Top Container Fittings

75mm IBC Tote Tank Adapter Ball Valve, IBC tote valve, 2.95' Coarse Thread Tote IBC Ball Valve Connector Replacement for IBC Tote Water Liquid Container

  • 【WIDE USAGE】— 75mm IBC Tote Adapter is suitable for plastic container outlet control to prevent liquid from splashing around. Widely used in chemical process and acid, liquid storage buckets, tanks, container outlet control valves..
  • 【IBC TOTE ADAPTER】— This IBC tote tank adapter ball valve is made of high-density polyethylene and plastics, which is acid resistance, alkali resistance, corrosion resistance, high mechanical strength, and durable to use..
  • 【NO LEAK】— IBC tote fittings with inner diameter input end diameter 75mm, pitch: 0.19″ (5mm).
  • 60mm/2.36″ diameter for suitcase drain cover, liquid storage buckets, and tanks outlet control valves to prevent liquid leakage..
  • 【EASY TO INSTALL】— 2.95″ coarse thread tote ball valve is easy to install, just need to connect to the water tank to use, equipped with silicone gasket and raw material tape to enhance sealing..
  • 【PACKAGE INCLUDED】 — Purchase IBC tank drain adapter from Catilon, you can get 2.95’’ IBC adapter ball valve, IBC A200-S60*6(mm) + IBC tote valve cover + spout cap + silicone gasket (NOTE: Please carefully check the size of the IBC Tote Ball Valve before purchasing). Please confirm the thread diameter of your IBC tank adapter is 60mm..
Check Stock

Intex 28005E ZX300 Deluxe Automatic Pool Cleaner, Grey

  • KEEPS YOUR POOL CLEAN: Powerful 700 gal/hour water powered suction.
  • ALL-WHEEL DRIVE: Water powered all-wheel drive for swift cleaning action and superior wall-climbing performance.
  • REQUIRED PUMP: Intex pump with a flow rate between 1,600-3,500 gal/hour required.
  • DUAL SCRUBBERS: Rotating dual dirt scrubbers for cleaning even the finest and hard to remove dirt up to the water line.
  • DEBRIS FILTERING: Fine 6ga (0.15mm) mesh filter for capturing even the finest debris. 0.48gal large capacity debris container. 21ft 4in non-tangle hose.
  • PRESSURE SIDE OPERATION: Hooks up to the inlet for water coming back into the pool and uses the water pressure (not suction) to operate.
  • For use with Intex above ground pools with PVC liners and 1.5in threaded inlet fittings ONLY.
  • Not suitable for Intex Easy Set Pools or pools with inflatable top ring.
Check Stock

Water Pressure Diaphragm Pump Industrial 115V, Self Priming Pump 4 Gpm 45 Psi include Power Plug, Fittings Strainer Filter for Kitchen Bathroom RV Marine Yacht Caravan, Garden Hose

  • ...rinkler faucet and agricultural irrigation as you like.
  • 【Why You choose Us】High quality home and industrial facility should be available to everyone. You'll get 1 x AC Diaphragm Water Pump, 1 x 1/2 inch Twist-on Water Strainer (includes 50 mesh stainless steel screen), 2 x Hose Fittings, 1 x User Manual, 1 x Box Container.
Check Stock

Swpeet 246Pcs SAE & Metric Grease Nipple Assortment Kit, Hydraulic Grease Fittings Standard with Plastic Grease Fitting Cap – 1/4\

  • ...Fittings Kit Meet NPTF requirement of US, better than NPT thread, could be used as NPT thread, too. Allows you to simply insert lubricant directly into the bearing without having to disassemble or replace the bearing.
  • For restoration and replacing missing or broken grease zerks on your machinery..
  • ❤ 5, With A Container Box --------- All of the items come in a Sturdy Plastic Box to keep them safely together. The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating. Suitable for most automotive, motorcycle, truck, farm, and industrial applications..
Check Stock

Bimini Top 3-Bow/4-Bow Stainless Steel Boat Jaw Slide Cap Eye End Deck Hinge Fittings Hardware 16 Set 1 Inch

  • 4 BOW and 1'', Round Tube Bimini Top Kit with Stainless Steel Fittings.
  • 8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings.
  • Package : 16 Pieces in 1 Set, (WHAT YOU GET:8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings).
Check Stock

ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings

  • SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
  • This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
  • 4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
  • Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
  • FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
  • BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
  • 2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
  • EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
  • Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.
Check Stock

MX Bimini Top Fitting Hardware Set Fit 7/8',Boat Jaw Slide,Cap Eye End,Deck Hinge(6pcs)

  • Bimini Top Fittings Hardware Set Black Nylon 6 PCS.
  • 7/8 inch tube bimini top fittings hardwares set.
  • Bimini fittings set included: 2 pcs nylon eye end cap fittings, 2 pcs nylon jaw slide fittings, 2 pcs nylon deck hinge fittings with screws..
  • Bimini top hardware made of durable black nylon.
  • The bimini top fitting kit easy to install,very convenient.
Check Stock

Pneumatic Pressure Calibrator by Ace Instruments for Testing & Calibration of Pressure & Vacuum Gauges Model: DPI-2200

  • Model: AI-DP1-2200 | Measuring Parameters: Pressure and Vacuum | Vacuum Range: Ambient to -0.9 Kg/Cm² | Pressure Range: Ambient to 30 Kg/Cm² (30 Bar)..
  • Material Of Construction: Alluminium and Stainless Steel | Weight Approx. 1.5 Kgs..
  • Instructions for use: DO NOT operate this to generate pressure above 30 BAR. Use this unit only for Testing work Use this unit in environments specified in the manual The life of spares such as O-rings can be shortened by exposure to atmospheric conditions. For storage use an airtight container |.
  • Never remove the SS fittings fitted in the pump. These are fitted and tested for leakage. Use of Teflon tape on these parts after removal and refixing will damage the threads in the pump and our guarantee will become null and void.
  • Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4.
Check Stock

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

  • 【 3/4" INCH ELBOW TEE COMBO PACK 】Our industrial pipe fittings 3/4 malleable iron threaded elbow/tee combo/pipe flange pack provides you the great floor flange pipe fittings at a reasonable price. Malleable cast iron pipe fittings can decorate your home or store more elegant and functional..
  • 【 PIPE INDUSTRIAL DECOR 】You can use these black malleable pipe fittings to install durable iron frame for your pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, wall lamp or other industrial home decors. When you prefer an industrial, steampunk, vintage, retro, factory look, our decorative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
  • 【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
  • 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of bl....
Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

  • Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
  • Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
  • Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
  • Contains (5) 3/16″ OD Compression Brake Line Fittings.
  • Contains (5) 1/4″ OD Compression Brake Line Fittings.
Check Stock

SHOWNEW 50PCS Garden Hose Washers Rubber Washers Seals Hose Gaskets Heavy Duty Water Hose Washers O Rings Leakproof Fittings for Standard 3/4 Inch Garden Shower Hose and Water Faucet

  • ✅These hose washers are made from heavy duty rubber construction for long lasting durability.
  • ✅Designed to fit all standard 3/4" garden hose fittings, help to provide a tight seal to prevent leakage.
  • ✅Soft, flexible and pliable garden hose gaskets, easy to install.
  • ✅Widely used water hose washers, perfect for use in garden hoses, water faucet, washing machine, shower head and more.
  • ✅Value pack, 50pcs rubber hose washers comes with plastic container box, necessary for daily use.
Check Stock

40 Pieces Straight Push Connectors 6/8 /10/12 mm Quick Release Pneumatic Connectors Air Line Fittings for 1/4 5/16 3/8 1/2 Tube 2 Way

  • Material - Made of quality PU & Plastic. High pressure resistance, can withstand strong pressure without tripping out. Great for long term use. Push to connect fittings type: 1/4'', 5/16'', 3/8'',1/2'， fit for 6mm 8mm 10mm 12mm OD tube.
  • Easy to use: Simple push in design for connecting to the tube and provide secure connection, requires no extra sealing..
  • Convenience: Quick Connect Fittings easy to install, flexible and space-saving, 360-degree rotate, Release rings adopt ellipse design, which can be removed conveniently. No extra sealing needed, just need a simple push, provide secure connection..
  • Application: It is widely applied in industries automatic production equipment like machinery, electronics, automobile, packaging.
  • Quantity: package includes 40 pieces fittings, 10pcs for 1/4" fittings, 10pcs for 5/16" fittings, 10pcs for 3/8" fittings, 10pcs for 1/2" fittings, meet your requirement for various purposes.
Check Stock