Top Construction Steel Pipe

BRAND NEW FLOWMASTER OUTLAW CAT-BACK EXHAUST SYSTEM,3

  • Brand New Flowmaster Outlaw Cat-Back Exhaust System, 3" Stainless Steel Pipes, Dual Out Rear, Compatible with 2015-2017 Mustang GT 5.0L Coupe (Holley Part #817734).
  • Flowmaster Outlaw Cat-back exhaust system is perfect for the person looking for a deep & very aggressive sound level inside & outside the car. This bolt-on emissions-legal system features our exclusive dual 3" Scavenger Series X-pipe for maximum power & a deep unique sound..
  • The stainless steel X-pipe flows into a pair of our race proven Outlaw Series mufflers & exits into dual mandrel-bent 3" stainless steel tailpipes which are finished off with large 4" polished stainless steel tips. The system is designed for an easy fit & includes all necessary parts & hardware for an easy install..
  • Features: Includes our Exclusive Scavenger Series X-pipe | Very Aggressive Interior & Exterior Sound | Uses the Factory Hanger Locations | Dyno Tuned For Maximum Power | Race-proven Outlaw Mufflers | Stainless Steel Construction.
Check Stock

nuwfrog Tubing and Pipe Cutter 1/4 to 2-5/8 Inch with Extra Blade for Pipe Copper Thin Stainless Steel Tube

  • 【Efficient and convenient】 The operation of cutting Thin Stainless Steel Tube, Metal,Brass - Copper Pipe Tubing from 1/4"-2-5/8" (6-64mm) O.D. becomes more easy, clean and efficient. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • 【Fine workmanship】High-quality alloy steel grinding blades, extremely sharp.The body is made of lightweight,durable aluminum alloy casting..
  • 【Versatile】This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops..
  • 【Ergonomic design】Knob provides a firm grip. Cutting tubes become a comfortable and quick task..
  • 【EXTRA BLADE】Our pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confidence..
Check Stock

WATER SOURCE WPF-3680 2" x 36" Well Point

  • Designed to be driven into all types of soil.
  • Jacket over gauze construction is permanently fixed to a perforated steel pipe.
  • Design allows the Passage of all the sand free water the pipe can carry, with stainless steel jacket and gauze.
Check Stock

SYMOTTEC 1/18'' to 3-1/2'' Exhaust Tail Pipe Expander Muffler Spreader Tool Set Compatible with Most Vehicles and Trucks

  • This Tail Pipe Expander set includes three different expander sizes, can work with all 1-1/8inch to 3-1/2inch ID thin-wall pipes and compatible with most vehicles and trucks..
  • Drop forged and heat treated steel construction for strength and hardness and through strict quality inspection. Suitable for family and professional mechanic. Plug and play, you can buy it with confidence..
  • Kit Includes 1 x small expander: 1-1/8" to 1-3/4", 1 x medium expander: 1-1/2" to 2-1/2", 1 x large Expander: 2-1/8" to 3-1/2, 6 x extra O-rings..
  • IMPORTANT NOTICE!!! (1) When expanding, the beveled steel cones of the expander must be fully inserted into the pipe, not half.
  • (2) Try to use a manual ratchet or manual wrench to turn the pipe support tool to expand the pipe, rather than electric Ratchet.
  • (3) Avoid twisting the expander with excessive force..
Check Stock

Universal Motorcycle Steel Baffle With Packing - Baffle Diameter 2.86\ - Length 8\ - For 3\ OD Pipe

  • 003cp003eUniversal steel muffler baffle with fiberglass packing. Perfect for drag pipes and custom mufflers. Includes mounting bolt.003c/p003e.
  • 003cli003eFiberglass-wrapped steel construction003c/li003e 003cli003eAvailable for a variety of pipe sizes003c/li003e 003cli003eMay require drilling a hole in the exhaust pipe003c/li003e.
  • 003cp003eSize corresponds to muffler pipe outer diameter.003c/p003e 003cp003eFor 3" OD pipes (Baffle Diameter 2.86" - Length 8")003c/p003e.
Check Stock

V-Twin 30-0372 - V-Slot Type Steel 2-1/4\ Pipe Baffle Set

  • 003cp003eUniversal steel muffler baffle with fiberglass packing. Perfect for drag pipes and custom mufflers. Includes mounting bolt.003c/p003e.
  • 003cli003eFiberglass-wrapped steel construction003c/li003e 003cli003eAvailable for a variety of pipe sizes003c/li003e 003cli003eMay require drilling a hole in the exhaust pipe003c/li003e.
  • 003cp003eSize corresponds to muffler pipe outer diameter.003c/p003e 003cp003eFor 2.25" OD pipes (Baffle Diameter 2 1/8" - Length 8")003c/p003e.
Check Stock

Libraton Copper Tube Cutter 1/4" to 2-3/4", Tube Cutter, Heavy-duty Tubing Cutter for Copper Pipe with Deburring Tool

  • [High-quality Blade] Libraton pipe cutter blade is made from aluminum alloy, wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation smoother and clean..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2-3/4" (70mm)(OUTER DIAMETER)..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, and THIN stainless steel tubes).
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
Check Stock

Powerbuilt Small Tailpipe Expander 1-1/8 Inch to 1-3/4 Inch - 940377

  • Made to be the most reliable tools in the market today.
  • Heavy-duty steel construction allows for strength and durability.
  • Straightens out dents, bends in tailpipes and mufflers without damaging pipe or muffler.
  • Flare and expand the exhaust pipe so you can slide another pipe in.
Check Stock

Big Gun Exhaust 07-1122 Eco System Slip-On Exhaust System (Color: Brushed, Material: Aluminum)

  • Economically priced high quality slip-on exhaust system.
  • USFS forestry approved screen type removable spark arrestor Included Tig welded stainless steel pipe construction 6061 Br+AM15u.
Check Stock

Libraton Tube Cutter, Mini Tubing Cutter, Heavy-duty Pipe Cutter with Deburring Tool for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube..
  • [Mini Cutter] The mini tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • [Copper Tube Cutter] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
Check Stock

Universal Motorcycle Steel Baffle With Packing - Baffle Diameter 1.85\ - Length 10 - For 2.0\ Outer Dimension Pipe

  • 003cp003eUniversal steel muffler baffle with fiberglass packing. Perfect for drag pipes and custom mufflers. Includes mounting bolt.003c/p003e.
  • 003cli003eFiberglass-wrapped steel construction003c/li003e 003cli003eAvailable for a variety of pipe sizes003c/li003e 003cli003eMay require drilling a hole in the exhaust pipe003c/li003e.
  • 003cp003eSize corresponds to muffler pipe outer diameter.003c/p003e 003cp003eFor 2.0" OD pipes (Baffle Diameter 1.85" - Length 10")003c/p003e.
Check Stock

SCITOO 3-Pieces Pipe Expander Tool Set 1/18'' to 3-1/2'', Tail Pipe Expander Compatible with Most Vehicles and Trucks

  • ...ork to all 1-1/8inch to 3-1/2inch ID thin-wall pipes. A simple wrench turn expands pipe for system repair and installation..
  • 【SUPERIOR MATERIAL】 1pc small expander: 1-1/8" to 1-3/4", 1pc medium expander: 1-1/2" to 2-1/2", 1pc large Expander: 2-1/8" to 3-1/2, 6pcs extra O-rings. Drop forged and heat treated steel construction for strength and durability and through strict quality inspection. Suitable for family and professional mechanic. Plug and play, you can buy it with confidence..
  • 【ATTENTION】 Before purchasing this item, please double check the product details information. If you have any questions, feel free to contact us for help..
Check Stock