dispoint you.
  • These carbon motor brushes are perfect replacement for the broken one, 20 pcs per set, convenient to replace the carbon brush.
  • These carbon motor brushes are made of high quality of carbon and alloy, with superior performance, durable in using.
  • Please feel free to contact us for your any problems about our product. It is our pleasure to service you. Do not doubt your importance to us.
Check Stock

defoo 61973 61971 Carbon Motor Brushes Suitable for Harbor Freight-Chicago Electric HarborFreight HF 10 in. Miter Chop Saw

  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor..
  • Replacing brushes can fix an intermittent motor. New brushes can restore a motors electric braking..
  • The coils of the motor must be connected to complete an electrical circuit for right use. Carbon brush is a item easy to broken when it working..
  • MONEY-BACK GUARANTEE: For any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked..
Check Stock

LGDehome 10PCS DC 5V-36V 15A(Max 30A) 400W Dual High-Power MOS Transistor Driving Controller Module FET Trigger Switch Drive Board 0-20KHz PWM Electronic Switch Control Board DC Motor Speed Controller

  • continuous current 15A at normal temperature.
  • The maximum current can reach 30A under auxiliary cooling conditions..
  • Trigger signal source: digital high and low level (DC3.3V--20V), can be connected to single-chip IO port, PLC interface, DC power supply, etc., can be connected to PWM signal, signal frequency 0--20KHZ support.
  • Adopt imported dual MOS parallel active output, lower internal resistance, large current, strong power, 15A, 400W at room temperature, meeting the needs of most equipment.
  • Application: The output can control high-power equipment, motor, bulb, LED strip, DC motor, micro pump, solenoid valve, etc. It can input PWM, control motor speed, lamp brightness, etc.
  • size: 1.34x0.7x0.5inch/3.4 x 1.7 x1.2cm(L*W*H).
Check Stock

ZEAK 3500 lb. Advanced 12V DC Electric Winch, Off Road Waterproof, Synthetic Rope, Mount, for Sports car, ATV

  • ...load line speed which drives a powerful pulling.
  • Waterproof IP65 powder coated surface for corrosion resistance, could be used even on extremly weather normally, with the durable 3/16 inch x 50 feet synthetic winch rope of high tensile strength that is enough to meet the needs of any outdoor towing jobs.
  • Each lead is connected to the other end of the corresponding lead, so that it is not easy to be confused, it's very convenient and quickly of connecting.
  • 12.9 inches shorter red lead and 13.3 inches shorter black lead connected to the motor.
  • 56 inches longer red lead and 68.7 inches longer black lead connected to the battery ( All leads: 9 Gauge ).
  • The winch will include a 7.2 x 5.1 inches (L x W) universal mounting plate to for mounting on the rear of the machine, the plate will require modifications to work for each specific machine, and a 26-32 feet range wireless remote.
  • From plowing snow to stacking wood, towing equipment, there's an endless list of accessories to your vehicles.
  • You can add the winch for wildcat, prowler, maverick, commander, defender, ranegade, outlander, rzr, ranger, general, sportsman, pioneer, talon, sxs, teryx, mule.
Check Stock

Dayton 1TDT2 Blower, 549 CFM, 115V, 2.05 Amp, 1640 RPM

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, equipped with safety switch.
Check Stock

HuXi FJ Series Electric Digital Lab Mixer Blender Variable Speed Electric Homogenizer Machine (FJ200-SH)

  • The drive motor adopts a series of miniature motor with large output power and compact structure, which is safe and reliable in design.
  • The working parts of the working head are made of high quality stainless steel and have good corrosion resistance.
  • The working head is connected to the drive motor by a coupling, which is easy and flexible to assemble and disassemble.
  • The speed control base adopts the stepless speed governor, which is convenient in speed control and stable in operation.
Check Stock