Top Connecting Rod Bushing

Allstar ALL96478 Engine Connecting Rod and Piston Holder , Black

  • Engine connecting rod and piston holder measures 24 inch long x 12 inch wide x 9-1/2 inch tall.
  • This combination rod and piston holder safely supports piston and connecting rod assemblies during engine teardowns or assembly.
  • Slots are 4-3/4 inch long x 1-1/2 inch wide to accommodate most piston/rod combinations.
  • Assembly is required and can also be disassembled if desired after use for easy storage.
Check Stock

Camco Aluminum Anode Rod - Extends the Life of Your Water Heater Tank by Absorbing Corrosion Causing Particles - (11582)

  • Sacrificial Rod: Anode Rod extends the life of your water heater tank.
  • water corrodes the rod rather than your steel tank.
Check Stock

onlyfire 6002 Rotisserie Meat Forks 1-Pair for Grills-Fits 1/2-Inch Hexagon & 3/8-Inch and 5/16-Inch Square Spit Rods

  • Electric motor with waterproof on/off switch and auto reverse function. Cable length:36”..
  • Includes three steel rotisserie spit rod ( spit rod A:10",spit rod B:22.75",spit rod C:22.75"), counter balance, spit rod bushing,heavy duty 4-prong....
  • The onlyfire rotisserie kit comes with universal and OEM bracket set fits for Broil King, Broil Mate, Sterling, and GrillPro grills. It is a hassle....
  • Unique counter balance system included for rotisserie operation of unbalanced loads. Counterbalance for smooth turning and less motor wear..
  • Universal rotisserie kit, 45” x 1/2'' hexagon spit rod fits most grills with a cookbox up to 39" wide. 53” x 1/2'' hexagon spit rod fits most....
Check Stock

Belltech 9148 Nitro Drop 2 Shock Set

  • Designed for the daily driver to provide factory style ride comfort with better road feel and grip.
  • Application specific shock set designed for your vehicle.
  • Metal dust boot, hardened chrome 12.5mm piston rod, triple lip NBR rod seal, and teflon guide bushing.
Check Stock

Belltech 444SP Lowering Kit with Street Performance Shocks

  • Designed for the daily driver to provide factory style ride comfort with better road feel and grip.
  • Application specific shock set designed for your vehicle.
  • Metal dust boot, hardened chrome 12.5mm piston rod, triple lip NBR rod seal, and teflon guide bushing.
Check Stock

NEW 55-57 CHEVY FACTORY REPLACEMENT CLUTCH PEDAL CROSS SHAFT BOLT AND BUSHING KIT PUSH ROD TRI-5 1955 1956 1957 150 210 BEL AIR NOMAD SEDAN DELIVERY DEL RAY

  • Brand New Southwest Speed Factory Replacement Clutch Pedal Cross Shaft Bolt and Bushing Kit that fits 1955-1957 Tri-Five Chevy's with Manual....
  • This Southwest Speed clutch pedal cross shaft bolt and bushing kit are a reproduction of the original clutch pedal push rod bolt and bushing used on....
  • This kit includes a steel shoulder bolt, two delrin bushings, 3 flat washers, and an nylon locking nut > The shoulder bolt and bushings will look,....
  • Features: > Steel shoulder bolt with black oxide finish > Factory reproduction > Corrosion-resistant lock nut with nylon insert > Required for....
  • Applications: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1957 Chevy Del Ray > 1955-1957 Chevy Nomad > 1955-1957 Chevy....
Check Stock

Anderson Metals - 38110-2016 Brass Threaded Pipe Fitting, Hex Bushing, 1-1/4' Male x 1 ' Female

  • Hex bushing for connecting two pipes or with different diameters.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

T TANYA HARDWARE 1/8 x 1/4 Brass Hex Bushing Female Pipe x Male Pipe NPT Pack of 10

  • Hex bushing for connecting two pipes with different diameters.
  • Male NPT threads on one end and female NPT threads on the other for connecting pipes with different ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Brass Pipe Reducing Bushings are designed for use in water, oil, natural gas, and steam applications..
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Longacre® 52-32700 Standard Carb Throttle Linkage Kit, 23-1/4

  • Kit includes 2 all metal rod ends, aircraft aluminum tube, Holley carb bushing, 2 return springs, bolts and nuts.
  • You just bend to clear air cleaner, cut to length, thread one end (requires 1/4"-28 tap).
  • It easily forms to any car or use straight.
  • The 6061 T6 Heat treated aluminum alloy is tough to bend but stays to shape in use.
  • Throttle rod length is 23-1/4" and has a 1/4"-28 RH thread pitch.
Check Stock

PSI Woodworking PENPRESSXL Assembly & Disassembly Pen Press

  • Assemble and disassemble pen parts on one easy to use tool.
  • Acts as traditional pen press to press your pen parts together.
  • Disassembly function provides invaluable way to take virtually any pen apart.
  • Included components: (1) press assembly with adjustment sled and handle, (6) disassembly rods, (1) spring-loaded stopper, 6" of soft-grip tubing, (1) 7mm mechanism bushing for parts protection.
  • Spring-loaded ram acts as a 3rd hand for quick, easy parts positioning.
  • Sled mechanism slides the stop into position.
  • Locking lever then securely locks the rod in place.
  • The (6) disassembly rods handle nearly all tube diameters and parts configurations, including pen tips and clips.
  • Dedicated 7mm bushing allows for disassembly of any 7mm pen.
  • Soft-grip tube and V-profile clamp provides parts protection during disassembly process.
Check Stock

Legines Brass Pipe Fitting Hex Bushing 3/8 NPT Male to 1/4 NPT Female 1200psi 2pcs

  • Hex bushing for connecting two pipes with different diameters.
  • 3/8" Male NPT threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250....
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Two Hole Pins, 1/2 in - 1 15/16 in, Large Threaded (2 Pack)

  • 32Pcs Rotary tool mini cutting discs sets include 6pcs 22/ 25/ 32/ 35/ 44/ 50/mm woodworking thin cutting wheel +10pcs black mesh 32mm resin cutting wheel +10pcs 22mm emery cutting wheel +30pcs 22mm red polishing wheel + 1pc 1/8" connecting rod + 1pc 1/4 "connecting rod + 4pc 3mm connecting rod.
  • Mini saw blades made of high-hardness steel, hard texture, wear-resistant and heat-resistant, surface-plated emery, fine and uniform particles, rotary tool cutting disc can be used to polish or cut the surface of objects, high cutting efficiency and durability.003cbr/003e.
  • Rotary cut-off wheel kit has 6 assorted cutting discs set for different needs, HSS mini saw blades for wood and plastic / Diamond cutting wheels for stone / Resin cutting wheels for metal..
  • The cut-off wheels set + is suitable for all kinds of metal, wood, drywall, plastic, stone, ceramic, glass, hard alloy, the treasure jade stone processing and more / Ideal for cutting, grooving and trimming.003cbr/003e.
  • Compatibility: Shank cutting disc mandrels fit for most power die grinders or rotary tools & air tools.003cbr/003e.
Check Stock