Top Coolant System Stop Leak
DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters
- ...nd watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
- Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
- Wide Application: Coolant system leak checker tool set is equipped with 3 specific aluminum adapters and 10 nylon adapters , solid and durable, widely compatible for Mercedes (W123, W126, W124, W201), GM(Buick), Jeep Peugeot, Subaru, Chrysler, Acura, GM(Nova, Spectrum, Sprint), Mitsubishi, Nissan, Mazda....
Check StockFEXON Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36 Clutch Removal Tool Kit Replaces 70074 Fan Clutch Wrench Set 32mm
- ...nd watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
- Specification: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
- Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
Check StockJIFETOR Radiator Pressure Leakage Tester Tool Kit, 14PCS Automotive Cooling System Water Tank Leak Test Detector Set with Aluminum Hand Pump and Adapters
- ...nd watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
- WIDE USAGE: Coolant system leak checker tool set is equipped with 12 specific aluminum adapters, solid and durable, widely compatible with Cadillac, Benz, Buick, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishl, Nissan, Mazda, Toyota, Infiniti, Volvo, Saab and so on. All these adapters are color coded, number marked and placed exclusively, can be easily selected according to the marked number in instruction, convenient and no confusion. Check if the adapter caps are suitable when get the kit.
- HAND PUMP LEAK DETECTOR: Radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and....
Check StockRobinair 75700 CoolTech Coolant Exchanger
- 10 minute exchange process means no more waiting for the engine to warm up.
- Engine off feature removes pulleys belts and fan blades from the safety equation.
- Vacuum mode creates a push/pull exchange process allowing the technician to safely remove high pressure in a hot system.
- Leak check feature allows the technician to test for leaks prior to refilling.
- Two external new coolant supply tanks allow on-board storage of two different coolant types.
Check StockSuper Stars 35Pcs Radiator Pressure Tester, Pneumatic Vacuum Coolant Refill Tool Automotive Kit, Test Cooling Systems for Leaks
- Best tool to test any leaks in radiator, change coolant, quick refill the vehicle cooling system and remove air pockets. This 35pcs Coolant system leak checker and filling tool set is your must have kit..
- The radiator pressure tester pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. Large pump capacity reduces strokes required to pressurize cooling systems, also prevents air pockets that can lead to hot spots in the cooling system..
- Drastically reduces the time it takes to fill cooling system. Features include a thumb-operated relief valve for quick and easy pressure release and self-locking quick-disconnecting components..
- 35 Pieces: include durable exact size of nylon testing caps, rust-proof copper connectors, clear gauge reading, high-quality rubber and metal adapters all included in one red molded case, easy to organize, use and carry. American & European styles air plugs are included for you to choose. Suitable for most domestic and import vehicles..
- AVOID OVER PRESSURIZE THE RADIATOR. Ideal readings should range between 15-20PSI (1.03-1.37BAR). a) Gauge holds steady – If gauge hand holds at the same pressure number for 2 minutes, there are no serious leaks in the system. b) Gauge drops slowly – Indi....
Check StockJet Tools CS-315, 315mm 1-Phase Ferrous Manual Cold Saw (414229), Standard
- DURABILITY: Blade drive reduction gearbox operates in an oil bath..
- FLOOD COOLANT SYSTEM: 1-1/3 gallon coolant reservoir and pump with flow control system extends blade life..
- REPEAT CUTS: Fully-adjustable material depth stop for sawing repeatability and increased production..
- MAXIMUM TORQUE: Hardened and ground direct-drive worm shaft, and bronze worm wheel, transmits maximum torque to the saw blade..
- BURR-FREE CUTTING: Quick-clamping cam-action vise with adjustable gib and material support bar..
Check StockLiqui Moly 20132 Radiator Stop Leak, 0.25 l, 1 Pack
- LIQUI MOLY Radiator Stop-Leak completely seals such leaks immediately with ease. .
- Secures the combustion chamber from damages caused by coolant admission.
- For all cooling water and heating systems with and without water filters.
Check StockLiqui Moly 8956 Radiator Stop-Leak - 150 ml
- LIQUI MOLY Radiator Stop-Leak completely seals such leaks immediately with ease. .
- Secures the combustion chamber from damages caused by coolant admission.
- For all cooling water and heating systems with and without water filters.
Check StockExpress Water Leak Stop Valve for Reverse Osmosis and Under Sink Water Filtration System – Automatic Water Shut-Off Valve for Water Filtration Systems – Shut Off Water Supply When Water Leaks
- Leak Stop Valve: Enjoy peace of mind with your under sink reverse osmosis water filtration system with the help from Express Water’s leak stop....
- Multi-Use Leak Detection Valve: The leak stop valve is compatible with any system and application. Use this water valve on Reverse Osmosis Systems,....
- Easy to Install Shut Off Valve: Express Water’s leak stop valves designed to universal standard size and are easy to install with your water....
- Make The Reliable Choice: Express Water water leak valves are made to last. Choose the system that lasts longer to give you the best value.Save Time....
- On Demand Support: Support from experts who can answer any of your questions about your water shut off valve..
Check StockABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit
- PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
- Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
- FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
- The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
- Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
- BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
- While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
- Constructed from opaque yellow hard-plastic components.
- 3 out of 5 cap adaptors include steel rings to hold the ada....
Check StockMaster Cooling System Test and Purge Auto Kit by Steelman, 27-Piece Kit, Leak and Pressure Test, Vacuum Purge Kit, Storage Case Included
- 27-PIECE KIT – Kit contains 27 pieces including 22 different test caps, a vacuum pump, pressure pump, cone adapter, and air bleeding / coolant hoses.
- LEAK AND PRESSURE TESTS – Perform leak and pressure tests on cooling systems, radiators and heater cores, head gaskets, headers, and water pumps.
- TEST RANGE – Test for cooling system leaks at up to 35 PSI.
- VACUUM REFILL – Includes vacuum purge kit to refill coolant systems and prevent air lock / contamination.
- COLOR CODED CAPS – Test adapter caps are color coded for easy identification.
- FOREIGN AND DOMESTIC – Fits a wide range of foreign and domestic models including Ford, GM, Honda, Mazda, Audi, Nissan, Toyota, Chevy, and more.
- STORAGE CASE – Kit comes with a convenient blow-molded red plastic case for easy organization and storage.
Check StockGates Engine Coolant Thermostat compatible with Ford F-150 4.2L 4.6L 5.4L 6.2L V6 V8 1997-2014 Cooling Housing Belts
- This Gates Engine Coolant Thermostat Housing Gasket is compatible with Jeep Wrangler 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, 1988,.
- ENSURE A LEAK-FREE FIT: Cooling system gaskets tend to be pesky leakers. That is why cooling system replacement gaskets should be quality, premium gaskets like the Engine Coolant Thermostat Housing Gasket.
- PREVENT OVER-TORQUING: Cooling system gaskets, like the Engine Coolant Thermostat Housing Gasket, feature application-specific materials to prevent over-torquing and ensure a precise, trouble-free seal.
- RELY ON QUALITY BELTS AND HOSES: In the most extreme environments and those more familiar, Gates is there with the right product, in the right place, at the right time. Whether building original equipment or maintaining products in the aftermarket, they enable their customers to be more efficient, productive, and profitable. Gates proudly brings quality, reliability, and performance to their OE-equivalent aftermarket parts.
- TRUST IN GATES: This leading supplier of belts, hoses, timing belt kits, belt tensioners, serpentine belts, and more has worked at the forefront of automotive innovation for over a century. The Gates automotive team designs, develops, an....
Check Stock