Top Cooler Drain Plug

Alocs 1.5" Shaft Length Cooler Drain Plug Replacement for Coleman Xtreme Coolers 50 qt, 58 qt, 82 qt (Set of 2)

  • High Quality: Our Cooler Drain Plugs are made of high-quality ABS materials, which are odorless, non-toxic, durable and well sealed..
  • Compatibility: For use on only the 50 qt, 58 qt, and 82 qt Coleman Xtreme Coolers..
  • Coleman Cooler Drain Plug Replacement: Cooler drain plug replacement for Coleman coolers, suitable for the original drain hole..
  • Easy to Install: Remove the drain plug to be replaced, replace it with a new one, and tighten it. Cap seals tight to prevent leaks..
  • Package: The coleman cooler accessories include 2 drain spouts, 2 rubber gaskets, and 2 drain caps..
Check Stock

PROSOCOOL Cooler Drain Plug Replacement for Coleman Xtreme Coolers Ice Chest 50, 58 and 82 Qt -1.5" Shaft Length Drain Plug Kit

  • Compatible with 50, 58 and 82 Quart Coleman Xtreme Coolers.Replacement Plug are compatible with some Coleman 120 QT models, Please Measure Your Original Size Before Purchasing. The Drain Plug Assembly including: Cap, Main Shaft, and Rubber Gasket..
  • Double check your cooler's drain plug hole size and cooler wall thickness. This is NOT a Universal Drain Plug for Coleman Coolers as other sizes are available..
  • Replaces Part Number: 5010005241, Fit Model 6020. Shaft length: 1-1/2". Shaft diameter: 3/4".The Drain Spouts are vulnerable to damage, and when they are damaged, your cooler leaks, not good. This solves the problem much more cheaply than buying a new cooler..
  • If you can accept a small modification to your freezer or this plug, it will be compatible with your.
  • After Modification, Compatible with 60qt ,/Gott 80 qt and more.The drain plug length was perfect. The "male" part will easily fit inside the original opening inside the cooler but to screw on the plug /ring on the outside you will need to shave about 1/8th of an inch around the hole and it will fit ....
Check Stock

Cooler Drain Plug Replacement Compatible with Yeti's Line of Roadie and Tank Coolers and RTIC Coolers Leak-Proof Accessories

  • 【Compatibility】--- Cooler Drain plug fit for Compatible with Yeti, Roadie Coolers, and TANK Ice Buckets and RTIC coolers( This is Non-Original Aftermarket Parts ).
  • 【Improved Design】 ---Replacement drain plugs improved finger knob design allows for much easier finger leverage to open and close the drain.It's designed to drain when partially open without having to fully remove the plug.
  • 【Good Replacement 】---Drain plugs with leak-proof design replace your old or broken cooler drain plugs perfectly..
  • 【Easy Use】---Easy to use these replacement drain plugs to drain the cooler water while drain plug is partially open,Tighten the leak-proof drain plug is good for prevent the cold loss from your Coolers..
  • 【Premium Quality】--- Replacement drain plugs is is made of durable material, easy flowing, rugged..
Check Stock

Cooler Drain Plugs Replacement Compatible with Yeti/Rtic 20 35 45 65 110 Cooler,Small Drain Plugs with Leak-Proof Design

  • ❤Compatibility:--- This Cooler Drain plug Compatible with Yeti, Roadie Coolers, and TANK Ice Buckets and RTIC coolers.(This is Non-Original Aftermarket Parts).
  • ❤Improved Design :---Replacement drain plugs improved finger knob design allows for much easier finger leverage to open and close the drain.It's designed to drain when partially open without having to fully remove the plug.
  • ❤Premium Quality:---Replacement drain plugs is made of durable ABS plastic material, which is very strong and leak-proof, and can be applied for a long time.
  • ❤Good Replacement :---Drain plugs with leak-proof design replace your old or broken cooler drain plugs perfectly..
  • ❤Easy Use:---Easy to use these replacement drain plugs to drain the cooler water while drain plug is partially open,Tighten the leak-proof drain plug is good for prevent the cold loss from your Coolers..
Check Stock

Cooler Drain Plugs Compatible with Yeti's Line of Roadie ,Tundra and Tank Coolers and RTIC Coolers Leak-Proof Accessories Pack of 2

  • ❤Compatibility:Black Cooler Drain plug Compatible with Yeti, Roadie,Tundra Coolers, and TANK Ice Buckets and RTIC coolers.(This is Non-Original Aftermarket Parts).
  • ❤Improved Design :Replacement drain plugs improved finger knob design allows for much easier finger leverage to open and close the drain.It's designed to drain when partially open without having to fully remove the plug.
  • ❤Good Replacement :Drain plugs with leak-proof design replace your old or broken cooler drain plugs perfectly..
  • ❤Easy Use:-Easy to use these replacement drain plugs to drain the cooler water while drain plug is partially open,Tighten the leak-proof drain plug is good for prevent the cold loss from your Coolers..
  • ❤Premium Quality:Replacement drain plugs is is made of durable material, easy flowing, rugged..
Check Stock

Igloo Replacement Threaded Drain Plug

  • Fits Igloo coolers with an approx 1 inch outer diameter drain plug hole and approx 1-1/16 inch cooler wall thickness..
  • Threaded cap seals tight to prevent leaks. Plastic tether helps prevent cap loss..
  • DOUBLE CHECK your cooler's drain plug hole size and cooler wall thickness. This is NOT a universal drain plug for Igloo coolers, as there are other....
Check Stock

Cooler Replacement Parts Kit, Ice Chest Plastic Hinges, Threaded and Triple-Snap Drain Plug, Latches and Stainless Steel Screws Combo, Plastic Cooler Replacement Set

  • : Cooler replacement parts help to replace the broken parts of your ice chest and Igloo cooler.It’s easy to replace the cooler parts. The assembly instruction is included to make you understand the installation..
  • : Cooler replacement parts contain of threaded drain plug, triple drain plug, latch posts and hinges. The hinges and the latches are interchangeable with all current and original style Igloo cooler hinges and latches..
  • : Tough plastic material provide better using experience, the Igloo cooler parts are rugged and durable for long cooler life.
  • : 1 drain plug assembly-snap(fits Igloo 25-70 quart coolers). 1 drain plug assembly-threaded(fits Igloo 50-165 quart coolers). 4 hinges,16 stainless steel screws(fits Igloo 25-165 quart coolers). 2 latches, 6 stainless steel screws,1 assembly instruction(fits Igloo 50-165 quart coolers)..
  • : Please note that we are always here to help you. Please contact us through Amazon if you have any questions or inquiries..
Check Stock

ROLLMOSS Cooler Drain Plug for Yeti Cooler Plug Replacement Accessories for Yeti, Cooler Wheels Compatible with Yeti's Line of Roadie, Tundra, and Tank Coolers Fit ORCA Coolers (Red, 2 Pack)

  • 【Compatibility】Ergonomically Improved Drain plug, Perfectly fit for Yeti, Roadie, Tundra Coolers, and TANK Ice Buckets and RTIC coolers. It DRASTICALLY Improves the Ability to Easily Open Your Cooler Drain in All Kinds of Cold, Wet or Slippery Conditions..
  • 【Very Convenient Design】Improved finger knob design which can allows for much easier finger leverage to open and close the drain. So you only need to partially open the drain plug to drain without having to fully remove the plug..
  • 【Durable Construction】The Leak-Proof, Rugged Drain Plugs Allow Your Cooler to Drain While Only Partially Open. An Ergonomically Improved Twist Drain Plug Compatible With Yeti Line of Roadie, Tundra, and TANK Coolers..
  • 【Easy Use】When the drain plug is in a partially opened state, the drain plug drains the cooling water. Tightening the leak-proof drain plug helps prevent the cooling water from being lost from the cooler..
  • 【Customer service】Our aim is to provide Top Level Customer Service, and we are always standing by to solve any of your problems. If you have any question, please....
Check Stock

WELWIK 2 Sets Cooler Drain Plug Replacement Triple Snap Drain Plug Cooler Plug Assembly for Coolers 1.1 Inches/ 2.8 cm Shaft Length, White

  • The cooler drain plug is equipped with a leak-proof gasket, which is tightly sealed to prevent leakage, and the cap is retained to help prevent the cap from being lost..
  • Cooler plug is made of high-quality plastic material, odorless.
  • resistant to dirt, can keep the drain hole of the cooler clean..
  • Drain cover total length 3.9 inches/10 cm, gasket diameter 0.8 inches/2 cm, nut length 1.3 inches/3.3 cm..
  • The cooler drain plug is equipped with a leak-proof gasket, which is tightly sealed to prevent leakage, and the cap is tied to help prevent the cap from being lost..
  • There are 2 drain caps, 2 nuts and 2 washers in the package. Please check whether this product is suitable for your cooler before buying..
Check Stock

Honoson 3 Sets Cooler Drain Plug Cooler Plug Replacement Triple Snap Drain Plug Cooler Plug Assembly for Coolers 1.1 Inches/ 2.9 cm Shaft Length, White

  • Cooler size: the drain cap is 3.9 inches/ 10 cm in total length, and the gasket is 0.8 inch/ 2 cm in diameter and 1.1 inch/ 2.9 cm shaft length, and the nut is 1.3 inches/ 3.2 cm in total length.
  • Please check whether this product is suitable for your cooler before purchasing.
  • Note: please confirm whether the shaft length is suitable before purchasing.
  • Quality material: the cooler plug is made of quality plastic material, which is odorless, safe and reliable.
  • It is dirt resistant and can keep the drain hole of your cooler clean.
  • Leak-proof design: the cooler drain plug is equipped with a leak-proof gasket, which seals tight to prevent leakage and the tethered cap helps to avoid cap loss.
  • Easy to install: the replacement triple snap drain plug is simple to use, with no other tools required.
  • You just need to pass the plug through the cooler and tighten it with a nut and a washer.
  • You will get: there are 3 pieces of drain caps, 3 pieces of nuts and 3 pieces of gaskets in the package.
  • The size is proper and the quantity is enough for you and your family to use.
Check Stock

Drain Plugs Replacement for RTIC Coolers,Compatible with RTIC 20QT 45QT 65QT with New 2 Drains Coolers Large & Small 2 Pack

  • COMPATIBILITY: The RTIC Compatible Large & Small Drain Plug Combo Pack Is An Improved Design That Fits Specifically With the RTICs New 2 Drain....
  • PACKAGE CONTAINS: This Package Includes Both RTIC Replacement Plugs Used in the “Dual Drain Plug System” – One Small Plug and One Large Plug..
  • PERFECT SIZE: An Oversized Drain Plug on One Side of the Cooler to Allow Faster and Easier Draining..
  • GOOD REPLACEMENT: The Beast Cooler Dual Drain Plug Kit Contains Both the Large and Small Drain Plugs Specifically Made to Be Compatible With the RTIC....
  • EASY TO USE: Drains Easily and Has a Standard Sized Drain Plug on the Other Side With an Integrated Vacuum Relief Valve for Easier Opening of the....
Check Stock

48-22-8462 Fits for Milwaukee PACKOUT 40QT XL Cooler

  • DESCRIPTION: The for Milwaukee 40QT XL Cooler keeps food and beverages cold with the ability to hold ice for 5 days. The for Milwaukee 40QT XL Cooler is constructed with an impact resistant body for ultimate jobsite durability. This jobsite cooler is IP65 rated to withstand harsh environments and jobsite debris..
  • The 40QT XL Cooler features an integrated bottle opener, drain plug, interior storage tray, and food-grade cutting board/divider for maximum versatility on and off the jobsite. As part of for Milwaukee modular storage system, the 40QT XL Cooler allows you to customize your storage system to keep tools and accessories organized..
  • HIGHLIGHTS: Holds Ice for 5 Days, Impact Resistant Polymer Body, IP65 Rated Protection, Drain Plug, Food-Grade Cutting Board/Divider, Interior Storage Tray, Integrated Bottle Opener, Modular Connectivity with ALL Components..
  • Fits For Milwaukee 48-22-8462 includes: 1x 48-22-8462 Divider for PACKOUT XL Cooler.
Check Stock