Top Connector Pins

SparkFun MicroMod ATP Carrier Board-Modular Interface Ecosystem-Connect microcontroller/Processor Board to Various Carrier Board peripherals

  • Access all the pins (i.e. ATP) of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board! This board breaks out the MicroMod Processor Board's pins on the M.2 connector to 0.1" spaced female headers and PTH pads on the edge of the board..
  • Features: M.2 Connector. Operating Voltage Range: ~3.3V to 6.0V (via VIN to AP7361C 3.3V Voltage Regulator). 3.3V (via 3V3).
  • Ports:1x USB type C, 1x USB type A Host, 2x Qwiic Enabled I2C, 1x CAN, 1x I2S, 2x SPI, 2x UARTs, 2x Dedicated Analog Pins, 2x Dedicated PWM Pins, 2x Dedicated Digital Pins, 12x General Purpose Input Output Pins, 1x SWD 2x5 header. Note: Depending on the design of the Processor Board, not all the pins may be accessible..
  • Additional Features: 1mAh battery backup for RTC. Buttons: Reset, Boot, LEDs. Power. 3.3V. Phillips #0 M2.5x3mm screw included.
  • Carrier board only. MicroMod processor board will be needed to use..
Check Stock

Wire Jumper Pin Connector, 620 Pcs Jumper Wire Cable Pin Header Connector Housing Kit Male/Female Crimp Pins Terminal with Storage Box

  • Dupont Connector Kit, This kit comes with the most common jumper wire pin housings in addition to male and female crimp pins.
  • Servo Connector Kit, These work great with all your typical breadboard style pin connectors and sockets.
  • Jst Connector Kit, Great selection of parts to make both male and female connectors is sizes from 1x1 to 2x6 pins.
  • Ribbon Cable Connector Kit, Come in a transparent box of classification management for convenient use and storage.
  • Jumper Wire Cable Pin Header Connector Housing Kit, There are total 620 pieces jumper wire connector parts which is good for home electronics prototyping.
Check Stock

Aviation Connectors 5A Lsgoodcare 30Pcs GX12-5 Pin Metal Aviation Plug Kit Including 12MM 5 Pin Plug Thread Male Female Panel Wire Socket and Aviation Plugs Cap GX12-5

  • [Aviation Connector Plug Male Female Kit]: High Quality GX12-5 Pin Metal Cable Connector, 12MM 5Din Straight Plug,Durable.
  • [Thread Aviation Plug Male 5 Pin 5A]: Metal and Hard Plastic (Shell Material: Zinc Alloy.
  • Connector Pins Material: Fine Copper Silver Plating).
  • [Aviation Wire Connector Female 5 Pin 5A]: Metal and Hard Plastic (Shell Material: Zinc Alloy.
  • [Multifunction Metal Chassis Connector Socket 300V ]: The aviation connector is used widely in signal and electronic connector of aviation, space....
  • [Come with Rubber Aviation Plug Caps + 30 Days Unconditional Refund, 90 Days Replacement Guarantee]: E-mail Us Directly If You Need Replace Or Have....
Check Stock

HYCLAT 2-4 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer, Pack of 2, Red

  • Allows for quick connect/disconnect of power from winches, trailers or other electrical devices..
  • 4x terminal pins. Diameter of the terminal pins: 1/4" / 6.55mm Connector: 3-1/8" x 2-1/8" x 1".
  • Easy to install. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either end is suitable for connection to the power or load side..
  • Instruction: With online installation instruction..
  • WHAT YOU GET - HYCLAT Battery Quick Connector - Ideal Gift for Father's Day, Chrismas Day, Perfect for DIY lover..
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

12 Pin OBD1 to 16 Pin OBD2 Convertor Adapter Cable for GM Diagnostic Scanner 15.7 inch

  • Compatible with GM cars made before 1996..
  • Connectors: GM 12Pins OBD1 male connector.
  • OBD2 16pins female connector. 15.7 inch Long ..
  • Used for connecting OBD II scanner and vehicle with this 12 pin connector which is specifically for GM..
Check Stock

MASTER TERMINAL KIT

  • CONNECTOR PIN REMOVAL: The 19 tools in this Master Terminal Tool Kit remove connector pins from a variety of terminals in most vehicles without damage to the wires or terminals.
  • FIND THE RIGHT TOOL: An application chart included inside the storage case details which tools are applicable for which vehicles.
  • COMFORT GRIP: The ergonomic comfort grip handles provide better handling for the fine detail movements of disconnecting pins.
  • Much easier to use than ring-style disconnectors.
  • MAKE IT EASY: Instead of wrestling with uncomfortable or improvised solutions, use the comfortable tools in this kit to disconnect pins easily.
  • STURDY CARRYING CASE: This set comes in a sturdy carrying case for easy storage, organization, protection, and portability.
Check Stock

Frienda 12 Pieces Red 6-10 Gauge Battery Quick Connector 50A 12-36V Battery Quick Disconnect Wire Harness Plug Kit for Motor Recovery Winch Trailer

  • Suitable for: the battery quick connector provides simple and convenient method for connect or disconnect power to a winch or other electrical device such as remote battery chargers, power inverter, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
  • What you receive: the package comes with 12 sets 6-10 gauge battery quick connectors, including 12 pieces connectors, 24 pieces terminal pins and 12 pieces caps, enough quantity to meet your different needs or replacement.
  • Durable to use: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, durable and reliable to use, not easy to break, have long service time.
  • Convenient installation: you can install these battery quick connector or disconnect plug quickly, just insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
  • Stable function: there are 24 terminal pins made of red copper coated with silver in the package, which possess strong electrical conductivity and can reduce the resistance to ensure stable voltage and current.
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

Gavemi Fan Splitter PWM Adapter Cable All are 4 Pin Compatible with 3 Pin Fan 1 to 4 Converter for PC Computer Case Fan, 12.5 inches 2 Pack

  • Fan splitter cable for running four 4 pin fans on the pwm fan header on a motherboard.
  • PC fan splitter all are 4 pins, Compatible with 4 pin pwm fan connector and 3 pin fan connector.
  • PWM fan splitter has a 4 pin male connector connected to the motherboard, Are four ''4 Pin'' female pins on the other end to connect to the pwm case fan.
  • Noticeļ¼šThis 4 pin fan splitter cable is not missing a pin and all are 4 pins.
  • Length 12.5 inches , Pack of two computer case fan splitter cables.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

2-GAUGE-8FT Hi-amp Universal-Quick-Connect-Wiring-KIT-Winch-Dump Trailer

  • Allows for quick connect/disconnect of power from winches, trailers or other electrical devices. If the product you recently received is a two-piece package, please contact us and we will replace it immediately..
  • 8x terminal pins. Diameter of the terminal pins: 1/4" / 6.55mm Connector: 3-1/8" x 2-1/8" x 1".
  • Easy to install. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either end is suitable for connection to the power or load side..
  • Instruction: With online installation instruction..
  • WHAT YOU GET - HYCLAT Battery Quick Connector - Ideal Gift for Father's Day, Chrismas Day, Perfect for DIY lover..
Check Stock