Top Converter Pcb

AEDIKO 2pcs MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor IIC/SPI 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module

  • Power Supply: 3-5V (Internal Low Dropout Regulator).
  • Communication: Standard IIC Communication Protocol.
  • Built-In 16Bit AD Converter, 16-Bit Data Output.
  • 9-Axis Motion Tracking: 3-Axis Gyroscope, 3-Axis Accelerometer, 3-Axis Magnetometer and a Digital Motion Processor (DMP).
  • MPU9250 Module Includes Pull-Up Resistors On the SDA, SCL, and NCS Lines.
  • Pull-Down Resistors On the FSYNC and AD0 Lines.
  • MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor Using Immersion Gold PCB, Machine Welding Process to Ensure Quality.
Check Stock

Eightwood Aluminum Electronic Enclosure, HiFi Audio Amplifier Ham Radio Project Box, PCB Board Case Black - 4.33 x 2.99 x 1.81 inch (LWH)

  • Well Made: Heavy duty extruded aluminum construction, professional sandblast/matte anodized finish.
  • Built-in slots/grooves are for holding PCB or circuit boards.
  • The sliding cover design allows the top part of the extrusion slides smoothly, easy to access inside to mount parts or components.
  • Color:Black | External dimension:4.33 x2.99 x1.81 inch /110x76x46mm (LHW) | interior dimension:4.33 x2.52 x1.69 inch/110x64x43mm (LWH).
  • Application: Electronic projects like switch/converter, power supply units, audio amplifier projects, ham radio projects,etc.
Check Stock

Chenyang CY Memory Card Adapter CF Compact Flash Memory Card to 50pin 1.8 Inch IDE Hard Drive SSD Converter Adapter for Toshiba

  • You have to format with FAT32 when you install OS on the CF memory,Use CF card as DOM: power supply from external floppy drive power socket..
  • You can save money by using CF memory card when you test on computer. Computer is rebooted suddenly because of electrical signal at electric factory..
  • In this case, CF memory card has the low extent of the damage..
  • CF Compact Flash Merory Card to 50pin 1.8 Inch IDE Hard Drive SSD Converter Adapter It is stable and doesn't have any noise and vibration.
  • Master/slave etting jumper ； PCB color: Black or Green.
Check Stock

Car Heater 12V Portable Heater for Car,car Heater That Plugs into Cigarette Lighter Windshield Fast Heating Defrost Defogge 2 in 1 Adjustable Heating Fan/Cooling Fan,1 Pack

  • USB car cigarette lighter socket adapter: USB Input: 5V 2A, Cigarette Lighter Socket Output: 12V 8W Max.
  • USB Port Power Converter: convert power from USB port to 12V car cigarette lighter socket.
  • Convenience: Easy to power on your car electronic equipments by extra power.
  • Plug and play: Easy to carry when travel. The part of PCB board is moulded by PVC which can extend its life.
  • Fit for Driving recorder, electronic dog, car charger and other automotive electronic equipment.
Check Stock

MELIFE 4pcs GY-521 MPU-6050 MPU6050 3 Axis 6 DOF Accelerometer Gyroscope 16 Bit AD Converter Data Output IIC I2C Sensor Module for Arduino

  • MPU-6050 MPU6050 6-axis Accelerometer Gyroscope Sensor£¬Integrates 3-axis gyroscope and 3-axis accelerator, including the hardware accelerator....
  • Chip built-in 16bit AD converter, 16-bit data output ,Supports the I2C serial interface and has a separate VLOGIC reference pin..
  • User-programmable gyroscope, with a full-scale range of ¡À250, ¡À500, ¡À1000, and ¡À2000¡ã/sec (dps) and a user-programmable..
  • Acceleration Range: ¡À2 ¡À4 ¡À8 ¡À16g.
  • Power Supply: 3-5v (internal low dropout regulator). PCB size: 1.65 x 2.0 cm Note: Operation using....
Check Stock

2 Pieces MPU-9250 GY-9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor I2C SPI 3-Axis Gyroscope Accelerometer Magnetometer Sensor Module

  • Basic information: module model: GY-9250.
  • Power supply: 3-5V (internal low dropout voltage regulator).
  • Communication: standard IIC communication protocol.
  • Internal structure: this module uses the MPU-9250, and combines a 3-axis gyroscope, a 3-axis accelerometer and a 3-axis magnetometer which are integrated into a single QFN package.
  • Reliable chip: the MPU-9250 integrates a 3-axis magnetometer AK8963, which features smaller size compared to previous generation and sensitivity improvement with 0.15 μT/ LSB.
  • The 16-bit AD converter is embedded in the chip, with 16-bit data output.
  • Quality process: the 9-axis sensor module features the immersion gold PCB, which uses the machine welding process to make it work fine.
  • Applications: DTV and set-top boxes are applied to internet connection.
  • Wearable sensors are applied to fitness equipment and sports.
Check Stock

ANMBEST 10PCS USB 3.1 Type C Connector 24 Pins Male Female Plug Socket Receptacle Adapter to Solder Wire & Cable 24P PCB Board Support Module

  • [FASTER DATA TRANSFER] Data transfer speed is up to 5Gbps, and Sync movies, music, and more in seconds. It supports up t[FASTER DATA TRANSFER] Data transfer speed is up to 5Gbps, and Sync movies, music, and more in seconds. It supports up to 3 Amps of power output for charging your devices.o 3 Amps of power output for charging your devices..
  • [DURABLE METAL BODY] The converter connector is gathered with aluminium alloy metallic minimalist, ensuring longer life span even plug in and unplug it hundreds of times..
  • Attached with PCB board, convenient for welding and wiring..
  • [APPLICATIONS] Type C interface is widely used in mobile phones, tablets, laptops, and extended data cables, charging heads, mobile power supplies and other digital accessories..
  • Package includes 5 piece male plug & 5 piece female socket..
Check Stock

USB to 12V Car Cigarette Lighter Socket Female Step Up USB to 12V Cable Converter for Car Cigarette Lighters Driving Recorder Car DVR

  • NOTE: Cigarette Lighter Socket Output: 8W, 12V, 0.8A Max. Please check the power of your device to make sure it is less than 8W. This cable should be used at least 5V 2A or higher current..
  • Fit for many 12V 8W devices, such as: Driving Recorder, GPS, Radar Detector, Heated Seat, Led Lining Strip, Led Light, Fan. Not Support tire inflator, car fridge, car cleaner or other devices with more than 8W of power..
  • USB Port Power Converter, convert power from USB port to 12V car cigarette lighter socket. Easy to power on your car electronic equipment by extra power (such as a power bank)..
  • Length: 1.0m / 3.28 ft. The part of PCB board is moulded by PVC which is hard to damage..
  • Synchronous Rectification: The conversion rate is 95% or more, lower heat and long working time..
Check Stock

Massive Audio P8 Primo Series. 3,500w RMS / 7000w MAX, 0.5 Ohm Stable, Class D, Monoblock Mega Car Amplifier with Bass Boost & Clip LED

  • HIGH POWER CAR AUDIO AMPLIFIER: These high quality amplifiers are extremely powerful! This 12 volt car audio amplifier features: 1400 x 1 RMS @ 2 Ohm / 7000w x 1 Peak Power, Freq. Response 10Hz - 220Hz, Built-In OEM Line Converter, Bass Boost 0dB~12dB. Our monoblock amplifiers for cars, boats and off road vehicles provide rich clean power for your subwoofers!.
  • PRODUCES POWERFUL, CLEAN, FULL SOUND: Our amplifiers are very efficient and powerful and provide you with a real value that you can hear for yourself. Our mono car subwoofer amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal. This Primo P8 incorporates a clip liit switch that allows up to 16.5 Volts plus a Parametic EQ with 0 - 12 dB Bass Boost for even more customization..
  • QUALITY TESTED AND GUARANTEED TO GO BEYOND RATED POWER: Hits its full power or more all the time! That is our guarantee! You don't need to set the gain to low to avoid distortion. Also, by sensing the DC offset of a factory radio it can activate the Built-In (ATO) Auto Sensing Turn On Function (Hi-Low Converter).
  • GREAT QUALITY PRODUCT THAT WILL LAST LONGER: Don't settle for underpowered and underwhelming car stereo monoblock amplifiers! With our extra features like 12V Rem....
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

for PS2 Sata Adapter, Upgrade Board for PS2 IDE Original Network Adapter for Game, A LargeCapacity for Sata Hard Disk Adapter

  • 【Specially Design】 Precise cut, perfect fitness, suitable for PS2 IDE original network adapter, connect a SATA hard drive to your console, and use the loader to play games from the hard drive.
  • 【Save Game Loading Time】Use this SATA network hard disk adapter for PS2 IDE original network adapter, A large capacity for sata hard disk is used to replace the IDE hard disk to play the game, which will save us a lot of game loading time..
  • 【Easy to Install】Equipped with mounting screw pack, which makes it easy to install and detach.Efficiently simplify your work!.
  • 【Good Performance】The Sata HDD hard disk converter adapter for PS2 console made of high quality PCB board material, with fast operation speed and excellent performance..
  • 【Portable SATA Network Adaptor】Upgrade sata adapter for PS2 is small and lightweight, convenient for us to storage and a good replcement accessory..
Check Stock

DTECH FTDI USB to TTL Serial 5V Adapter Cable 6 Pin 0.1 inch Pitch Female Socket Header UART IC FT232RL Chip Windows 10 8 7 Linux MAC OS 6ft Black

  • 6 ft FT232 USB to TTL serial adapter (with 6 pin 0.1” pitch female socket header) connects devices with 5V logic level UART signals interface to a....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable (6 way outputs, Single-In-Line ) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND.
  • FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 6 pin header 5V TTL to USB converter cord is compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater.
Check Stock