Top Coolant Through Bar

Kauplus Radiator Coolant Filling Funnel Kit- Spill Proof Coolant Filling Plastic Funnel Kit with Adapter

  • Best Choice for Filling Automotive Cooling Systems. Fit on Most Domestic and Import Cars and Light Trucks, i.e. G.M, Nissan vehicles….
  • Smart Coolant Filling Funnel for drain refill of the coolant prevent Spills & Trapped Air as coolant filling application, the spill-free funnel eliminates trapped air pockets which usually cause erratic cooling system and heater performance.
  • No-Spill Filling Funnel Kit with 5 Caps (adapters) fits on most domestic and import carts, 2 pcs of 45 degree elbow allows use on radiator caps that are placed at an angle and 1 straight extension (5 inch) allow access to caps under shrouds.
  • The Spill Proof Coolant Filling Funnel Incorporates a Fluid Stopper with tube for trapped air.
  • Tight attach the plastic tube on fluid stopper end to bleeding trapped air pockets out while filling the coolant to prevent unsteady pressure with cooling system. These air pockets accumulate over time can cause overheating by impeding the flow of coolant through the system.
Check Stock

ABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit

  • PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
  • Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
  • FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
  • The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
  • Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
  • BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
  • While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
  • Constructed from opaque yellow hard-plastic components.
  • 3 out of 5 cap adaptors include steel rings to hold the ada....
Check Stock

Replacement Coolant Reservoir Tank - Compatible with Freightliner Vehicles - Cascadia, Century Class, Columbia, Coronado, FLD020SD, M2 106, M2 112 - Replaces 525263005, A05-25263-006, A0533118000

  • Replacement Coolant Reservoir Tank - The coolant tank contains coolant fluid that is discharged from the cooling system attached to the engine. Pressure builds up and released when the coolant is hot and expanding through the radiator and when the engine cools down, the excess fluid flows back into the radiator from the coolant tank of your freightliner vehicle..
  • Compatible Replacement for Freightliner Vehicles - 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Freightliner Cascadia | 08, 09, 10, 11 Century Class | 10, 11, 13, 14, 15 Columbia | 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 Coronado | 2011 FLD120SD | 2014, 2016 M2 106 | 2008-2019 M2 112 |. If you are experiencing leaks, low level of coolant and overheating engine then you may have a problem with your coolant reservoir tank..
  • Replaces Part# A05-25263-006, 525263005, A0525263005, A0525263007, A0533118000, 603-5203 commonly found on popular Cascadia, Century Class, Columbia and Coronado vehicles including models 08, 09, 10, 11, 12, 13, 14, 15, 16 17, 18, 19. The coolant reservoir tank can easily be located on the engine bay mounted on the engine near and connected to the radiator..
Check Stock

CMTOOL Radiator Pressure Tester Kit with Universal Rubber Adapter, Updated Coolant Pressure Tester Kit Coolant Vacuum Refill Kit, Automotive Cooling System Pressure Tester Kit with Carrying Case

  • 【Upgraded Multifunctional Cooling System Pressure Tester Kit】The radiator pressure tester kit includes everything you need to quickly and easily test vehicle radiator system leaks and refill coolant, improve vehicle service life, and keep your vehicle running smoothly. Thanks to its universal rubber adapter, the coolant pressure tester master kit is compatible with almost all domestic and imported vehicles on the market. So whether you are a DIY-er or a professional, this set has you covered..
  • 【Durable Radiator Pressure Tester with Good Airtightness】The radiator pressure tester uses high-quality aluminum pump cylinders instead of ordinary plastic pump cylinders, 21" rubber nylon resin hoses and brass fittings to ensure durability and good airtightness. The coolant leak detection kit can quickly find Whether there is abnormal leakage (About 10 minutes). The accurate shockproof meter (3 inches), the dial uses color code design to make the data clear and easy to read. (0-35psi/0-2.5bar).
  • 【Car Coolant Vacuum Refill Kit with 47.24-inch Transparent Hose】The transparent coolant filling hose is convenient for observing the supply status of the coolant, and the joint is equipped with a brass filter to avoid the inhalation of metal or other impuritie....
Check Stock

YSTOOL Radiator Pressure Tester Pneumatic Vacuum Type Purge Refill Kit Universal Automotive Cooling System Water Tank Leak Test and Coolant Fill Tool 28PCS Set with Adapters Gauge Black Case

  • Radiator pressure tester & coolant vacuum refill kit mainly includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1PC universal cone rubber adapter, fit nearly any type of radiator openings on vehicles at home and abroad, helping detect and determine whether the water tank is leaking and fill the coolant under vacuum. There are also 3PCS radiator cap adapters and 2PCS connectors checking the radiator caps for leaks..
  • Radiator pressure tester is composed of 3" pressure gauge(0-35 psi.
  • 0-2.5 bar), aluminum cylinder pump and 21" long rubber hose. Manual radiator leak tester features fast pressure relief function and quick disconnect for convenience. Use the hand gauge tester pump tool to pressurize the radiator / cap and observe whether the pointer drops over time to confirm a system leak..
  • Vacuum coolant filler uses shop air to draw a vacuum, by using the connected coolant filling hose to extract new coolant and transfer it into the cooling system with no air pockets produced. Adding coolant in vacuum condition will not appear large cavitation, avoid engine warping and other damage. Coolant vacuum refill tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass....
Check Stock

JIFETOR Radiator Coolant Pressure Tester Vacuum Refill Tool Kit, 28PCS Automotive Cooling System Leak Test and Pneumatic Purge Fill Set with Testing Adapter Caps Universal for Airlift Car Auto Truck

  • MULTIFUNCTION: JIFETOR all in one comprehensive coolant pressure tester fill kit includes leak detection, temperature measurement and coolant filling functions. Radiator pressure tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Coolant vacuum refill tool uses vacuum pump to extract air and form a vacuum to draw coolant into the cooling system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
  • WIDE USAGE: Cooling system pressure tester and coolant bleeder kit is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suits for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • COOLING SYSTEM VACUUM FILL TOOL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin ma....
Check Stock

Part# 11531705210 11531705220 Engine Heater Pipe & Coolant Water Pipe For B-M-W 3 5 7 Series X3 X5 Z3 Z4 320Ci 323Ci 328Ci 330Ci 325xi 330xi 520i 525i 530i

  • Heater hoses are rubber hoses that circulate engine coolant to and from the heater core, which is the small radiator that provides heat for the cabin. The water pump sends coolant that’s been heated up by the engine to the heater core through the heater hoses. Heater hose runs from the water pump to the heater core, behind the firewall, and from the heater core back to the radiator. Without heater hoses, you’ve got no heat..
  • Coolant Hose is typically a rubber device that manages the coolant flow from an engine’s water pump to the heater. Coolant hose is an essential cooling system in your engine, which would not work without them. Engines produce a lot of heat and coolant hose carries the coolant through the engine at an optimal temperature, cool the engine. It would quickly destroy the engine if left the heat to build up in it..
  • This hose set fits for 2000 B-M-W 323Ci, 1999 B-M-W 323i Chassis: E46, 2000 B-M-W 323i, 2001 - 2006 B-M-W 325Ci, 2001 - 2005 B-M-W 325i , 2001 - 2005 B-M-W 325xi, 2000 B-M-W 328Ci, 1999 B-M-W 328i Chassis: E46, 2000 B-M-W 328i, 2001 - 2006 B-M-W 330Ci, 2001 - 2005 B-M-W 330i, 2001 - 2005 B-M-W 330xi, 2001 - 2003 B-M-W 525i..
  • This hose set fits for 1997 - 2000 B-M-W 528i, 2001 - 2003 B-M-W 530i, 2001 - 2006 B-M-W X5 3.0i, ....
Check Stock

Evolution RAGE355BLADE- 14” Multi-Material Blade , Silver

  • Use with Rage2 14" multipurpose Chop saw and Evosaw380 15" steel cutting Chop saw.
  • Cuts through steel, aluminum, wood and plastic.
  • Produce virtually no heat, burrs, or sparks.
Check Stock

JoyFans Coolant Pressure Tester Kit, Cooling System Coolant Vacuum Refill Kit Automotive Tools Works on Radiator Leak Test & Coolant Fill Purge Service for Cars Trucks Airlift

  • Radiator pressure tester kit performs one-stop cooling system service from leak detection to coolant filling. Professional tools and adapters are complete and suitable for most domestic and foreign vehicle models. Saves you from worries. Simple to use. Use the radiator pressure pump to pressurize the system, locate & troubleshoot leaks. Use the coolant refill tool (work with vacuum pump) to change coolant in vacuum..
  • Coolant pressure tester kit fits GM, BMW, VW, GMC, Porsche, Chevy, Dodge, JEEP, Chrysler and many other domestic and foreign cars, trucks, airlifts, etc., while working with 20PCS dedicated adapters for one-person operating. Fits most models while working with the cone universal adapter, but 2 people are required to operate (one person holds the cone head and the other one pumps up). Manual tester pump with gauge calibrated from 0-35psi /0-2.5bar..
  • Pneumatic vacuum coolant purge refill tool gives efficient flush while feeding the system with fresh coolant under vacuum. Quick and clean technique allows no trapped air to remain. Features quick coupling design. Working range: -60~-50 cmHg (-23~-20inHg). Operate with specific adapters and universal adapter, this cooling system refill tool can fit almost all types of vehicle models, one person ....
Check Stock

Sinister Diesel Coolant Filtration System for Ford 2003-2007 F-250 F-350 & Excursion 6.0L Diesel with All Hardware – No Part Removal or Drilling Required For Filter - Easy Installation

  • MADE TO LAST: When it comes to the quality of our products, Sinister Diesel doesn’t make any exceptions! Our Coolant Filtration System for Ford....
  • INCREASE ENGINE LIFE: As time passes by, the coolant running through you Ford 6.0L Diesel engine starts getting dirty and affect the life of your....
  • MADE TO FIT: We precision cut our Coolant Filtration System Kits to match the truck model for optimal use. This aftermarket liquid coolant filter....
  • EASY INSTALLATION: We want to make sure that installing our aftermarket coolant filter kit for trucks is as easy as possible. This is why we include....
Check Stock

Laboy Glass West Condenser Liebig Reflux Distillation Column with 24/40 Joints 190mm in Jacket Length Organic Chemistry Lab Glassware with 10mm Glass Hose Connections

  • ...ser,with narrow annular space that allows for the increased flow rate of water to provide high cooling efficiency.It consists of an inner straight tube surrounded by an outer jacket tube,the cool water flows through the outer jacket from bottom to top to condensate the vapor in the inner tube. The fused-on narrower coolant jacket may render more efficient cooling with respect to coolant consumption..
  • WIDELY USED-----A west condenser can be both used in a reflux and a distillation apparatus .In the reflux apparatus, just as the graham condenser,Dimroth condenser,coiled condenser,liebig condenser does,it works with round bottom flask, drying tube,separatory funnel or additional funnel.In the distillation apparatus,it used to condense the vapr into liquid and drip to a receiving flask with a take-off adapter..
  • DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connections connecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With a jacket lenght of 190mm.
  • HIGH QUALITY---Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisel....
Check Stock

Genuine OEM Engine Coolant Thermostat Kit For BMW E60 E61 E82 E83 E85 E86 E88 E89 E90 E91 E92 E93 F30 1 3 5 X Z Series 3.0L L6

  • Fit for: BMW E46 E39 E36 E85 Z3 Z4 320i 323i 325i 328i 330i 525i 528i 530i. More detailed compatibilities please see Product Description..
  • A leaking heater pipe line is not only aA coolant pipe is a hard plastic line used to transport coolant between cooling system components. It is usually attached on both ends by coolant hoses, and the coolant pipe can, in some cases, act as a junction to split coolant to other parts. Often, a coolant pipe may be connected between the radiator and water pump, or between the water pump and the heater core..
  • A leaking heater pipe line is not only a waste of engine heat but also a cause of engine damage. Together with the heater hoses, this pipe line is where heated coolant passes through to eventually warm your cabin during winter months. If this pipe or tube is damaged, your coolant level will deplete quickly, thus resulting to heater malfunction and a steaming engine..
  • Please be sure to compare carefully with Pictures or OE number before buying items. If you are not sure this part is compatib....
Check Stock