Top Connecting Fitting

Brennan 2403-08-08 Steel JIC Flared Tube Fitting, Straight, 1/2\ Tube OD JIC Male

  • Coupler for connecting two pipes in a straight run.
  • Fitting has JIC flared male connectors for connecting to female JIC pipes.
  • Made of steel for greater rust resistance than iron.
  • Operating temperature ranges from -63 to 400 F.
Check Stock

brennan - 183875 183875 2403-06-06 Steel JIC Flared Tube Fitting, Straight, 3/8\ Tube OD JIC Male

  • Coupler for connecting two pipes in a straight run.
  • Fitting has JIC flared male connectors for connecting to female JIC pipes.
  • Made of steel for greater rust resistance than iron.
  • Operating temperature ranges from -63 to 400 F.
Check Stock

2PCS Global Type C Cam and Groove Hose Fitting 2 Socket x 2 Hose ID Barbed with 2 PCS Camlock Gasket Fitting 2

  • Straight body with two openings for connecting two hoses or pipes with cam and groove fittings.
  • One female cam coupler end for connecting to male groove adapters and one hose shank end for connecting to hoses (Type C).
  • Aluminum for resisting corrosion and tarnishing.
  • Cam lock levers for locking the fitting's male groove adapter into female cam couplers.
  • Nitrile butadiene rubber seal rated for petroleum service, ethanol to E100, and biodiesel to B20.
Check Stock

RESTEK 20250 Compact Ferrule for Agilent Gas Chromatography, Graphite, Fit =0.28 mm ID (Pack of 10)

  • Coupling pipe fitting for connecting and extending pipes.
  • Female National Pipe Taper (NPT) threads on both ends for connecting male pipes.
  • Made from stainless steel 316 for strength.
  • Higher corrosion resistance than stainless steel 304.
  • NPT thread for compatibility with other threads.
Check Stock

Dixon G400-C-AL Aluminum A380 Global Type C Cam and Groove Hose Fitting 4 Socket x 4 Hose ID Barbed

  • Straight body with two openings for connecting two hoses or pipes with cam and groove fittings.
  • One female cam coupler end for connecting to male groove adapters and one hose shank end for connecting to hoses (Type C).
  • Aluminum for resisting corrosion and tarnishing.
  • Cam lock levers for locking the fitting's male groove adapter into female cam couplers.
  • Nitrile butadiene rubber seal rated for petroleum service, ethanol to E100, and biodiesel to B20.
Check Stock

Brennan 2603-06-06-06-FG Forged Steel JIC Flared Tube Fitting, Tee, 3/8\ Tube OD JIC Male

  • Tee with three openings for connecting and branching three pipes.
  • Fitting has JIC flared male connectors for connecting to female JIC pipes.
  • Made of forged steel for weldability, rust resistance, and durability.
  • Meets SAE standard 070401 for quality assurance.
Check Stock

JoyTube 5 Pcs Hose Barb Fittings 3/8 Barb to 1/2 NPT Male Thread Brass Metals Adapter Connector with Hose Clamp

  • Brass barbed hose fitting is for connecting 3/8" barb hoses, NPT male end used to connect 1/2" NPT female pipes fitting..
  • Made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, low magnetic permeability, ductility at high temperatures, which can withstand up to -40 to +160 degrees F..
  • When used with a hose clamp or crimp sleeve or ferrule, the hose barb fitting can creates a better tight seal..
  • Brass barbed fitting kits can be used with PVC, PU, Rubber hose or tubing, Which can apply to water, gas, oil and fuel as well as air tools..
Check Stock

GASHER 26PCS Brass Pipe Fitting Kit, Hex Bushing, Reducer Adapter, Hex Nipple, 90 Degree Barstock Street Elbow

  • 【DURABLE】Not a cast product, more robust and durable than castings. Max. pressure 150 PSI..
  • 【MATERIAL】 Durable solid brass construction is resistant to corrosion and long-lasting..
  • 【THREADS】 Male and Female National Pipe Taper (NPT) threads for connecting two pipes.
  • 【TEMPERATURE RANGE】 Operating temperature range of -65 to +250 degrees F..
  • 【INCLUDE】1 x 1/4 Tee Fitting, 4 x1/4 Elbow Fitting, 4 x 1/8 Elbow Fitting, 1 x1/4 Coupling, 1 x 3/8-1/4 Nipple & Reducer & Bushing, 1 x 1/4-1/8 Nipple & Reducer & Bushing.
Check Stock

Brennan 2603-04-04-04-SS, Stainless Steel JIC Tube Fitting, 04MJ-04MJ-04MJ Tee, 1/4\ Tube OD

  • Tee with three openings for connecting and branching three pipes.
  • Fitting has JIC flared male connectors for connecting to female JIC pipes.
  • Made of stainless steel for resistance to scaling and corrosion.
  • Operating temperature ranges from -425 to 1200 degrees F.
Check Stock

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Nut, 1/2\ Tube OD

  • Nut for connecting to a compression tube fitting.
  • Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304.
  • Maximum operating temperature range of -100 to +1,000 degrees F.
  • Meets ASTM A213 and A269 standards for quality assurance.
Check Stock

Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 3/8 x 3/8 Tube OD,50065-06

  • 90-degree elbow for connecting two tubes at an angle.
  • Female compression tube fitting for connecting to male threaded pipes.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to 250 degrees F.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Enema Kit Shower Tubing Anal Cleaning Reusable Douche Red Hose Nozzle(59 in)

  • √ Shower Thread: 1/2 Inch BSP (Standard thread size) fitting 99% of shower hoses..
  • √ This product is suitable for connecting the shower metal hose connector, not suitable for connecting the faucet..
  • √ The body feels comfortable and relaxed after the lavage..
  • √ About 5 minutes per lavage time.the most suitable water temperature between 40-43 degrees.
  • √ After receiving the product, please read the manual carefully twice and then operate. If you have any questions, please feel free to contact us..
Check Stock