Top Connection Terminal

AWBLIN Battery Terminal Connectors, 2PCS Quick Release Disconnect Multiple Car Battery Terminal Replacement with Hex Wrench, Positive Negative for SAE/JIS Type A Posts

  • 4WAY BATTERY TERMINALS: This Car Battery Connector Multiple has 4 post for wire connection. Well Designed for multiple cable connections. Wiring is easy to modify. Really Convenient wiring and firm connection. This Heavy Duty Battery Terminals can fit on round post auto batteries SAE/JIS Type A posts..
  • POSTIVE & NEGATIVE: Positive (19mm/0.75in) Battery Terminal Clamps + Negative (17mm/0.67in) Battery Terminal Clamps. The Positive Negative Battery Terminal ends is Suitable for Most Battery models. This Car Battery Cable Ends work great for replacing worn out and corroded terminals..
  • DIMENSION: For wires diameters 0.20in – 0.29in (AWG gauges 1 – 4) or section 16 – 35mm². Max wire clamp: 8mm/0.31in. After the Quick Release Battery Terminals installing battery, connects to the battery posts by pressing down the lever, so no tools needed. The Battery Post Terminals do easy to operation..
  • HIGH QUALITy: The Battery Terminal Ends are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss..
  • WIDE APPLICATION: These Automotive Battery Terminals can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries,RV etc. Just make sure that the Battery Clamps connect the correct....
Check Stock

Schumacher BAF-MT1 Zinc-Plated Marine Terminal Ends – Fits 3/8-inch and 5/16-inch Posts

  • DESIGNED FOR MARINE USE: Easily replace your boat battery’s terminal ends with a high-performance alternative..
  • RELIABLE: The Schumacher BAF-MT1 Zinc-Plated Marine Terminal Ends are three times more conductive than other terminal ends..
  • USABLE: The BAF-MT1 includes one positive 3/8-inch terminal end and one negative 5/16-inch terminal end..
  • BUILT GREEN: Meets the standards established for RoHS (Restriction of Hazardous Substances) compliance..
  • SUPERIOR CONSTRUCTION: The BAF-MT1 replacement Marine Terminal Ends feature heavy-duty zinc-plated construction..
  • LONG-LASTING QUALITY: Trust Schumacher Electric for reliable and well-made battery accessories. Schumacher has been producing quality automotive products since 1947..
  • EASY TO USE: The BAF-MT1 replacement terminal ends feature easy-to-tighten wing and hex nuts for a secure connection..
Check Stock

Car Battery Terminals Connectors with 4 Ways Battery Clamps Quick Disconnect Battery Terminal with Hex Wrench Tinned Copper,Positive&Negative Applicated in Car Truck RV etc.

  • 【4WAY BATTERY TERMINALS】This Car Battery Connector Multiple has 4 post for wire connection. Well Designed for multiple cable connections. Wiring is easy to modify. Really Convenient wiring and firm connection. This Heavy Duty Battery Terminals can fit on round post auto batteries SAE/JIS Type A posts..
  • 【POSTIVE & NEGATIVE】 Positive (19mm/0.75in) Battery Terminal Clamps + Negative (17mm/0.67in) Battery Terminal Clamps. The Positive Negative Battery Terminal ends is Suitable for Most Battery models. This Car Battery Cable Ends work great for replacing worn out and corroded terminals..
  • 【DIMENSION】For wires diameters 0.20in – 0.29in (AWG gauges 1 – 4) or section 16 – 35mm². Max wire clamp: 8mm/0.31in. After the Quick Release Battery Terminals installing battery, connects to the battery posts by pressing down the lever, so no tools needed. The Battery Post Terminals do easy to operation..
  • 【HIGH QUALITY】The Battery Terminal Ends are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss..
  • 【WIDE APPLICATION】These Automotive Battery Terminals can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries,RV etc. Just make sure that the Battery C....
Check Stock

Xiaoyztan 10 Pcs 12-Position Fork Type Terminal Jumper Block Wire Connector Barrier Strip 400V 12A (Black & Red)

  • PRACTICAL TERMINAL STRIPS - Our double row screw terminal strips can help you to connect bare wires to avoid clutter, while jumpers allow signals or power to be distributed neatly, making wiring connection simpler and more efficient. With Fixitok’s screw terminal blocks, you can quickly disconnect a wiring branch without removing the entire system..
  • SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide red and black jumpers to help customers distinguish positive and negative wire when installation..
  • HIGH QUALITY MATERIAL - The 4/5/6 positions terminal block strips are made from polycarbonate with flame retardance and nickel-plated copper with excellent electrical conductivity and anti-oxidation performance, to keep working stably and extend lifespan..
  • EASY INSTALLATION - Installation is a breeze. There are two screw holes at each sides of the terminal blocks, you just need to fix them with screws and connect cables. We provide 3 kinds of terminal blocks (4/5/6 positions), to meet your different needs of wiring on machinery, electric power, home appliance, computer or other automatic equipment. For 8/10/12 positions, please search for B08D3J19FT on Ama....
Check Stock

2PCS Battery Terminal Connectors 4 Way Quick Release Disconnect Battery Terminals Positive Negative Battery Cable Ends for SAE/JIS Type A Posts by ZONBANG Copper

  • 【4 WAY BATTERY TERMINAL】There are 4 posts for wire connection in the battery terminal connectors which are mainly used for SAE / JIS Type A car battery. The purpose of the design is for multiple cable connections..
  • 【EXCELLENT QUALITY】With superior corrosion resistance and electrical conductivity, the tinned copper quick release battery terminal also can reduce voltage distortion and transmission loss..
  • 【EASY TO IDENTIFY】With the signs of positive “+” and negative “-”, the quick disconnect battery terminal is easy to identify. And the battery terminal works great for replacing worn out and corroded terminals. Tip: Make sure to choose the correct terminal for the correct polarity..
  • 【PACKAGE INCLUDE】You will receive 2PCS battery terminal connectors(positive and negative), 2PCS anti-corrosion fiber washers and an allen wrench..
  • 【WIDE APPLICATION】The battery terminal connectors can be used for Trailer, Winch, Truck, Tractor, Jeep, RV, Cars, Vans, Caravan, Boat, etc..
Check Stock

2Pcs Battery Terminal Connectors, 4 Way Positive Negative Car Battery Terminals Clamp Connector Quick Release Disconnect for SAE/JIS Type A Posts, for Marine Car RV (yellow)

  • Dimension - For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in..
  • Easy to use -The battery post terminals connectors are easy to identify with positive (red) and negative(black) labeled. Comes with 1 hex key for easy installation. Wiring is easy to modify and connection is firm. Batteries can be connected to the battery posts by pressing down the lever, so no tools are needed..
  • 4 Way Battery Terminal -The SAE battery terminals connectors has 4 posts for wire connection. Designed for multiple cable connections, mainly used for SAE / JIS TYPE A rear car battery..
  • Sturdy & Durable - The quick disconnect battery terminal made of tinned copper not only have good conductivity and corrosion resistance, but also can reduce voltage distortion and transmission loss..
  • Wide Application - Our battery terminal connectors suitable for Cars, Vans, Motorhomes, Caravan, Truck, Marine Batteries,etc. Just make sure to connect the correct terminal for the correct polarity. Works great with good electrical conductivity and corrosion resistance..
Check Stock

Terminal Strips, FIXITOK 6 Sets 4/5/6 Positions Terminal Block Strips Waterproof 600V 15A Screw Terminal Strips with 400V 15A Pre-Insulated Terminal Barrier Strip Jumper

  • PRACTICAL TERMINAL STRIPS - Our double row screw terminal strips can help you to connect bare wires to avoid clutter, while jumpers allow signals or power to be distributed neatly, making wiring connection simpler and more efficient. With Fixitok’s screw terminal blocks, you can quickly disconnect a wiring branch without removing the entire system..
  • SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide red and black jumpers to help customers distinguish positive and negative wire when installation..
  • HIGH QUALITY MATERIAL - The 4/5/6 positions terminal block strips are made from polycarbonate with flame retardance and nickel-plated copper with excellent electrical conductivity and anti-oxidation performance, to keep working stably and extend lifespan..
  • EASY INSTALLATION - Installation is a breeze. There are two screw holes at each sides of the terminal blocks, you just need to fix them with screws and connect cables. We provide 3 kinds of terminal blocks (4/5/6 positions), to meet your different needs of wiring on machinery, electric power, home appliance, computer or other automatic equipment. For 8/10/12 positions, please search for B08D3J19FT on Ama....
Check Stock

Ampper Brass Battery Terminals Connectors Clamps, Top Post Battery Terminal Protector Set for Marine Car Boat RV Vehicles (1 Pair)

  • 1 Pair of military spec positive and negative standard top post connectors for increased strength and reduced corrosion..
  • Made of brass, + and - are directly marked on the terminal..
  • Used for battery extension, parallel connection, and ground connection..
  • Thread already on terminal, make it faster and easier for installation..
  • Used for Car, Vehicle, RV and Boat, which have a standard top post battery (19 mm tapering positive & 17 mm tapering negative)..
Check Stock

LotFancy Battery Terminal Connectors, 0/2/4/8/10 Gauge Positive Negative Battery Terminals for Car Audio, Marine, Truck, Boat, Motorcycle, with Spacer Shims, Covers, Wrench Tools, 1 Pair

  • 【Four Wire Outlet】Two 0/2/4 Gauge Inputs and two 8/10 Gauge Inputs. Designed for multiple cable connections. Wiring is easy to modify. Suitable for Most Battery models.
  • 【Positive Negative Terminal】Our positive Terminal is designed for a 17.5mm tapering post.
  • Negative Terminal is designed for a 15.9mm tapering post. Please confirm the tapered post size before purchasing. Our terminal connectors only work with standard top post tapered terminal, NOT include JIS Pensil Post.
  • 【Clamp Wires Tightly】The connectors are held in place with a screw and make a tight and secure connection. Easy to install and only requires two Alan wrenches.
  • 【Sturdy & Durable】 Zinc Alloy and Copper Material for Strong Electrical Conductivity, Super Corrosion Resistance, Reduce Current Transmission Loss. Also protects battery posts from corrosion for extended battery life.
  • 【Package Includes】2 x Battery Terminal Connectors, 2 x Adjustable Shims, 2 x Protective covers, 4 x Alan Wrenches. The provided Alan wrenches make for easy installation. The clear plastic covers clips on securely to protect the terminal.
Check Stock

TEMCo 4ga-750mcm HYDRAULIC LUG CRIMPER TOOL TH0034 - Electrical Battery Terminal Cable Wire

  • ❀【HIGH PRECISION JAW DESIGN】 Crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. This tool has....
  • ❀【ROTATE CRIMP DIES】The professional cable terminal crimping tool has 6mm²/10mm²16mm²/25mm²/35mm²/50mm² (Similar to AWG....
  • ❀【EASY OPERATION】 Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper....
  • ❀【ERGONOMIC DESIGN】The handle of the wire crimper is long for 10 inch and wrapped with soft rubber, ergonomic lever structure design can....
  • ❀【12PCS LUGS TUBULAR RING TERMINAL CONNECTORS】The crimper set contains 12PCS ring terminal connectors, save your time and money to buy other....
Check Stock

HYCLAT Red 50A 6-10 Gauge Battery Cable Quick Connect Disconnect Electrical Motors Plug Wire Harness Plug Connector Recovery Winch Trailer (4 Pack)

  • Premium Material: These battery quick connectors are made of PC Fire-retardant materials, durable enough for for over 10,000 connect/disconnect actions..
  • Allows for quick connect/disconnect of power from winches, trailers, portable solar power system or other electrical devices..
  • Safe and Effective: Come with 8 pcs silver plated copper terminal pins, has strong conductivity and provide a secure connection between the panels and the solar controller..
  • Easy Installation: Insert the wires into the terminal pins, then solder or crimp them.
  • Insert the terminal pin into the connector and lock them in place..
  • 8x Terminal Pins. If you have any questions about our products, please contact us, we will get back to you within 24 HOURS..
Check Stock

MILAPEAK Terminal Block and Strip - 6 Sets 4/5/6 Positions 600V 25A Dual Row Wire Screw Terminal Strip Block with Cover + 400V 25A Pre-Insulated Terminals Barrier Strips Jumpers (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered wire connection? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal strip block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row terminal strip blocks that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strip blocks are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making individual connections or by using the whole barrier bar or part of it up to multiple connections to a single line. Once the connections have been made, cl....
Check Stock